Build the datsun man it'd be fun with a LS for sure but you would want to spot weld the frame or reinforce it someway the older japanese cars like that are made of cheap metal and it would probably twist or even crack/break.
Muscle Vs Tuner start on the datson that would be the smartest decision to make because once your done with that then ypu can start on the challenger and end on the ram
Bobby, super happy to see you back! Anyhow here's my 2 cents, if you do the LS stuff with the Datsun that my #1, but if you turbo the stock engine or doing bodywork on it instead that would make my #1 the Challenger supercharger, hope this helps.
Im waiting for an Edelbrock E-force to be delivered and will keep you posted as soon as it is installed on my 2014 Challenger RT. Please check them out they seem to be the most dependable and reliable out there.
I think the most fun would be camming and supercharging the challenger but I think the datsun you should do first and then put some money to the side until you get enough money to get a supercharger/camshaft.
Slap a cam that's designed for boost applications , then work on the Datsun then later on go down the blower path, that way you get the best of both worlds cammed + boost , cammed doesn't mean no boost lol.
I vote for the Datsun. For one thing, once the datsun is done you can save up for the challenger then while the challenger is being worked on you can drive the datsun.
Start getting your engine ready for the supercharger? That would be like saving up, but still providing content while also working towards ultimately getting the actual supercharger.
Do the datsun! That will give you exercise(not trying to be a dick, I am a big guy too and also trying to sweat more under the engine bay). That kind of content I would love to watch.
I would like to see datsun stuff first. Then ricer truck would be my second choice. Challenger is jush meh to me. Datsun build and ricer truck shit just seems fun
You should look into a 1UZ swap for the Datsun. It's Japanese, but also a V8, and it sounds insane. It's made by Lexus/Toyota. I'm sure you can get one relatively cheap as well. Just an idea.
Put a cd009 or cd09 behind their much better because only 6 gear is overdrive in the cd transmissions, the t56 is double overdrives so gears 5 and 6. Also cd transmissions are much cheaper
If I were you I would save the money to supercharge the challenger. Don’t spend money right now on modding the truck and then after supercharging the challenger work on the Datsun. 💯
I would say do not blow up the Datsun, because however small the return is, you could still get some money for the engine and trans. Edit: What happened with Ford recently?
Bobby, just sell the Datsun, doing that swap is way over your skill set, and you would be relying on other people to help/do it for you, take the sale price from the Datsun, put headers/exhaust on the Daytona, save towards the Challenger build, that would be your best investment. I've offered to buy the datsun several times
Youre gonna need to spot weld the datsun cuz the chassis wont be able to handle the power. The frame will twist or even crack. Japanese metal was really crappy back in the day. Cali blue plates were used in 70s-80s not sure if it was used in the 60s tho. Black plates are currently an option and i think also used in the 40s-50s but dont quote me on that one
Yeah I was worried about frame twist but was thinking maybe a full roll cage would help with that. I know someone who used to build them for dirt track cars that could help me out.
I believe that the challenger is fine the way it is, and the Datsun should be #1 priority. The truck is... meh. I'm getting sick of it. Its a truck. Tow 'n' go. If not build something. That's why I like the datsun, and maybe vlog man. ✌🤙
Make sure to support the channel and go check out Dollar Shave Club!
www.dollarshaveclub.com/mvt
Muscle Vs Tuner start on the datsun
Build the datsun man it'd be fun with a LS for sure but you would want to spot weld the frame or reinforce it someway the older japanese cars like that are made of cheap metal and it would probably twist or even crack/break.
Pls work on the Datsun
Says a guy with a beard. You should shave for us and give a demo of that product.
Muscle Vs Tuner start on the datson that would be the smartest decision to make because once your done with that then ypu can start on the challenger and end on the ram
Yes... Cam the Challenger and feel the power! port the intake, stall, cutouts...
Doesn’t matter what you do man just keep grinding. You need a channel like streetspeed but with mopars
Gonna really need more content!
