5 year old vid and still the haters that don't grasp the concept of a brand new engine untuned rich as hell to be safe while running the motor in on it's first ever run and throttle EPA's only set to 60%, and it weighs 20kg. Plus at this time was only one of 3 Saxtoft MTC billet twins in existence in the world as i got one as a tester, before OBR twins were released either, so no i wasn't hurting on it at all in this vid, purely a video log of a very long term project's initial gentle run. Have a look at my other old vids to see it getting a proper flogging once it was run in if your vagina's are getting sandy watching this one of it putting around, lol.
Simon from Olimat Engineering in Adelaide made the pipes, he sent them in un- assembled kit form so i could tack weld them together then he did all the final welding and mounting brackets, outlets etc. They sound so awesome and his pipe i run on my regular baja makes great broad power and has a great ex note - nice and deep!
To everyone saying this is too slow, it's a first run the engines need to be broken in. those motors are capable of MUCH higher RPM after some gas is put through them.
I'm sorry, but why all the hate about this? Just because you have xxxx doesn't mean you need to pick apart and lay shit on what someone else has. What a bunch of school boys.
Hey mate nah this is a BodySax/MTC billet bottom end running stock un-ported 34mm Zenoah marine cylinders with Darksoul heatsinks. It's got 19/55 gears with taller profile 5T paddles to give it some more legs, hoping to get it out again soon to finish running in the motor and then leaning it off to let it rev and play with the tune to get full power from it.
I love this machine!! I've got a hpi baja sc that's piped but I'm picking up a used baja that needs quite a bit of tlc and I might just do a twin setup lol
@sk8boardin4life and yeah man used to enter in Motorvation for quite awhile but missed the last 3 since having our kid, plan to get back in the future though!
It was SO, SO nice to see someone actually warm there 2 stroke up perfectly! Idleing for a minute or so ... then a few blipps (while wheels are off the ground) to turn over the drivetrain and get a little heat into it, and then light to medium throttle till it hits operating temp! This puppy is running super rich ... id dare say this engine may be new by the way its been treated in this video ... This thing will be an animal once its broke in and leaned out!
i know Im randomly asking but does someone know a trick to get back into an Instagram account? I was stupid lost my account password. I would appreciate any help you can give me
@Huxley Alec i really appreciate your reply. I got to the site thru google and im trying it out now. Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
No second engine dude, its an inline just like an inline 4 cylinder found an any Toyota or Honda, both pistons are on the same crankshaft so when he pulls the starter they both fire up, This isn't Nitro where an MGT or any other monster truck has 2 nitros in it where you have to start them separately!!
This is awesome mate, I'm kinda new into rc hobbies and I got a on road drift car electric, this makes me want to come to off road nitro or petrol whatever, love the motorvation short too lol. Only a Perth guy will pick that up lol. Is this in lancelin
Nice build no hate but have you tried different pipes at all sounds like there holding you back I could be wrong plus it could be your audio can never tell unless I'm there watching
DUDE GET THEM PIPES CHROMED AND ILL GIVE IT 10 OUT OF 10 DEFO !!!!! ALSO IF YOU GET FEDUP WITH THE ORANGE AND WANT IT ALL SILVER JUST DEIRONIZE THEM IN SOME CAUSTIC SODA FOR TWO MINS AND RINCE WITH HOT WATER THEN ;LOTS OF COLD AND PUT EM ALL BACK ON. TOTAL RESPECT MATE NICEEEEEEE!!!!!
Hey mate sweet buggy, you say you eat clutches,you should try the pro MX 70MM clutch system...... you will find it on ddm, also you should join a group on facebook called Aussie Baja Bashers.
It eats clutches like a bastard, about every 2 nd tank, as yep 20kg doesn't help, about to try the FS steel. 2 shoe clutch next as meant to be ok in the twins.....
that thing is badass. it sounds killer and looks slick. nice build. i would love to see more
5 year old vid and still the haters that don't grasp the concept of a brand new engine untuned rich as hell to be safe while running the motor in on it's first ever run and throttle EPA's only set to 60%, and it weighs 20kg. Plus at this time was only one of 3 Saxtoft MTC billet twins in existence in the world as i got one as a tester, before OBR twins were released either, so no i wasn't hurting on it at all in this vid, purely a video log of a very long term project's initial gentle run. Have a look at my other old vids to see it getting a proper flogging once it was run in if your vagina's are getting sandy watching this one of it putting around, lol.
klhmx10 shhh
klhmx10 - do you have a list of everything you used on this beast, she's beautiful!
