EM Series: The why behind copper exhaust gasket direction of installation
Vložit
- čas přidán 10. 12. 2015
- Tips on installing copper crushed style exhaust gaskets.
Thank you for watching. Please subscribe and share my work!
Tool Links:
Pick set for removal: amzn.to/309rtGg
www.amazon.com/shop/shaneconl...
If I can ever be of service to you, here is a video explains how to connect with me.
• 2 Tips for getting fre...
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Shirt/Stickers link: how2wrench.com/product-catego...
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
/ shaneconleyhow2wrench
Instagram:
/ how2wrench
Linkedin:
/ shane-conley-how2wrench
Facebook:
/ mechanicslearningshari...
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free...
Amazon Tools:
www.amazon.com/shop/shaneconl...
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
Small Engine: • "How To": Small Engine...
Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt - Auta a dopravní prostředky
I looked into this since it was a 5 year old video and I didn't want to recall from memory. But as stated in this video, this bike actually was designed from Suzuki with both gaskets as shown in the parts fiche: www.partzilla.com/catalog/suzuki/motorcycle/2004/rm85l/muffler
:)
@@How2Wrench what grease should we use for the install of the cooper gaskets when the manual says apply a light coat of grease to the new copper gasket?
So it doesnt tell you on that bike to use abgrease,but what would be sufficient to use on copper gaskets as a lubricant?
Love this channel! Just did a full rebuild of my son's 2005 kx100 with confidence gained from watching this channel. Went smooth as butter and runs like a champ. I actually took the exhaust back off and switched this copper gasket around right after watching this video. Didn't even notice one side was flat. My factory service manual also shows nothing about it. Great knowledgeable videos! SHANE ROCKS!
Thanks. I made a mistake and got 2 pairs of gaskets. Good thing I did. Your video helped me.
Working on a GL1100 restoration and could not find this information in the factory repair manual. I actually hadn't noticed the lip until after I mocked up one side. So glad I hadn't torque the header down yet. Sure enough one was correct the other was not. Your explanation/logic behind the correct installation is spot on to me. Thank you! absolutely fantastic information.
You saved my arse with the direction of the copper gasket! Thank you!
That's awesome!!..Love watching your videos Shane!!
Thank you, I just installed my pipes and that was very helpful and the common sense behind it will cause me to remember!
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
thank you my friend. This is exactly what I was looking!
Again another great video that only you explained. I'm a transport and auto licensed tech in canada and these tips are new to me and good advice!
Glad it helped! You rock for commenting! We will let Shane know!
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks Sir! Now that's a proper explanation! I have Royal Enfield Classic 350cc bike and I was looking for Installing instructions for Copper Exhaust Gasket for bend pipe..
Glad it helped. We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Pro-tip for sure. Thanks, Shane. Your videos are really helpful.
Again ,awsome tips from master Shane.. good job master 👏👏👏
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Man you are a legend this is the only video I could find I didn't know what way to put the gasket but now I know
Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
You sir are an awsome teacher! I love your videos.
Wow, thank you! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Thank you!!!!!!! I also wondered why it has a seam on one side. Sadly in my nation (India) roadside mechanics and service centers do crappy jobs, so I fix all my vehicles myself. And when I asked for copper gasket they handed me a cork gasket, which I clearly knew wasn't supposed to be used as why would a company use an expensive copper gasket had cork gasket sufficed? I searched a lot and finally found OEM copper gasket and wondered which way it would go. Then I found your video! Thank you man! Attention to detail is very important in machines!
Hope this helped. Want to give us a “high five”? Click here www.paypal.me/how2wrench
Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
MY FRIEND,I DIDN'T UNDERSTOOD CAUSE MY ENGLISH IS NOT SO GOOD.THE FLAT SIDE OF COOPER WHERE I SHOULD PUT.ON CYLINDERS OUT OR ON EXCHAUST IN
Good sound reasoning, well explained. I wanted to make sure I put turbo to exhaust gasket right way round on td5 L/R Defender. Thanks.
Thank you! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for this video, it confirmed my theory as to the direction of installation.
