Video není dostupné.
Omlouváme se.
Plastics Injection Molding: Step-By-Step at the Factory - Field Notes
Komentáře • 83
Další v pořadí
Automatické přehrávání
Plastic Injection Moldingengineerguy
zhlédnutí 4,4M
PLASTIC INJECTION MOLD SETUPDragonfly Engineering
zhlédnutí 63K
5 Tips to Avoid Expensive Plastic Injection Molding Mistakes | Serious Engineering: Ep30Star Rapid
zhlédnutí 48K
What is going on? 😂 (via haechii_br/IG) #shortsSportsNation
zhlédnutí 16M
Getting her riled up for no reason 🤣Hunna & Lib
zhlédnutí 35M
艾莎生气,王子粗暴化解尴尬#艾莎落魄的王子
zhlédnutí 27M
IKON A SÉGRA HRAJÍ KÁMEN NŮŽKY PAPÍR CHALLENGE O JÍDLO V BAZÉNĚ ! 😂🍕🍟 #shortsIkonova Videa
zhlédnutí 119K
SEA LECT Plastics Plant Tour With Tribe TV - Plastic Injection MoldingSea-Lect Plastics
zhlédnutí 35K
When A Gang Leader Confronted Muhammad AliBoxing After Dark
zhlédnutí 7M
Injection Molding a Spoon - Designing, making, usingJohnSL - Random Products
zhlédnutí 486K
Smart Plastic Factory in Automative Industry - Here is how Demark doDemark Holding Group
zhlédnutí 61K
What is Injection Molding and How Does it Work?Protolabs
zhlédnutí 130K
Injection Molding - Design Your Product for ManufacturingPredictable Designs
zhlédnutí 15K
6 Tips to install Plastic Injection Mould on Molding MachineDaisy Lee
zhlédnutí 149K
INJECTION MOULDING FACTORY TOUR || TG Engineering Plastics UKTG Engineering Plastics
zhlédnutí 10K
What Actually Causes Flash in Injection Molded Parts?RJG, Inc.
zhlédnutí 72K
FIZI DRINK VS. COCA COLA? Co je zdravější? #shorts #marcel #cocacola #fizistyleMARCEL
zhlédnutí 180K
Wait for the last one! 👀 🍽️Josh Horton
zhlédnutí 17M
Udělal jsem si HWACHAE (špatnej nápad)MaTTem
zhlédnutí 124K
How would you react?!😳ILYA BORZOV
zhlédnutí 25M
Proč první Deadpool nemĕl ústa? #deadpool #wolverine #shortsNerdFix
zhlédnutí 104K
JAK SE ŠKRTÍ?!! #alkan_ #fortniteAlkanhraje
zhlédnutí 132K
V MÉ HLAVĚ…Attack
zhlédnutí 548K
Survival Skills: Steam Distiller for Dirty Water in Extreme Conditions. #survival #campingSergio Outdoors
zhlédnutí 33M
Thank You For Being Very Specific! I’ve Been Looking For a Video Like Yours But Yours The Only One That I Have found and I’ve Been Doing Days ofresearch.
Did 4 years as a mold-setter (easily the most dangerous job I've ever done in 40 yrs+ of working) and a production supervisor in an injection molding factory. Will never step foot in one again. Extremely hot environment due to the barrel temps. on the machines, lots of potentially dangerous situations to navigate (molding department). If you're in finishing or quality, the work is meticulous & boring. I've also done time in those hot, dusty carpet mills in the South, plus about 10 yrs. in an automotive machine shop. Machine shops are hazardous also, but injection molding is the king of dangerous, hot factory work. This video is definitely sugar-coating the real experience. Guaranteed before they were going through the shop floor with cameras, all the workers had been forewarned days ahead of time and the factory had been scrubbed clean by orders of management. We used to do the same thing when Nissan, BMW, or GM was visiting our factory. It was all for show, in order to procure additional projects. Once they left the floor, it was business as usual. Nature of the business.
No job is perfect. I need the money.
Hi, I'm thinking about applying for a "foam molding machine operator" does what you say apply to that?
@@RedCdot I’ve been trying to get the job but no luck. They’re mostly looking for people with experience.
@@suspicious2delicious I'm going to apply for it, it's a job posting within the company I already work for just in a different department I don't really have any experience in that department but I'm interested, I'm going to try at least the worst thing they can say is no 😂
@@RedCdot good luck! Tell me in the future if you like it or not. I’m still going to try to apply for the job.
The sprue and runner assembly does not go in the garbage. It gets ground up and re-melted.
