No Prep Drag SHOWDOWN !! - Traxxas Drag Slash vs Team Associated DR10
Vložit
- čas přidán 23. 10. 2021
- No Prep Drag Showdown - Traxxas Slash vs Team Associated DR10
RC Drag League UK Facebook Group: / 1272072576623517
Gets cars and parts here:
Drag Slash: bit.ly/3jw0JIJ
Team Associated DR10: bit.ly/3jtBMh8
Turnigy Rapid 2s 140C Lipo: hobbyking.com/en_us/turnigy-r...
Hobbywing XR10 Pro: bit.ly/2XpDLLk
Hobbywing 3.5 Turn Motor: bit.ly/3nQ8axt
Hobbywing OTA: bit.ly/3lAg77j
Exotek Wheelie Bar: bit.ly/3CoCS4J
Exotek ESC Mount: bit.ly/3CotEFN
Exotek Idler Gear: bit.ly/3nIvrl3
Protoform C7 Body: bit.ly/3ChvZSW
Proline Reaction Tires: bit.ly/3knLaE8
GPS: www.banggood.com/custlink/Gv3...
🚀 MERCH: hardcorerc.creator-spring.com/
👀FACEBOOK: / hardcorerc-10910420087...
❤IF YOU WOULD LIKE TO SUPPORT THE CHANNEL: paypal.me/davidlee1345?locale...
Recommended items:
Excellent 25kg Servo: www.banggood.com/custlink/KGm...
GPS SKYRC GSM020 Performance Analyzer: www.banggood.com/custlink/Gv3...
Fans:
Rocket 30mm: www.banggood.com/custlink/m3K...
Rocket 35mm: uk.banggood.com/custlink/3DmE...
Transmitters:
Flysky NB4:
Transmitter: www.banggood.com/custlink/G33...
FlySky FGr4P Receiver: www.banggood.com/custlink/vGD...
Flysky FGr4S Receiver: www.banggood.com/custlink/vmv...
Flysky FGR4 Receiver: www.banggood.com/custlink/Dmv...
Flysky FS-CTM01 Temperature Sensor: www.banggood.com/custlink/GDG...
Flysky FS-CVT01 Voltage Sensor: www.banggood.com/custlink/D3D...
Low Cost excellent transmitters:
DumboRC X6 2.4G 6CH Transmitter: www.banggood.com/custlink/KvK...
Flysky GT3C: www.banggood.com/custlink/G3K...
FlySky FS-GT5: www.banggood.com/custlink/mGD...
Chargers:
Hota D6+: www.banggood.com/custlink/D33...
HTRC T240 DUO: www.banggood.com/custlink/33K...
HTRC DOU 400: www.banggood.com/custlink/33v...
#HardcoreRC #rccars #rc #arrma #arrmarc #ARRMAHOF
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission from the retailer. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Awesome Drag racing against mr talbot. Excellent run and crashes! Thanks for sharing
Have a great weekend and stay safe.
👍🥶👍
My favorite rc youtubers are gathered in one place. Thanks to you, I enjoyed watching it.👍👍👍
Thanks - always good to get the whole crowd out for a day of fun and laughter and RC's 👍👍
One of the best videos iv watched out of all the rc drag videos your overview of the car build is spot on
Thank you for watching and your kind words 👍👍
Another great video! You all make my day when you post a new video and on days you don't my day gets better by watching all your other videos haha
ahh thanks - glad you like our videos, makes the time filming and editing worth it 👍
Brilliant, what a crack up. Great start to the morning - thanks guys ⚡👍💯
Glad you enjoyed it and gave you a great start to your day - means a lot 👍
Love it guys. Buddy got me a dr10 for Christmas, and himself a drag slash and his cousin a losi. Keeps bragging that nothing will beat his slash. Little does he know, I've done my homework(thanks boys). Just did a test with slipper turned out, and this little kitty flies. You guys and your enthusiasm is getting me in trouble with the misses, but I'm like a kid in a candy store at the hobby shop these days. Appreciate all your efforts, and infectious smiles. Cheers from across the pond.