Simon from Olimat Engineering in Adelaide made the pipes, he sent them in un- assembled kit form so i could tack weld them together then he did all the final welding and mounting brackets, outlets etc. They sound so awesome and his pipe i run on my regular baja makes great broad power and has a great ex note - nice and deep!
To everyone saying this is too slow, it's a first run the engines need to be broken in. those motors are capable of MUCH higher RPM after some gas is put through them.
this is an amazing machine! !!!Soooo jealous! !!!Great video. .
I love how it sticks to the ground .... love it!
I'm sorry, but why all the hate about this? Just because you have xxxx doesn't mean you need to pick apart and lay shit on what someone else has. What a bunch of school boys.
Hey mate nah this is a BodySax/MTC billet bottom end running stock un-ported 34mm Zenoah marine cylinders with Darksoul heatsinks. It's got 19/55 gears with taller profile 5T paddles to give it some more legs, hoping to get it out again soon to finish running in the motor and then leaning it off to let it rev and play with the tune to get full power from it.
Sounds bad ass. Nice fab work on the exhaust.
Looks too nice to bash. Cool build.
What a fantastic video.
Beautiful hpi
Great Job,
your HPI Baja looks very nice in the beatiful landsape. Surreal..
Music to my ears
You can buy these from MTC marine in Germany, TGN had them but don't stock them now. Pretty sure DDM have them in stock too, Search MTC/Bodysax twin.
you can get a digital stub antenna and ive run mine without a tube and it is just taped to the rollcage for ages and ive never had a problem.
nice job, sounds like a rub in the bearing
Thats the most baddass Baja I've ever seen.
That is some awesome stuff. I really need to get my Baja going again.
Did you?
Mate well done, you must be pritty happy with that run.
@ddashk it does mate, side bleed pipes.
Wow just wow real nice stuff brap brother
that thing is badass
I love this machine!! I've got a hpi baja sc that's piped but I'm picking up a used baja that needs quite a bit of tlc and I might just do a twin setup lol
@sk8boardin4life and yeah man used to enter in Motorvation for quite awhile but missed the last 3 since having our kid, plan to get back in the future though!
Looks amazing!
Holy Crap, thing sounds like a mini banshee.
ALL the thumbs down are just insecure jelous people. Its a cool video, grow up
perfect and cool 👍👍👍
that's bloody awesome!!!
Incredible
Pretty bad ass rig u have ! I'm in envy!
When are you putting another video on of this awesome machine? Up the baja's.
that thing sounds amazing
like a soda can
is the crank case build for pum ?!!
damn i need this cc for my boat whis it whas afailable in holland mate
thanx for the video
so how does the clutch hold up to the twin and all of that aluminum on there? does it eat clutches or not?
Dude awesome
sweet car..
how fast would it go of you had somewhere you could go full throttle? ??
@Mohammed Ashraf hi mate sorry no, ive invested alot of money in it, but way more time.
It was SO, SO nice to see someone actually warm there 2 stroke up perfectly! Idleing for a minute or so ... then a few blipps (while wheels are off the ground) to turn over the drivetrain and get a little heat into it, and then light to medium throttle till it hits operating temp! This puppy is running super rich ... id dare say this engine may be new by the way its been treated in this video ... This thing will be an animal once its broke in and leaned out!
your delusional if you think thats the proper way to warm it up
Sounds like a mini banshee
this is awesome!
i know Im randomly asking but does someone know a trick to get back into an Instagram account?
I was stupid lost my account password. I would appreciate any help you can give me
@Atticus Koa instablaster =)
@Huxley Alec i really appreciate your reply. I got to the site thru google and im trying it out now.
Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
@Huxley Alec it did the trick and I actually got access to my account again. I am so happy:D
Thanks so much you saved my ass!
