Auto volt convert
Vložit
- čas přidán 20. 08. 2024
- Auto Volt Convert #220v ac to 3v-6v-9v-12v-24v-36v-48v-96v-110v-120v | AC To DC Led multi-output converter
Auto volt convert #220v ac to 3v,6v,9v,12v,24v,48v,96v,120v dc.
Hello friends, I have shown how to make a simple 220-volt to variable voltage output in this video. Please note that the circuit is not isolated from mains so don't touch any naked wire in this circuit when the circuit is plugged in with 220v AC.
Output voltage and courrent is depending on the output capacitor voltage. if you put 10uf 400v, you get 400v at 10mA. if you use 1000uf at 2500V, you get 1A 2500V. If you apply car battery at the output, you get 220Vac on the input; it is so powerful that you can run an hot glue factory with this. This circuit is a revolution of the atom theories🤣
Creative video, keep it up,thank you :)
I have already made it and it is working.. But if I kept the connection running for more than 30 second both resistors 220 ohm were high temperature although they were 2 watt power. Please explain
Does this circuit work for 110V? Thanks for your reply.
Yes
Qur voltaje y q corriente queda en ka salida y si por error se invierte quema los led
You only showed the series of two single 12v led, it’s mean 24v DC. How can I connect to ten pieces of 12v DC led (12v DC 30 watts)
Parallel
❤❤❤❤❤❤❤
which makes its auto voltage to change?
can it be used to charge the battery ?
@@dwisutadi no
What is the velu of reji n cap
Details given in video
Bro u have not sho 120v power light in testing time so how i will faith in this project. So please again show the video perfectly
Okay
10 यु एफ 450 होल्ट कां कॅपॅसीटर ले सकते है क्या सरजी प्लिज रिप्लाय देना
I don't believe this is safe nor functional . What voltage does a voltmeter read?
This is not safe. Do not touch any part of the circuit. I do not check the volts on the multimeter.
Bro I've already made this type of cercuit. Ac input current does not constant. When i check through multimeter it show approximately 230 upto 250v but dc output voltage has show 333v which is unbelievable. How is it possible?
I've use componets thats are :-
1. 225j 450v pf capacitor
2. 470k ohm 1/2 watt resistor
3. IN4007 Diode
4. 4.7uf 450v Electrode Capacitor
5. 07d511k mov
6. 86ohm 1watt fuseabel resistor
7. 470k ohm 1/2watt resistor
Back ground music is very bad
Okay dear
how many capacitor voltage?
Is capacitor voltage 400v used for its circuit ?
Yes I have used 400 volt capacitor but you can also use according to output or use 120 volt capacitor is better.
How many volts the limit output is?
220v dc
@@ECircuitsSuccesfully be yours. Keep healthy, keep happy, keep more creation❤
where is 3v output? 6v output? 9v output? 12v output? ...
I have run 4 volt, 9 volt and 12 volt LEDs with it. It is an auto driver so it will automatically step down the voltage depending on the LED voltage
@@ECircuits the resistor value is fxed , how the the cicruit step down the voltage automatically ?
RESISTANCE KA WATT NEHI BATAYA
2w sy 5w