Hehe go eat that Slash for dinner 😂 nice of your buddy to buy you the cars and to also each have something different from each other, do need to get back out the whit drag cars, last year was really quite sadly. Sorry for getting you in trouble, but it is a very infectious hobby, thanks for your kind words and support 👍
@@HardcoreRC he is a good dude at heart, and was a true friend when dad died during lockdowns. That being said, he needs to always win, be faster, better, whatever, is insufferable. I don't mind losing, but I do mind someone giving me the wrong info on rc, then rubbing it in my face. I'm sure we will have a good chuckle about it, after the sting of his resounding defeat goes away. I named the car "Your Illusions", so he can watch them disappear as I dust him. Wrote it in bold italics across the boot face.
where can i get dat rear shock tower on the dr10 from?
Great Vid. Trust Kev to drive all over you with the UDR. Good luck with the quest. Will be here to see it.
Thanks - to be fair it wasnt Kevs fault, he stayed in lane, Jack just drove right in front of him both times 🤦♂️
The race against the UDR. Epic funny as hell. Sometimes a good laugh with family and friends is better then any medication out there
Yeah, it should have been an easy win, Jack clearly got the race start jitters 😂😂 made for good footage though😂
Great Video guys .
Think it's safe to say you won that🏆 .
Yeah i think so 😂😂
Trying to get into the drag stuff here in Aussie but got bugger all supply until after Xmas 😢 lots of sad kids this Xmas . Also love the car guys.and loved Kev razzing up the boys, “ this is u tube!”😜👍🏼🤛🏼🤜🏼
I know that feeling, we are having to import a lot from the USA, but even then the global supply issue doesn't help, Sad kids at Christmas is never good 😥 hope you start to get stock in soon. Kev does know how to jazz it up, he has been doing it so long its second nature to him now
@@HardcoreRC haha nice one . Would love to be there when all your crew get together for a good session. You lot have a blast. Your young fellas face pulls and expressions crack me up . Bet dad has a fun time keeping two teenagers in line. Can’t wait to see you take back your drag record. That build looks awesome as. Side note: I get stuff sent to me quicker from America and China to here in Australia than I get from my own country atm. ( when in stock) it’s crazy trying to source things . As soon as I find what I’m needing “ add to cart” before it’s gone or the dreaded “out of stock” just got some of those Raz perfect pass carbon and titanium driveshafts for the infraction and felony. From island hobby nut. They are awesome . And turned up in less than a week from the states. Takes me 4 days to get stuff 100 ks 70 miles always go figure. Also just got some bling for the kraton from scorched parts uk . They were really good to deal with. Sorry for going on. Can’t wait to see more footage soon. Cheers hardcore rc 👍🤜🤛😜
What a brilliant video guys totally awesome
Thanks - all just a bit of a laugh, always is when Kev is out 😂
Bumper cars? Done with UK style! Great video guys!
Thanks, glad you enjoyed 👍👍
Liked the colab kinda vid woth friendly competition. Welldone dr10
Thanks - we both needed to see how the Stock Slash went against a modded DR10, it was supposed to happen the week before but rain put a stop to that
Love this vid. I’d like to see drag with nitro or petrol engines too
Dont have any Nitro currently, plan on getting one soon though, got my eye on the Tekno NT 48 2.0
@@HardcoreRC I’ll check it out.
Awesome video that’s dialled in man drives really straight and true I want one now 😝
Thanks - pulling a bit at launch so need to sort that out - once going though its nice and straight - really think the DR10 is the cheapest platform to start from
Fantastic video guys as always guys
Glad you enjoyed it 👍👍
Perfect timing with the . It could have been ours 😆!!
hehe thanks 👍👍
2.6 is freeeeaaaaakin zooooomin wawh!!!
