Volvo S40/V50 Shifter Blind Repair 🇸🇪.. 🚙
Vložit
- čas přidán 26. 05. 2020
- Volvo Shifter Blind Repair On Late Model S40/V50.
Thank you guys for watching please Subscribe and give it a big thumbs up..
Volvo Shifter Blind part #8699465
Disclaimer:
Due to factors beyond the control of Mechanic Gio, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Mechanic Gio, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Mechanic Gio.
Thank you so much Gio... You save me from hell!
I've just stopped in the middle of the road by this problem.
Glad this help
I’m flying now thanks to you. Revving to the moooooooooooooonnnnnn!
Glad to hear
Excellent video. Straight to the point and with all the caurionary advices.
thanks a lot bro i just replaced mine today! a small tip for anyone doing this: when putting the gear knob back in place, first put the ring in the knob's shaft (but don't insert it fully on the knob, just enough to be around the closing plastic 'skirts' - otherwise you wont be able to put the whole set back in the main shaft). After that, insert the set into the shaft till the end. Once in the shaft, you just rotate the ring clockwise and upwards very easily and its gonna close it properly.
Glad it helped
Thanks for the video just replaced my broken one today.
Thank you. Will be performing this repair on my S40 soon.
Had the same problem, thanks a lot for your video. It helped a lot! :)
Man...if you lived in Iowa I'd buy you a steak dinner. VERY helpful and confidence-building! This got my manual-mode working and ready for a trip to the Rockies! Thanks again!
Thank you for watching my video brotha and glad it help you out.. any more help on anything feel free to contact me
@Scorpion 212 how can I help
You
Its been 2 yrs since i have used my s40 due to the shifter not working. Definitely gonna have to try this out! Thank you
This will fix it
Great video. Thank you for all your help!!!
Спасибо хороший человек. Отремонтировал свою Ваську.
Super helpful information thank you
Thanks.this really helped
Wow very good job l really apréciate bcse l learn every day with guys on you tube God bless you
Helpful video...interior of that car is filthy though haha
Tx from chile- gracias desde chile !
Great Job! 👍
Very helpfull!!
Magnet polarity makes a difference. 2009 C30. I bought a blind, but once fitted the manual gear selection did not show. I removed it, put the original magnet slider in the new blind and it worked. The original slider was marked POM3, the new one POM2. if you put the faces of the two sliders togther, they attract, if they were both the same polarity they would repel.
You are correct glad you caught it
CAUTION: WARNING:
Great video save 1 item. Gearshift knob breaks if removed this way. Mine now spins. Volvo said the entire console must be removed, remove parts from bottom up To do it properly.! I now have hundreds to spend to replace the knob.
Dealer did say use JB plastic steel to cement the collar to the knob, then collar to shaft as a cheap fix.
What do you mean
Hello, I noticed a small silver magnet located in the top left area when you first lifted the lower cover off, but it is gone when you put the shifter blind back on. Was that magnet leftover from the previous blind?
Excellent, thank you so much!
Your welcome
Are you replacing the synchromesh?.
The Shifter Blind is upside down but other than that Thank You So Much for a flawless Step by Step guide ! You made it so easy and fast
I keep in reviewing the video I dnt understand the upside down part
@@WrenchingMafia I don't think it could go the other way; if the magnet were down, it would bend the part and it wouldn't fit. It's possible to insert the slider into the blind inverted, but then the blind wouldn't fit back on the shifter.
@@morganahoff2242 I seen where the old magnet fell apart and got stuck in there, also did you make sure you cleaned everything very well
I replaced the Shift Blind (thanks, your video matches the model I have most closely) but after I put it all back together, the Manual Mode still doesn't work. What could have gone wrong?
HAs the old magnet stuck to the shifter, I seen this happen before
Great
Cambie la pieza , pero sigue igual. Lo compre alternativo, es mucha diferencia con el original?? O será algún fusible
What is that Sensor called
Question mate from across the pond UK 🇬🇧 can I swap a manual console for an automatic console in other words move one from one car to the other car they are both s40s. But one is a manual and the other is an auto. Thanks for your answer in advance. Great video by the way
You could buy you can get some shifter messages on the dash
@@WrenchingMafia ahh I didn't think of that. I've got 2 volvo's and the 2.4 console is aluminum and has some dents in it. While the 1.8 has a wood affect which I really like.
It's a shame I couldn't just take the wood effect one and just put it over the one with aluminum .
It looks like I'm going to have to put my hand in my pocket and by the wood effect one. Thanks for your help once again and I had subscribed ✔👍🏿
@@WrenchingMafia quick question mate. If i take out a single CD player and put in a 6 CD player will it work.
Oh and I'm still fighting to get the harness wire out to connect it to the amp. From my old Volvo s40 1.8 to put it into the 2.4 Volvo 😁 thanks for your help 🇬🇧
I can’t get the knob off??
Hi Gio how can you order the part, do you recommend a website.
Best bet is to ordered it through your dealership lifetime warranty
Bruh I fucking penny got under there. Shits annoying frfr but thanks for the video
Did he not put the blind in upside down? On My C30 the smooth side was down. Now it's destroyed and I have the replacement part. Why I'm watching this video.
Charles Hess customers car
Disclaimer:
Due to factors beyond the control of Mechanic Gio, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Mechanic Gio, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Mechanic Gio.
Yes he did. I just did it in my 2008 S 40 and his directions were upside down
On my 2010 S40 the smooth side is up, just replaced it today and I double checked it as the broken bits were all smooth side up
Yes thank you..with smooth side down even fits better in the tract and I put light lube grease on it
Wait.... So is it smooth side up or down?! Lol
Lol the back of my handbrake is broken too
Oh no
I got the problem and will NOT do that tutorial because it's crazy to dismantle a whole car for this but thanks anyway
Орм