There's no reason to disassemble your Flipper unless there's something wrong with it. If you really have to do it, please be gentle. Hope this helps someone.
Care to share where you got the strap from? Looks kind of handy not just for a flipper but for some other things I could really use a quick release strap on.
all these tiktok script kiddies making videos about this. finally a real hacker that wants to open it and see how its made. thats the true hacker mentality
Excellent video. Just received my black fz this week and I'm having fun with it even on the stock upgraded firmware. Do you plan on updating to a alternative firmware,
I wasn’t really looking at alternative firmwares, tbh. Think it might still be to early for that, since we still haven’t got to official 1.0.0 yet. Which one would you recommend keeping an eye on?
Looking for some insight, I opened mine but it was slightly difficult than usual and the result was those small antennas/pins (GPIO 17 for ibutton I think came off ) is it a simple solder or some type of glue?
Can someone please help me? When taking the back apart, I accidentally stripped the screws so I had to break the back shell off and while doing that I accidentally broke the back pins, am I able to reattach those somehow? Maybe heating up bottom of the pin and reattching it? The pins came of very cleanly, so I assume this is possible?
Are you able to take off the speaker board without needing to spilt the 2 sides (the side with the screen, and the side with the buttons) I need to replace my speaker but don’t want to risk breaking it so much
My Flipper Zero has died. I had it for about one year, scarcely used. I updated with custom but it was behaving a bit weird so I reinstalled with the official again and then it just died. It doesn't turn on and DFU mode does not work either. So I guess it is not about battery or damage in any other way... any ideas? I'll take it apart and check the battery, other than that I don't know... O_x
Replacing it shouldn’t be too hard, but getting a screen that works might be. AFAIK they’re still not selling any replacement parts, and the screens were ordered specifically in bulk. You should totally poke their support though to show that there’s demand for things like screens and batteries. If you get your hands on a replacement screen you might need a soldering iron to to de-solder the old one at two points (I think they’re not only holding it in place but supplying power to the backlight as well). Also it might be just glued to the backlight part somehow, not sure about that. The flat flex cable is easy to disconnect and reconnect. P.S. the screen PN is ERC12864FAMF03-1-S7 by EastRising.
@@agathakazar Thanks alot for your reply. if i know pins or model number, my be i can search on Ebay. It should be standard screen. and ebay if full with rresbari Pi and other etc screens. What you say ?
Hi. I've a bad experience with my device. Just arrive 3days ago, and battery doesn´t work. Looking the logs of the device, I do not read anything wrong about battery. What can I do? there is any solution? thanks!
Trenton’s comment was deleted. So I’ll repost. Be careful. Watch at 5:50. You just about break a clip. This is not proper disassembly. I don’t want anyone to hurt their dolphin toy. Especially SE Black. 😢 I just missed the limited clear proto flippers. It cool tho. TAKE EVERYTHING APART. ALL OF IT. ITS YOURS. just be careful and don’t break clips homies.
want to buy myself one as well though i’m not broke, just worried i won’t get it. Customs in many countries have been seizing them, and paypal froze these guys accounts (they were only using paypal) so it’ll be a long time before any new shipments will go out more than likely if at all.
The glue felt really strong, but that’s probably so that the battery won’t rattle inside. I wouldn’t have anything to complain about if there would be replacement batteries for sale later, but we’ll just have to wait and see.
pretty intense hardware. Second day with the floppa and I am in full control of the lights and fans lol
thankss, it is the only flipper hardware video in yt
Thanks for the vid!, Mine came with a pinched battery cable, this video helped me go in and fix the pinch!
Thanks for making this video!
i like the black cover
Care to share where you got the strap from? Looks kind of handy not just for a flipper but for some other things I could really use a quick release strap on.
all these tiktok script kiddies making videos about this. finally a real hacker that wants to open it and see how its made. thats the true hacker mentality
Lol
большое спасибо. это очень информативно. ))
Where can I get one of those beautiful wrist straps?
Excellent video. Just received my black fz this week and I'm having fun with it even on the stock upgraded firmware. Do you plan on updating to a alternative firmware,
I wasn’t really looking at alternative firmwares, tbh. Think it might still be to early for that, since we still haven’t got to official 1.0.0 yet.
Which one would you recommend keeping an eye on?