Really need to get down the below 2.4 and ideally to the 2.2 range - some guys in the USA i have heard are down at 1.8 😲😲😲
This is so funny to see 😂. Kev trying everything to go faster while you lot just dominate the dragrace
It was funny, he was like, no no no im going to beat you 😂 wasnt even our best day, we had a little crash before and broke our prior shock upright part, so now the geometry is a little out, need to tune it back up which sucks
@@HardcoreRC dragrace is something completely different compared to bashing. Probably kev wil put in a “dirt cheap “ 12s esc/motor combo. As he said:”! More s means more power and that means more speed”
😂😂
@@gregory9157 True, then it would fall into a different class, forgte what they call it, these are all 1/10th no prep cars so should only be run on 2s.
A lot depends on how serious you want to be or just have a laugh
What settings You Run in the Xr10 pro Esc can you Show that or is it a Secrit...🤣🤣
We are just playing with the boost and turbo at present, just turning it up but by bit to see how it then runs, what settings work for us may not work for you depending on what tires, surface and even the temperature is etc.
I actually need to turn it all back down as i fitted a new rear shock tower brace and that has messed up our balance sop its not running straight now, need to turn down, get running straight and then start building back up
What charge lead do you use for the battery
Battery comes with leads to plug in to the lipo (5mm bullets) then just use this to put the connector on that fits to your charger
Not to bad!!!✌️😁
Thanks
I can hear it slip when you go over the painted arrows. Can you find a lighter battery?
Yeah the painted lines really dont help, Battery helps to keep the front down, have a short pack, but friends that used shorties just had them puff up, these being 2p also help with the voltage sag, have some CNHL ones incoming as well
Need help please. I am just starting in the 2s No Prep scene. I purchased a traxxas drag slash recently but am trying to upgrade it. On 3s, the motor is amazing, 2s, it seems really slow compared to what I've seen. I bought a Spektrum Firma 100A Brushless Smart ESC / 6500Kv Sensorless Motor Combo: No-Prep, SPMXSEMC13 to replace the stock motor but I think I made a mistake and might return it. what is the best affordable motor (not more than $200) you would recommend?
To get into good times you really need to be getter a better ESC and Motor, need to be looking at HobbyWing XR10 pro and a 3.5 turn motor - that 100amp specktrum ESC will not be able to handle high the high RPM motors you need
@@HardcoreRC thats exactly what i was looking for. Thanks!
@@HardcoreRC you would think running on 2s batteries, you could win using less expensive esc's/motors. That the cars setup would make the difference in winning or not. Nope, just like everything else, money wins. At least I have a goal now. How to hide the cost of this from the wife LOL. thanks for pointing me in the right direction.
@@riftur7636 That's ok, yes sadly it can become very much pay to win
Sick drag 😎🤙
Thanks 👍👍
AWESOMENESS!!! 😎
Thanks!!
I have a sidewinder 4 7700kv motor and ESC. Will it work with the dr10 and how will it do in one?
Should work well, ESC may be a bit under powered, but deffo a good start
@@HardcoreRC What do you mean ESC might be underpowered? I'm kind of new to RCs. It's the ESC that came with the motor. Do you mean underpowered for the motor or car?
@@chrism1940 I mean underpowered for the application you are looking to use it in, if trying to pull fast times, the problem is that Castle dont publish what the amp rating is for this ESC
@@HardcoreRC I see. One more question I have. When replacing a motor or changing gears should you put the motor gear up against the next gear tight as possible or allow a little space?