@Atticus Koa no problem :D
That is one sexy buggy . Awsome
Do you have the plans or how you made the cage to fit im wanting to make a twin 5b too
Man that is big. I am building my first Baja. I just hope I get it right
Swweeeet !! Love it, RC fun. :-)
How do u get the clutch to engage straight away ?
wouldnt it be better if exhaust outlets was turned upwards instead of down?
Me 2 but then oil and whatnot would clog the exhaust up
that is some beast what engine are you useing in there awsome vid btw :)
almost sounds like a banshee with toomeys
Cool build!
Go pro!!!
Luis Tarango yes! that would be neat
No second engine dude, its an inline just like an inline 4 cylinder found an any Toyota or Honda, both pistons are on the same crankshaft so when he pulls the starter they both fire up, This isn't Nitro where an MGT or any other monster truck has 2 nitros in it where you have to start them separately!!
is that Australia or yous up in the mountains
Donde venden esos motores ?
This is awesome mate, I'm kinda new into rc hobbies and I got a on road drift car electric, this makes me want to come to off road nitro or petrol whatever, love the motorvation short too lol. Only a Perth guy will pick that up lol. Is this in lancelin
what is the other buggy the one with the unpainted shell?
How's that duel exhaust working for you, it sounds great.
Nice build no hate but have you tried different pipes at all sounds like there holding you back I could be wrong plus it could be your audio can never tell unless I'm there watching
Realey a nice build 💪
does te stinger exit from to middle of the expansion chamber?
Sounds like it runs good! Looks like a heavy beast to me XD Whats the weight?
it was a smart as comment. referring to it is slow as a mo fo. just like my boat in sand.
it so good. i'm form Viet Nam i never see this Baja 5t, i like Nitro car but it so expensive
Looks tuff!! But super slow what's up with that?
hey mate im looking into doing the same conversion. how is the g-box holding up..have u got a alloy case for it? ill be running it on fraser island.
DUDE GET THEM PIPES CHROMED AND ILL GIVE IT 10 OUT OF 10 DEFO !!!!! ALSO IF YOU GET FEDUP WITH THE ORANGE AND WANT IT ALL SILVER JUST DEIRONIZE THEM IN SOME CAUSTIC SODA FOR TWO MINS AND RINCE WITH HOT WATER THEN ;LOTS OF COLD AND PUT EM ALL BACK ON. TOTAL RESPECT MATE NICEEEEEEE!!!!!
Nice car and vid
sounds fucking mean, love it man...!!!!!!!!!!
my mistake, studied all of the mods and it looks more like 9 or 10k.
Hey mate sweet buggy, you say you eat clutches,you should try the pro MX 70MM clutch system...... you will find it on ddm, also you should join a group on facebook called Aussie Baja Bashers.
Is this in Lancelin by any chance???
Sounds like a banshee
what brakes are you running on that?
sooo.. any reason you are just letting the engine get to TWICE the maximum safe operating temperature?
good driving bro
Where u get all the aluminum
i can with ease say you've got everything in billet?
It eats clutches like a bastard, about every 2 nd tank, as yep 20kg doesn't help, about to try the FS steel. 2 shoe clutch next as meant to be ok in the twins.....
Nah mate i was hitting the brakes.
stay of the dunes!!!
Did he fired up the sec engine?
woow.. keren abiss
VERY NICE TOY BUD ,SWEEET AS ;0)~
Bad ass!
Is the throttle just an on/off thing. That annoys the hell out of me you can just use a steady throttle
No its linear, not on and off.
Why is that twin such a slug ? Is there something wrong with it lol
That's the nicest one i've seen sofar. For "competitive " purposes it's not really suited though :D
But a very awesome project
Dear, do you wan to sell it????
Do they have a website?
Badass
holy shitballs lots of aluminum
czcams.com/video/IOEgtsnu9TE/video.html
Once tuned...... ;-)
klhmx10 how much was this set up?
That's a nice toy!
Nice how much?
nice
He needs to re jet it she wants more
Jesus! Who ever built those pipes should never touch a welder again.
Rory McMann Lol that was the first thing I noticed. Pretty ugly
Pipe is bad ass
wear do i by a motor like that for my baja i spent 4800 on mine but that is cool pl let me now cheers baja10