Glad it helped! We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Excellent vid. I knew there must be a reason for the taper on the gaskets edge, and thus a correct orientation, but my manual mentions nothing. Glad I googled - this was exactly the answer I was looking for. Cheers from Australia 🤙🏽
Thanks for commenting and adding value to our community! Hello from across the pond!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for the tip man . A small one but definitely a useful one.
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Good info! I’m going to be installing my new exhaust system soon 😀
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks Shane! Always valuable info!!
You bet! Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
This was awesome and timely. Thank you
You rock for commenting!
Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
So important. Good info
Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: czcams.com/video/vjvmB01ebcs/video.html
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
czcams.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Thank you!
Huge save, have been looking for this, thank you!
Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Great video.
Very helpful, Thank you!
Glad it was helpful! We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Thanks man I have been wondering about this for awhile
Thanks Hebrew Hooligan!
Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I believe it is the opposite. I put the flat side out, here is why: the flat side matches the diameter of the pipe, the pipe pushes the gasket and the other side of the gasket will be pressed on the cylinder head surface and expands on it taking the shape of the gasket seat. It expands outwards though, when the same time the flat surface (which seems to cover also the internal diameter of the gasket) will prevent the gasket expand inwards as it seems harder material... Basically it's all about expanding outwards mostly. The bike sounds so sweet, if I am wrong I will let you know in a couple of months maybe...? I took a small risk as the bike does not have much life left with me, so I took the risk for you.
Like I say...it “really” doesn’t matter or the manual would specify BUT I feel pretty confident about my method and you’re only focused on your gasket with a flat side, many are rounded on both sides...
Keep Wrenching! Thank you. Here are some ways to support me and other ways to follow me. I’m also available for hire to personally work one on one with you:
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
I agree 100% you want the seamless side in contact with the steel pipe since it hammers on the surface from sonic pressure waves/spring action with the seam side is firmly planted against and jammed in the exhaust port. Because some bikes use high temp O-rings the function of the copper is also for protecting the cylinder exhaust port surface from chafe damage. Some o-ring sealed designs forgo the copper gasket due to a more solid support. At the end of the day it matters not as these are dirt bikes with associated low time between exhaust removal. I have been installing the copper gaskets this way since they invented H2 triples.
Exactly the information i was looking for
Thanks Jo! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Perfect video,, thank you...
Thank you. Here is a way to support all the free videos. Don’t forget to subscribe too!
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed.
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Excellent,' thanks - Mick
Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: czcams.com/video/vjvmB01ebcs/video.html
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
czcams.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Most Popular Playlist- Every Mechanic Should Know This:
czcams.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Thanks this helps me out a bit
Thank you!
Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432
Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench
Thank you in advance for giving back! He looks forward to working with you directly!
Have you hit that subscribe button yet? :)
Mine had 2 one way and 2 the other, could have been removed before but was all stock... Also my replacements did not have a flat side, just a round and round with seam side... Thanks for the info!!!
You rock for commenting!
Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks, good video. About to attempt this on my ‘01 KE100 oil injection street legal Enduro.
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
great video👍
Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped!
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Your videos are great, if I lived in the us I would look up the possibility of becoming a student.
+TNPerSwede
Right on, where are you from?
+shane conley Sweden, drive a Yamaha xt600 2kf 1987 which im doing small jobs on here and there and learning. Did a full restoration last year with teardown and buildup of my Yamaha Dt 125Lc mk1, so much fun.
Stumbled on your channel by chance and all the lovely info you share.
+TNPerSwede
Maybe Sweden should hire me to come create a school over there...👍
+shane conley you have my vote for that all day long.
Cool thanks
Got a yfz450 that has some little jagged pieces coming from around header, I'm guessing that's a blown gasket as described inured video thanx
Great vid, cheers.
Glad it helped! Thanks!
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
About to put the exhaust back on my atc 200s, has a copper smash gasket like that. Theory or not, i agree with way you would install it.