Datsun build sounds fireee
We have been blessed with another video
Bobby, super happy to see you back! Anyhow here's my 2 cents, if you do the LS stuff with the Datsun that my #1, but if you turbo the stock engine or doing bodywork on it instead that would make my #1 the Challenger supercharger, hope this helps.
this man just took up all my storage an space.....HELLLLLLLLLLP
Datsun bro love to c it done okuse give u lots of content to save up for other projects!!!
Do the Datsun, it's why I'm still subscribed
I'm actually loving the ricer truck content but doing a junkyard build on the Datsun would be sick. Try to build it as cheap as possible lol
Id love to see the datsun get built.
I would like to see the DATSON as an upcoming build Bobby
I would enjoy Datsun. It seems to be the less expensive option, and it’ll give you something to do and keep us entertained.
Bobby do what you can afford, the cheaper the more you can do!
Bobby please dont give up on this channel, please dont give up on every obstacle you're facing right now, we got your back man ❤💪
Arnulfo Pinales hell yeah bro, keep this channel alive!
Ever thought about trading the Challenger in for a Scat Pack. It's not a full SRT but the 6.4 is awsome. Some even come with brembos.
Either ls swap the Datsun or keep working on the ricer truck. Glad to hear the progress on your weight loss, keep up the good work!
Stroker kit for the Challenger dude!
Bobby, you are getting bigger and bigger brother. Come on son. You ain’t going to live long you get much bigger.
Im waiting for an Edelbrock E-force to be delivered and will keep you posted as soon as it is installed on my 2014 Challenger RT. Please check them out they seem to be the most dependable and reliable out there.
It's Datsun time!
Have some fun with the datsun
Start on the datsun!
Challenger! Challenger! Challenger!
I think the most fun would be camming and supercharging the challenger but I think the datsun you should do first and then put some money to the side until you get enough money to get a supercharger/camshaft.
I would just start on the datsun. It seems the most cheap/fun and if you do that then the ricer truck and the challenger are still guaranteed fine.
Do the Datsun would be a cool build
Datsun, it’ll be worth it in the end, and plus if your low on money and it’s good shape you could sell it after awhile for quite a bit
Pls do the ebay turbo on the datsun that would be sick
get the datsun going. by far the coolest one. that way you still have a challenger as a daily
work on the datsun its long over due
Turbo! Blow it up! Blow it up!
DATSUN sounds good
Datsun work on it would be cool to do like a eBay turbo or something on it
The CHALLENGER MAN!!!!!
Start on the Datsun. Since it's cheaper, you can save side $ for the Ricer Truck.
Start in the Datsun
Datsun! Drift that thang!
Dotson, no question. Don't worry about the body. Just 5.3 and kill it
VH45 datsun swap! Itll cost more than a 5.3 but I think it would be super cool, though I might be bias as I'm currently working on a VH45 swap myself
I think you should do the Datsun it's original and no one else is doing it and I really think that would help you boost your Channel
Scrap all ideas and make a ebay turbo civic 4 banger build, forged everything 600whp for like $5k
Slap a cam that's designed for boost applications , then work on the Datsun then later on go down the blower path, that way you get the best of both worlds cammed + boost , cammed doesn't mean no boost lol.
Datsun for sure
Datsun bro don’t over think it
I vote for the Datsun. For one thing, once the datsun is done you can save up for the challenger then while the challenger is being worked on you can drive the datsun.
Do the challenger!
You could take advantage of me being on vacation from work this week for us to install the lowering kit.
I would love to exploit our friendship for your mechanical services.
I’d go for the Datsun bro
I bet you have time for the next buffet Slim...DUDE. SERIOUSLY... DO YOU NOT GIVE A SHIT ABOUT LIVING TO 30? I HOPE THE BEST FOR YOU MAN.
I just seen someone selling the full whipple setup for 4k
Start getting your engine ready for the supercharger? That would be like saving up, but still providing content while also working towards ultimately getting the actual supercharger.
