How to Make 12V Lithium Battery to replace the Old 12V UPS Battery || 12V LiFePo4 || 12V Li-Ion

#diylithiumbattery #opengreenenergy #18650batterypack
In this video, I will show how to make a 12V Lithium battery by using 18650 and 32650 Batteries.
I have designed 3D printed case for these batteries with a size nearly equal to the traditional 12V UPS battery.
I have also added BMS to protect the battery pack from different abnormal situations. Also added a capacity meter to check the voltage and capacity of the battery pack.
Your one-stop PCB prototype Partner PCBWay: www.pcbway.com/
For good quality Lithium batteries in India: voltalithiumhu...
Link to download 3D printable STL files:
www.thingivers...
Battery Specifications:
----------------------------------
1. LiFePo4 Battery : 12.8V / 6Ah , 830g
2. Li-Ion Battery - 11.1V / 18.2 Ah, 1250g
Note: Before using these batteries check the charger specification of your UPS. Usually, the 4S LiFePo4 battery pack is more suitable for this application because of its nominal voltage of 3.2V.
-----------------------------------------------------------------
Parts Used:
1. 32650 LiFePo4 Battery
2. 18650 Li-Ion Battery
3. Capacity Meter: amzn.to/3OAHpar
4. XT60 Connector:amzn.to/3xPkeTd
5. 14AWG Wires: amzn.to/3OzNHXL
6. 4S BMS - LiFePo4: amzn.to/3tZdDEp
7. 3S BMS - Li-Ion: amzn.to/3zZUF4w
8. Nickel Strips: amzn.to/3xRvVc0
-----------------------------------------------------------------
Tools Used:
3D Printer: amzn.to/3DhYhhY
Spot Welder: bit.ly/2TRmp8O / bit.ly/3AonCFw ( Use Coupon code OGE2021 for 3% Off )
Soldering Iron:amzn.to/3vaJkvu
Wire Stripper: amzn.to/3zWSzlV