Oddly enough, i just did the top end on my 2006 RM85. Didn't have a smashable gasket like that inside. Just a flat, thin, (maybe cooper?) washer looking deal. It does however have a Bill's Pipes exhaust, the expansion chamber has one, wider, silicone gasket (that i ended up replacing with two stock one cause i couldn't find the right one)
Idk if it's all the correct parts, or even right, but it doesn't leak somehow lol
now I get why my slip on exhaust is burnt smoked.. I didn't find it that much important but now I kind of do.. for a pit bike SSR 125
Thank you for sharing…Below are some links that help support me and my work along with ways to connect to me for answers! Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
czcams.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Most Popular Playlist- Every Mechanic Should Know This:
czcams.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Well explained
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks!
Welcome! Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
I'm glad I saw this video it explains how my exhaust gasket ended up on the outside of the exhaust and looking blow up😂
Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily!. Smash the sub and like please. Glad it helped!
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks 🙏
You’re welcome 😊
Thanks for subbing!
High 5 us with a donation: www.paypal.me/how2wrench
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Hello Shane , I have a 1986 VFR 750 which has an exhaust lead at the manifold , could this cause a lake of power ? Thank you.
Excellent video , lot of guy putting after market motorcycle exhaust don’t put that
Glad it helped. We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Also if u place them in the freezer for a few hours the are easier to slip in and seat when they expand.
Makes sense. I have found most all to be a little loose vs. tight. Good tip if needed and welcome on here.
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Awesome, means I installed mine correctly lol. But honestly it just made more sense to me to put the flat side against the head.. As the header would flatten the seamed side..
Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money.
Join this channel to get access to perks: (Free tool giveaways and member-only videos)
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Give us a high 5 here: www.paypal.me/how2wrench
Surprisingly, mine didn't have any in/on it to start with despite the fact that they are shown on parts schematics. Additionally, the OEM gaskets I ordered don't seem to have a flat side (I'll have to check a bit more closely).
Air cooled gasoline powered aircraft engines use the type of gaskets in a lot of different applications and the sealed side goes to what get installed. So, not trying to contradict you but my experience tells me that the seam side would go to the head and the crush side to the pipe. Just installed a set on my 96 FXDL and will let you know if they leak.
35 miles, no sign of leaks. Held torque on everything.
My bike has a leak on both cylinders, and it looks like the pipe has been off before, so I have to wonder if the gaskets were not replaced or put in backwards. Either way I’ll replace them and keep this in mind!
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Good video. I have similar copper gaskets on my 2014 CB1100. I just finished installing a Moriwaki exhaust and it sounds like the exhaust is leaking at the header because it is making a lot of noise even though I have new gaskets in there. I had to wrangle with the pipes a bit to get them all connected and seated and am wondering if I didn’t get a good seal because of that. I bought extra gaskets in case this happened and will start over with a new set and hopefully have better luck.
Moriwaki exhaust!!!!! Heck ya...Shane has a video on testing exhaust for leaks. One of the member benefits is you can request and we will hunt it down for you or feel free to dig through our playlists!
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Got any tips on my 2stroke dt125. It wants to stall from standstill first gear when pulling away without choke. When choke is out it runs fine and i can keep choke on all speeds. Not getting enough fuel?
+TNPerSwede
Or you could have an air leak.
Thank u
Cool. We love tips! Links below. We also love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
do aftermarket pipes such as the FMF fatty also use the brass gasket thanks
It is not the pipe manufacturer that determines this, its the engine manufacture design. Many 2-stroke exhaust systems use an o-ring system.
Have you Subscribed yet to never miss a video? Have you seen the video playlists czcams.com/users/conleybuiltplaylists ? Quick answers are often found here. No time to look through videos?
Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My CZcams has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!)
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going!
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Admin How2Wrench.com
I have a 1977 kz650 I put a Delcevic header on and I got copper gaskets . I saw the seam but mine are round with no flat side. I looked and looked for weeks( delkevic said it didn't matter) so I just installed them. Now they don't seem to want to seal. I am afraid of over tightening them. They still leak very slightly. Any advice. Wish I had stumbled upon this site sooner. I subbed for future though. Thanks for your effort to bring us the info.
Have really good clean threads and tighten slowly back and forth across the exhaust. There is a tq spec in the manual and you should be able to create the proper "crush" of the gasket and hit the tq. Problem is that dirty threads of clamps dragging across rusty or even bent studs (usually from over tq in the past) can give you a "false torque" not really compressing the gasket. Get a good "eye" that everything is tightening down even across all the clamps too...