Or save up and trade in your Challenger for something like a ScatPack/HellCat (6.4L/6.2L SC)
Bobby how the fuck are you going to try to sell us razors when you don't even shave
is that the Harbor Freight work bench behind him?
Go with the datsun
Do a datsun at last!!!
Nice consistency on the uploads mvt! Don’t give up on the weight loss bro you will never regret taking care of yourself bro.
Datsun!
Do the datsun! That will give you exercise(not trying to be a dick, I am a big guy too and also trying to sweat more under the engine bay). That kind of content I would love to watch.
Bobby, 2 months since your last video man ?????
I would like to see datsun stuff first. Then ricer truck would be my second choice. Challenger is jush meh to me. Datsun build and ricer truck shit just seems fun
build the datsun please
I thought the Datson was Ryan’s? Lol
You should look into a 1UZ swap for the Datsun. It's Japanese, but also a V8, and it sounds insane. It's made by Lexus/Toyota. I'm sure you can get one relatively cheap as well. Just an idea.
Put a cd009 or cd09 behind their much better because only 6 gear is overdrive in the cd transmissions, the t56 is double overdrives so gears 5 and 6. Also cd transmissions are much cheaper
The. Datsun. But. With. A. Rb26. Please.
Do the Datsun
eBay turbo build fuck it 😂
I personally would go with the Datsun first since it’ll be more unique for a build
If I were you I would save the money to supercharge the challenger. Don’t spend money right now on modding the truck and then after supercharging the challenger work on the Datsun. 💯
BlackandYellowCamaro yeah man a supercharged rt with an auto will be a consistent monster on the strip!
Ricertruck!
I would say do not blow up the Datsun, because however small the return is, you could still get some money for the engine and trans.
Edit: What happened with Ford recently?
I vote Datsun. I used to have a 77 that I put a 350 in 20 years ago. So I think it would be cool to see how your z turns out :)
Do what you've gotta do. Love the content either way
More mods on ricer truck .to meny moded challengers
Challenger please
You won’t be able to call the ricer truck the ricer truck if you make it fast. 😂
Bobby, just sell the Datsun, doing that swap is way over your skill set, and you would be relying on other people to help/do it for you, take the sale price from the Datsun, put headers/exhaust on the Daytona, save towards the Challenger build, that would be your best investment. I've offered to buy the datsun several times
Youre gonna need to spot weld the datsun cuz the chassis wont be able to handle the power. The frame will twist or even crack. Japanese metal was really crappy back in the day.
Cali blue plates were used in 70s-80s not sure if it was used in the 60s tho. Black plates are currently an option and i think also used in the 40s-50s but dont quote me on that one
Yeah I was worried about frame twist but was thinking maybe a full roll cage would help with that. I know someone who used to build them for dirt track cars that could help me out.
I’d go for the truck
If you had focused more on the channel you would of been able to buy the supercharger kit
I would say challenger. you said that was the mod you wanted so save up and do that.
Do the DATSUN
Not trying to be that guy but if you lose 250 pounds=40hp and do heads cams and a tune maybe a lil spray would be much faster
Gotta hand it to ya presenting the DSC stuff on the back of the Ricer Truck
Datsun.. thx
Daaatsun
I think the Datsun because its less funds so it means more videos right?
As far as the actual Procharger unit, Procharger offers pre-owned certificated units that are rebuilt by them in house all new guts
If u can’t Dodge it Ram it
Pro charge the challenger!
I like how u put the idea a cam into the air 🤔
do the datsun
Bet he wouldn't think twice about spending 7 grand at McDonald's
I say go for the challenger budd
I believe that the challenger is fine the way it is, and the Datsun should be #1 priority. The truck is... meh. I'm getting sick of it. Its a truck. Tow 'n' go. If not build something. That's why I like the datsun, and maybe vlog man. ✌🤙
For the love of god start on the fucking Datsun already. You been been promising to start building the datsun for a year now, and still nothing.
Good guy but what happend to the blonde hair dude
Save up for the challenger bro!