Indeed very easy to place inside a MGB Lucas 45D distributor, if you buy the set with two variants: one ring and the ring + rotor combined. For the newer one of my distributors, I bought the set with only the ring and it did not fit, while the combination package I bought afterwards did. So I now keep the fixed part of my first set as spare, because if an Accuspark unit ever fails I expect this not to happen in the rotating part, but in the fixed part with its electronics inside.
The scale represents the scale that will be on your engine , the needle is the mark on the crankshaft . we charge around £15.00- £25 for fitting . but 1 Hour would be the maximum labour you should pay .
apologies if the question sounds stupid - but how do i check the timing with the distributor still in the car? guy in the video looked at the meter on that machine??? How much does fitting cost? i might decide to have it fitted as i don't want to mess up the timing...
check if you have spark form the primary wire ( the one that comes from the coil) and if you got spark, fuel and compression it should start, if still doesn't have a buddy to crank the engine while you turn your distributor a little bit, every time you crank it, live it cool down for 10 minutes a least and crank it again until it starts, take care of ur starter motor, good luck, feel free and ask me about any doubt...
3 years fitted to my 1967 4 cylinder Rover P6. The inside of the cap still looks new and the car hasn't missed a beat. Brilliant product!!
I bought one of these from you.
A great investment.
My VW Beetle has never run better.
Indeed very easy to place inside a MGB Lucas 45D distributor, if you buy the set with two variants: one ring and the ring + rotor combined. For the newer one of my distributors, I bought the set with only the ring and it did not fit, while the combination package I bought afterwards did. So I now keep the fixed part of my first set as spare, because if an Accuspark unit ever fails I expect this not to happen in the rotating part, but in the fixed part with its electronics inside.
The scale represents the scale that will be on your engine , the needle is the mark on the crankshaft .
we charge around £15.00- £25 for fitting . but 1 Hour would be the maximum labour you should pay .
Amazingly simple to fit
Very nice, can you tell me if is good for my Citroen GS 4 cyl boxer, ducellier headcable
Is it appropriate to salute 1975 Opel Kadett C 1.2 engine
apologies if the question sounds stupid - but how do i check the timing with the distributor still in the car? guy in the video looked at the meter on that machine???
How much does fitting cost? i might decide to have it fitted as i don't want to mess up the timing...
Does it fit for all distributors?? Or should i buy one according to my car modal??
You should contact Accuspark or your dealer if you have a problem
Is there a system for a 1.6 Mk1 Caddy? Bosch.
Hi , sorry we don't have a suitable kit for fiat 4 cyl
check if you have spark form the primary wire ( the one that comes from the coil) and if you got spark, fuel and compression it should start, if still doesn't have a buddy to crank the engine while you turn your distributor a little bit, every time you crank it, live it cool down for 10 minutes a least and crank it again until it starts, take care of ur starter motor, good luck, feel free and ask me about any doubt...
distributor is £25.00 from our website accuspark.co.uk
u didnt connect the ground wire to one of the screws
Hi..Im restoring my vw 1303 and interested in the electric conversion kit.How much do they cost and will it be possible to ship to Nairobi.
I think you will find it was connected 3 mins in
Hello you need to purchase the correct kit for your car , see our website , accuspark.co.uk