Exactly it gets ground up and put through a extruder which makes new pellets
Now look at those beautiful automatic processes on those injection molding machines...
Like the music man!
Ive been doing injection molding maintenance for 20+ years now in upstate South Carolina. Mainly tier 1 automotive.
Where are the other molders in the comments from?
Thank you
did you stay at the Baolilai International Hotel? looks like it
Love him or hate him you gotta rate Arthur's drip
You showed me what I expected to see.
It’s this laborious processing of parts that means China will always be the place for mass production over western worlds, all because is westerners don’t want to pay this labour cost
Americans are entitled
@@dac518 *people
I corrected it for you.
And they also don't develop/install so much automation in a factory plant.
We're still 20 years behind china on factories automation.
@@joelpichette not to mention they built the infrastructure to go with it. If your automated line goes down here, can you drive to a market and pick up a spare in just a few hours? Nope, you have to pay a ridiculous price and wait for it to be shipped from somewhere like Mitsumi
Employees of the month, they have turned machine on 10 years back and no one seen them since at their work place 😂😂😂😂😂😂
Could I include a few seconds of this footage in a video I am making on the differences between metal and plastic wargame miniatures? I would of course include full credit and a link to the original.
go for it
I'm working Fanuc, Sumitomo,Yushin,Yudo...
From Việt Nam 🇻🇳
See they are sophisticated but not safety. See the ultra sonic process no ear plug or muf used
What I never understood is why the workers themselves don't buy some basic safety equipment themselves. I don't understand it especially because Chinese culture traditionally values health, so you would think they would be proactive to protect their bodies. Like a lot of these people aren't even wearing safety glasses working around potentially sharp plastics.
@@DaveSmith-cp5kj no work labor laws, if something happens to one he'll be replaced in seconds and production would never stop. And also they are payed horribly. If it ain't food, they are probably not going to buy it. America was the same way decades ago but laws have been put in place for their well being and others.
@@eronic404 You don't need regulations to take care of yourself.
@@DaveSmith-cp5kj Guessing it's human nature, we rather speed on a highway to get somewhere faster other then being safe for ourselves and others. We rather eat things that harm our health for taste rather then just eat to fill our stomachs with proper nutrients. We like to take the easy and convente route of things, and if people think eye goggles are annoying and get in the way of working and had a choice to wear it, they wouldn't. Look at mask...
i hope this guy is doing good
thx alot man ♥♥♥
Nice video good narration
looks great. do customers pay for the mold?
Every possible cost factor, from R&D to design to manpower and finished product, will be calculated in the price of the product.
I am considering this job It looks fun!
The best injection machine ever made will not save a badly designed mold. but a skilled hands-on process engineer might. I Did this work for 42 years and I still have all of my fingers.
Actually, ita quite boring. Been doing it for 2 1/2 years now
@@SeraltheTrollSlayer is it easy I’m a 17 year old no experience starting Tuesday 8 hour shifts
@@throwedDummy I would say it's easy, some people seem to have problems, but as far as factory work goes its pretty simple. The one I work at isn't quite the same as the one in the video, but you learn techniques as you go, to find what works best for you. For me it seemed difficult for the first week or two, but after I got used to it, most jobs were really simple.
@@throwedDummy this comment was written 6 months ago just wondering you still working there how is it asking because I started the job 2 days ago and its not as easy as it looks
Thanks
0:49 VMC Right?
Hello, dear friend! It's nice to meet you. I am an engineering plastic producer who specializes in modification, color customization, OEM, and ODM collaboration. Our factory is located in China. How can I assist you?
injection molding
Fanuc, sumitomo
Super anything job vacancy.
Glad to see they are using Haitian presses and not Chen Hsong Shite
Haitians are great. I've been working on them for a decade. Easy to troubleshoot.
Excelent, do you know the price?
what kind of price you want to know??
The price of the camera being used to film?
Injection Molding Machine
workers of all ages ????
You didn't name the company
We provide same services! If you're still interested
Im injection molding operator.plz job me?
Handling robot coming down right beside the user interface of the machine. The security is like the "skilled" technicans. Lousy!
Thank you for your No offense but top 5 my ass. I can find a dozen of similar mould maker any day in that area. From what I can see from the video if that count as top 5 the Chinese industry future are doomed. Come to my factory I'll show you what a good one actually looks like.
Hiiii
anybody working in a pim
فاشدنس
4:08 I SAW THAT, PINGPING
iam molding machine Formen. factory Mgi. &. R.f.l. 18 YOURS WORK