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Hello, I have a question copper vs cometic exhaust gaskets which one is best?
I know i may be 8 years late but thanks butt. Good to know. Im rebuilding a honda cm 200t and wanted some advice on thease gaskets.
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
So seem facing the exhaust or facing the engine? My gasket is rounded on both sides.
Hello, just put new header on my bike and bought new gaskets from Honda. The gaskets were round and one side had that little seam thing that u feel with ur finger nail. I put that part in facing the exhaust port. Is that bad?
Did you watch the video? I explain the reason...
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
bro just take a bottle of soap and water and spray your header port good. Then start the bike cold and look at the header. If you don't have a trail of air bubbles or a huge air bubbles you're good it sealed.
Yeah I have a 250 bayou and have put 3 of them copper gaskets on it and still sounds like it has an exhaust leak.
Do you have any idea what I need to do to fix the leak?
As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
hey i have a xr200 and i cant get my exaust hole to seal and idk y i have the gasket, bolt plate the little half circle things anyone here know if or what im missing
Mine didn't have a flat side.... It was completely round ring... It wouldn't matter anyways because, if you look at the old ones they're totally crushed flat from the factory, they're crush gaskets that flatten out when the MM torque spec is applied. So once you torque them down they crush out anyways and go flat. That's how they seal and make a good fit is by crushing down to make up for any small differences between the head and header pipe and provide positive contact between both. So which direction isn't going to matter if the thing looks like a pancake when you're done anyways...
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! czcams.com/video/oAeXz1nd-eQ/video.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
After adjusting the fork hight on a ninja 400 the exhaust was resting on a jack just enough to adjust the forks without all the front end weight on the jack, and after the adjustment riding for about 20 miles the bike began making a loud tick at 10,000rpm max hp, I thought it needed a valve adjustment but when I got home I tightened the exhaust header bolts to 2ft-lbs each and the tick stopped, so if the bolts on those copper gaskets arn't evenly tight with a torque wrench the slight leak sound is horrible,,,,and never rest the bike on the headers either.😮
Right on.
Sorry about the late comment here,but I knew you would have something on instructions for thengaskets,i can always count on you for details! Herea the only detail im after now,I'm replacing the headers and full exhaustion a 202 h2 sxse,in the manual,after saying to replace the copper gaskets,it states"use grease to install gaskets" Now,as you said,nothing about the direction of the gaskets,so will go with your recommendation,but EXACTLY WHAT kind of grease are they referring too? I have drawers of different types of grease,from vasoline to aero shell 64 synthetic,so what are they talking about for grease?? Thank you much for any input!!
Sorry for the typos. Hands are all greasy right now,no pun intended lol
The gease is just to aid holding it in place while you install the headpipe...no function on type is required...
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
thank you didn't know that
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Can copper gaskets be reused? Never had to work with them before...
Nope friend, one time use as they crush upon installation.
Thank you. Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
How did you get the old ones out?
I use these: amzn.to/309rtGg
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
My gaskets are thick, not copper, but with some wire wrapped all round them. I've no idea which way they go in
That surely is a question for Shane. Can you hit the subscribe button, it helps us and he often responds to subscribers when he gets to a computer. You rock!
For faster service see below:
We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner.
Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432
Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench
Thank you in advance for giving back! He looks forward to working with you directly!
I am confused. The "flat side" of my gasket shows a flange that would naturally create direction of flow issues if installed on the engine side. Otherwise it should expand like an O ring when compressed. I've dealt with a lot of laminar flow considerations during the coarse of my 60 year career. But I could be wrong as bike mechanic that knows what he is doing always takes the front seat.
Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Does a 1999 kx125 have this copper gasket?
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
My exhaust gasket doesnt seem to fit. Can anyone help. It's on a crf450r the gasket is out of a top end gasket kit that fits 02-06. I'm a 2003.
You can work directly with me to help you on my techline. Can even your phone to show the problem. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
@@How2Wrench thank you. I will subscribe. I ordered an OEM gasket do hopefully it's better sized. The two I have are definitely too big.
By “flat side” do you mean the smooth side/unseamed side? Your terms are confusing. Thanks!
