28 Segment Bargraph Add-On for gpstar's Haslab Kit Step-by-Step Installation Guide
Vložit
- čas přidán 22. 08. 2024
- Works exclusively with gpstar's Haslab Pack & Wand Kit
Visit our site to purchase!
www.gpstartechn... (OFFICIAL SITE)
United Kingdom: www.fruttotechn... (distributor)
Check out the Github for more info & operations manual:
github.com/gps...
Operations Guide:
github.com/gps...
gpstar Main Kits Installation VIdeo:
• OLD VERSION gpstar's H...
5-LED x4 Cyclotron Lid Replacement Add-On Installation Video:
• 5-LED Cyclotron Add-On...
15-LED Powercell Replacement Add-On Installation Video:
• 15-LED Powercell Add-O...
Join our Facebook Group for lively discussions and updates:
/ gpstartechnologies
gpstar's CZcams: @MichaelRajotte
Operation Guide: @DustinGrau
Video was a life saver thank you. I broke my 84 wand so I went with the non destructive mode on my afterlife wand but just got 2 84 wands today. It was a super easy mod and I did the destructive mode which is SO much better especially with Fruto vent light
Thank You, your list is right on!
Choose the form of the the destructor, huh?
Hi again, I was wondering if there are going to be video instructions for hat light installations
I’m working on coming out with a hat light kit. Once it’s ready to sell I will make a video
Hey I d like to reach out to you and ask if you would be able to make this mod for me with a spengler neutrinowand and sell me the hole thing - I tried myself but unfortunatly screwed up my wand
Oh no. What happened?
@@jonogunn I got as far as getting it working but did not manage to solder the Black Kabel to the GND Board- probably I destroyed the Board by overheating while trying-
Will this bar graph work on a stock wand?
not this one but frutto technology has a separate bargraph that is designed for the stock board. it has less features but still an upgrade from the stock bargraph.
I need this in my life. But it looks like a mission. 😅. I don’t get it tho. So your board does the different start up, adds the bar graph and also adds the high intensity vent light?
Yes and that’s only a very small part of the features our kit provides
@@jonogunn what im really looking for is the bright frutto vent light, the screen accurate power on sound from the 84/89 movies. And maybe the bar graph. I would love the 84-89 cyclotron lights that fade out was they’re rotating.
What is exactly needed to swap bar graph?? Please tell me all parts
this is for the gpstar kit so you would need to start with buying that kit first then you can buy this add-on. check desciption for info and link
That looks complicated!! So this tech is just a plug & play ??
the tech itself is yes. but to have it installed in the hasbro wand it requires modifications to the inner body. this is an add-on to the gpstar kit. please check out the main installation video of the gpstar kit first!
Do you have a video for the installation of the Frutto vent light?
No I don’t. I suppose I could make a video but it’s really pretty straight forward. Do you see how the existing vent light is screwed into the wand? If so it’s as easy as removing that and replacing it with frutto in the exact same manner
@@jonogunn the Frutto vent light has a terminal block and comes with 4 wires. The stock vent light has 3 wires.. so I'm just curious on the wiring more so than the installation.
fruttotechnology.com/ols/products/strobe-light-neutrona-wand-vent-ghosttrap-etc-dot
If you look at the photos it shows what goes where
@@jonogunn I have a question about the wiring. The brown wire for the rotary encoder is located in "ROT-" but, the photos show that the green wire for the vent light is using this same housing for GND, are they supposed to share "ROT-" or is one replacing the other?
@@tapmemis this for the frutto vent light? then yes it should be sharing one of the terminals.