+Ford spark plug thread repair kit+ TIME-SERT BLOWN OUT SPARK PLUG REPAIR blow out thread repair kit
Vložit
- čas přidán 9. 04. 2008
- www.timesert.com Ford spark plug thread repair kit P/N 5553 Please visit our site for questions.
Ford Triton Engine BLOWN SPARK PLUG repair,Ford spark plug shot out, spark plug thread repair,ford spark plug thread repair, ford spark plug threads repair, stripped threads,ford spark plug problem,stripped out threads,Spark plug shot out,Ford Triton Engine BLOWN SPARK PLUGS,timesert,time-sert, time-sert repair,Time-Sert thread repair system ,repair of stripped or damaged threads spark plug thread repair, head bolt thread repair, ford spark plug repair, threaded inserts for stripped threads,repair damaged threads, damaged threads repaired, spark plug ejection, sparkplug ejection, sparkplug blow out, spark plug blew out of head, spark plug repair, spark plug thread repair,Ford Triton Engine BLOWN out spark plug,Ford Triton Engine BLOWN SPARK PLUGS, spark plug blow out, time sert ,timecert,time sert, time sert,blown out spark plug, blown out spark plugs,blown out ford spark plug,ford spark plug blown out,stripped spark plug,stripped spark plug,ford spark plug problem triton engines triton spark plug popped out repair. ford spark plug came out popped out popping. without removing cylinder head - Auta a dopravní prostředky
this is the best video on this kind of spark plug thread repair!
Bought the kit direct from Timesert ... worked like a charm..I'm Handy with a wrench but not a mechanic .. None of the vids or instructions clear on the depth you tap so was nervous about that but used best judgement ...time will tell how it lasts...if I blow another I'm ready for it
keeglitt1 Run the tap until it gets to the bottom. The reamer tool should be run down until it stops to form the seat. Find out about the seat tool if you should run it down until it spins free.
Ótimo trabalho.
Started my car, drove for about three miles with my mustang real low on power and sounding like a Harley Davidson. Popped the hood while it was running and I could see light coming from under the COP in cylinder 3. No tools around so I can't remove it right now, but I got my fingers crossed that my threads aren't stripped.
Just happened on my E-150 2008 van.
Does timesert carry a fix for broken brake bleeder screws?
just buy the heli-coil tool.....if it comes out the next time you replace the plugs....insert new insert and install new plug.
JustGoogleIt When THAT happens, the hole will be enlarged and require a BIG-SERT!
Why not just fix it correctly the first time? Spend a little more money now to save more money in the future.
no but make sure u crank the motor with plug out 2 remove the chip's
any reason way these sparkplug are blowing out.. i heard it can be the oil im using 5w20 castrol high mileage (it over 150,000m) on my 2002'f250-5.4.. the driver.side 2ed plug blew an made a clicking sound an the coil ripp... FORD
hmmm stripped a spark plug today. should probly fix it that way. whats the kit worth in cnd$
Is this kit p/n 5553? This is different than your other video.?v=Ntiy8L97Nco. What type of head was in that one, it looked similar.
I ordered 5553 today, comes in 48 hours so I have my weekend project.
These videos are going to be very helpful. Thanks for the cutaway views.
Timesert should fix the website so people can order correctly.
@supermotofreak14 easier to get from ebay then to find it in Canada. Wurth is the distributor in Canada but good luck finding a way to buy from them. Timesert site says Fastenal has them but that is not true in western Canada. great products, wish I could get them more reliably :)
99 F250 4X4 5.4 360,000 km just lost the front driver side plug. Two weeks before I heard what sounded like an exhaust leak. If you hear this, it is the sound of a loose plug. CKECK YOUR PLUGS......or you will be here.
do you think JB weld work better than locktite?
The job pays 2 hours in our shop, I can do this on the motor in 45 minutes.
Yes friends 2 flag hours in .75 and it's the cheapest fix in the city.
having problem get spark plug out
Try a lot of WD-40 in the spark plug hole and work it back and forth to loosen it. Let the WD-40 soak for a day. EBAY has a tool to remove the plugs.
My 6.8L V10 in my '98 Ford E-Super Duty (E450) hasn't had an issues yet but I am thinking buying this kit and bringing it with me on my upcoming road trips wouldn't be a bad idea. Or would it be worth doing for all 10 cylinders before the issue arises?
JeepCollector91 It's a good kit to have! Bring along a new spark plug also. Check if your engine is easy to install these on all cylinders. Maybe have a mechanic to replace all of them. If they pop out, install a Big-sert. Check insert reach depth for your plugs. Use wheel bearing grease to catch shavings. Use an EZ out to remove inserts and helicoils.
JeepCollector91 / If it ain't broke, don't fix it....
THC causes paranoia
On long trips, yep. Fixing an AWOL plug is actually quite easy & simple on the side of the road. Don't forget spare plug & coil.
That's why 80-90k miles I trade up! Let someone else deal with this LOL!!
my ford is outa here! good bye Henrys revenge