Good question and I'm sure others would like clarity. Many of these gaskets are actually "flat". For clarity on every year, make, model, size, brand, design, or any other possibility lets roll with a seam or no seam...or folded edge or no to intersecting ends. Hope this helped.
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thats makes sense. Kind of logic.buy id bet you if that wouldve been in the manual it for sure be telling u to do The reversed ;p
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
I'm not against this the only thing I think about is how it's going to crush on the crack side to the muffler my thought was it wouldn't catch both ends and fold in half or only crush one side and it not have full gasket crushed once again just a thought
There is PLENTY of "real estate" is how I describe it. It will honestly work both ways as described but my demonstration shows being a mechanic with intention. Also next time you install take a look and think about what direction the pressure is going.
Thank you for sharing my work. If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
💪🏼
Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Dont like copper gaskets.I tend to remove my exhaust for cleaning.Its a one time use only.Can be expensive cleaning a motorcycle propley
Thats why i buy 3x at a time
But surely the diameter of the outlet of the engine is significantly smaller when you look in , the actual diameter of the gasket sits wider in the hole and once exhaust is in place the gasket won’t be in direct release of flow ! But then again I’m no mechanic and I’m sure your experience outways my thinking ❤️
That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 19th but is trying to schedule time each day to answer techline orders yet.
Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line.
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
I could NOT for the life of me get my OEM gaskets out my motorcycle. They are smashed in there against that dam head.
Considering the bike has only 1300 miles 2 months old, it's brand new basically, I left oem ones.
I couldn't even get them popped out with my dental pic I use to clean my guns from tiny gunk spots
A few tips...1. The crushed gasket is normal and designed to do so as its a one-time use and creates a good seal for temperature expansion. 2. If the gasket was "serverly" crushed, I would be concerned the exhuast studs may be stretched for over-tightening and need replaced to avoid breaking off while operating. 3. If they are hard to get out due to carbon build up and its so a low milage bike, then there may be fuel/engine/elelctrical problems...
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Hahah well I have a rebel 2ycl I suppose I installed one the way you say to an the other opposite cause one leaks
Opps....Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
you answered to ? I was embarrassed to ask thanks
Wrong I removed exhaust from a crf 230 never been apart the gasket seam was facing the engine from factory
From Shane: "As stated in the video, this was a theory based on thousands of bikes worked on, not one model that a new or inexperienced employee built on friday at 4:59 pm....😉 That's why they come with warranty.
In all seriousness, thank you for sharing what you found on a model. Appreciated...."
From us:
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
thanks! yea no repair manuals say that shit
It's not in the manual because 2strokes DONT use copper gaskets, it's only 4strokes. That's why in every 4stroke manual THERE IS info about the copper gasket.
Simple
Giva an example of where in the manual (which year make and model) it states what direction the gasket is inserted and we will have you a How2Wrench package! It would be great to update this 5 year old video and FYI....this bike DOES require both gaskets as seen from the parts fiche: www.partzilla.com/catalog/suzuki/motorcycle/2004/rm85l/muffler
Remember kids, seam-out, not seam-in. You don't want seam-in on your block.
Nice....love it....
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Load of old tripe.
Doesn't matter which way it goes.
What's "old" is your hearing or listening skills as he clearly states @3:07 is doesn't matter....🤣 I'm just in the office but have heard him say it plenty of times in the shop on attention to details...it's not for everyone.
Copper gaskets is on MOST 4strokes. AND COMPRESSES WHEN CLAMPING THE HEADER.
NOT FOR 2S
YOU CANT COMPRESS ON A 2STROKES!!!!
GADDAMIT.....
As you will see from many of these old videos, they were answering a question that came from students. The video is not focused on 2 stroke or 4 stroke but simply just the gasket. Your comments are always welcome if meant to help. Admin-H2W
@@How2Wrench ok just wanted it to be correct, especially if it's for students
@@Motoinc I looked into this since it was a 5 year old video and I didn't want to recall from memory. But as stated in this video, this bike actually was designed from Suzuki with both gaskets as shown in the parts fiche: www.partzilla.com/catalog/suzuki/motorcycle/2004/rm85l/muffler
Thank you!
Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one