Unleashed Firmware is awesome, removed TX restrictions, added features like spectrum analyzer, sub-ghz rolling code stuff, bruteforce MiFare, etc...
Nice video!
Looking for some insight, I opened mine but it was slightly difficult than usual and the result was those small antennas/pins (GPIO 17 for ibutton I think came off ) is it a simple solder or some type of glue?
The little springy thingies? They should be soldered to the small pcb and they need to be conductive for the ibutton stuff to work.
Thank you for your video
Can someone please help me? When taking the back apart, I accidentally stripped the screws so I had to break the back shell off and while doing that I accidentally broke the back pins, am I able to reattach those somehow? Maybe heating up bottom of the pin and reattching it? The pins came of very cleanly, so I assume this is possible?
Are you able to take off the speaker board without needing to spilt the 2 sides (the side with the screen, and the side with the buttons) I need to replace my speaker but don’t want to risk breaking it so much
Yes, actually the speaker is on the separate smallish ibutton PCB. The one with the thin flex cable, long pins and the IR diodes.
Solid video!
My Flipper Zero has died. I had it for about one year, scarcely used. I updated with custom but it was behaving a bit weird so I reinstalled with the official again and then it just died. It doesn't turn on and DFU mode does not work either. So I guess it is not about battery or damage in any other way... any ideas? I'll take it apart and check the battery, other than that I don't know...
O_x
Loved it
Do you think that LCD can be replaced? my LCD broke completly. I am able to use it only with PC.
Replacing it shouldn’t be too hard, but getting a screen that works might be.
AFAIK they’re still not selling any replacement parts, and the screens were ordered specifically in bulk. You should totally poke their support though to show that there’s demand for things like screens and batteries.
If you get your hands on a replacement screen you might need a soldering iron to to de-solder the old one at two points (I think they’re not only holding it in place but supplying power to the backlight as well). Also it might be just glued to the backlight part somehow, not sure about that.
The flat flex cable is easy to disconnect and reconnect.
P.S. the screen PN is ERC12864FAMF03-1-S7 by EastRising.
@@agathakazar Thanks alot for your reply. if i know pins or model number, my be i can search on Ebay. It should be standard screen. and ebay if full with rresbari Pi and other etc screens. What you say ?
Here’s a link to the data sheet: www.buydisplay.com/download/manual/ERC12864-1.3_Series_Datasheet.pdf
I think Flipper screen is “amber”
How can i get this in india
Hi. I've a bad experience with my device. Just arrive 3days ago, and battery doesn´t work. Looking the logs of the device, I do not read anything wrong about battery. What can I do? there is any solution? thanks!
Heya, you should email support@flipperdevices.com and ask for a replacement, battery gauge problem is a well known case afaik.
thank you
how did u get a black flipper zero?
Slave labor…
With me being the slave to the dolphinarium XD
@@agathakazar just tell me which website to report
Trenton’s comment was deleted. So I’ll repost. Be careful. Watch at 5:50. You just about break a clip. This is not proper disassembly. I don’t want anyone to hurt their dolphin toy. Especially SE Black. 😢 I just missed the limited clear proto flippers. It cool tho.
TAKE EVERYTHING APART. ALL OF IT. ITS YOURS. just be careful and don’t break clips homies.
could someone buy me one im broke
want to buy myself one as well though i’m not broke, just worried i won’t get it. Customs in many countries have been seizing them, and paypal froze these guys accounts (they were only using paypal) so it’ll be a long time before any new shipments will go out more than likely if at all.
Could copy this & make this ?
Dunno, sounds pretty hard, but the schematics are open source
Though of the same thing... everything is fine but that's the alternative hardware for rfid
Salad fingers anyone.. or rusty spoons
I want to buy in india
где можно купить все компонеты?
Возможно где-то в Китае (официального магазина компонентов нет)
I broke it 😢
Watched at 2x speed and it was informative
The battery being glued in is *exceptionally* disappointing. I can't believe they made such an unfriendly design choice.
The glue felt really strong, but that’s probably so that the battery won’t rattle inside.
I wouldn’t have anything to complain about if there would be replacement batteries for sale later, but we’ll just have to wait and see.
@@agathakazarcan you give it to me
Хей, итс агафа 🧀
Hai, Agata desu! 🎴