@@chrism1940 Never make it tight, should always be a little space so the gears can move freely, its called mashing the gears, putting a piece of paper between the gears and pushing together can make it easier, i do suggest you search meshing rc gears on youtube as this will help you
Oh yes loving this, orsum video 👍🏻
Thanks, glad you enjoyed 👍
Haha awesome m8 oh yeah pritty sure the vendetta comes with metal gears but the brushed infraction comes plastic dude just seen Earl moorhead done an unboxing on one im happy again now haha
Thanks - sorry to upset you, not sure where in Earls video he said it was metal gears, if he did, 20+ mins was to much for me to watch it all, but it comes with plastic gears for sure, check the Arrma site, diffs have metal internals like all the 3s car, but the main and input gears and spur are all plastic
DR10 Try to get ur hands on Reaction Blue Dots or Axis 20% jus do a little simple green slow clean on a carpet then dry ur tires right after until you feel it tugging and bring ur power in earlier with the right gun like a Futaba 4pm you will be the fastest in the UK 🇬🇧 with ur set up you should be running in the 2/2.2’s🤙
Thanks for the tips, need to get this car back out, imported some simple green as well, would be nice to get down in to the low 2's
What gearing are you running in your Dr10 if you don't mind me asking?
With this set up current using the stock gearing, did buy pretty much every combo of pinion and spur, but don't actually needs them currently 😂
@@HardcoreRC thankyou mate. I've got mine just over a week ago so still testing and tuning so cheers for advice. Your videos have helped me quite a lot already.👍👍I just have to find some people near me that are doing it. All touring car NR me.so racing myself ATM. Still fun though.
@@adampsrcs3487 No problem and glad our videos have been helpful - hope you find others into drag racing as well
@@HardcoreRC 👍👍me to mate.south west Wiltshire is boring lol
Avoid that white paint with the launch looks and sounds like it spins over it 🤔 I maybe and probably am wrong 🤷♂️ great vid chaps get that title back 💪👊🏼💯
Yeah we keep trying to avoid it but so much of it 😂😂
You do know In Drag Racing popping out of lane is instant DQ right lol, anybody can run fast when the strip is as wide as it is long heehee , seriously ,was fun to watch, 🖖
We do yes, just all a bit of fun currenlty - waiting to get hold of a DTS-1 and start to do some proper racing and start a list
Well cool some of th3 racers in league would like to race onc3 they have tuned and tested
Need to dust our down and get it out again now the summer is pretty much here and would welcome some races
Take electric tape wrap the tires run it around alil bit the remove the tape then boom tires will be sticky for a short time
Good idea 👍, although tyre additive would probably be quicker and easier
I need a drag car in my life 👌
They are a lot of fun in a group and when racing etc
Trucked it
Just a little bit 😂😂
Lolz you should know better than to let Kevin near your RC Cars 😂😝
It was all Jacks fault, its funny watching people get the race start jitters, the only time Jack really went off course was when racing 😂😂
Awesome drag car #HardcorRC
Thanks - need to tune it more and get faster though - we dropping down the league
'SUP everybody' so awk lol
Wassup 👍👍👍
Love how you are telling the number 1 CZcams’s how to do it 😆 #clueless also #kevsucks 😝
I didnt know anything about no prep, and to be honest still have a lot to learn, but its sharing that information that helps people as learn and share 👍👍
The Corvette body looks sick Well did lol Kev is a drag racing noob How the hell did he hit that curb like that lol I'm kidding I love Kev he seems to be a good guy He just sucks at drag racing lol 😁 Gotta start some where I guess hehe ✌️
LOL, its actually quite easy to hit the curb, the speed these are doing doesn't really come off on the video, then they are super hard to stop without rolling over, as they only brake on the rear wheels, all good fun though
Could be worse could be mine
That is very true 😂
Salut my friend super car super video subscribe subscribe
Thank you Ungur glad you like and thank you for subscribing 👍👍
LOL, nice
Thanks 👍👍
😎🦾
Thanks for watching and glad you enjoyed 👍👍👍
Those cars suck! cant even drive um in a straight line LOL! Good vedio though.
Don't think its soo much they suck, more they need to be dialled in more, launching rear wheel drive only and going in straight line are part of the skill in set up etc, what makes drag racing hard. Glad you liked the video 👍
First
Awesome
Never, how did that happen 😂😂 well done