MODIFIKASI BC Racing coilover install || Lowered Mazda CX 5 2012 - 2016

Sdílet
Vložit
  • čas přidán 20. 08. 2024
  • Car Vlog : Working on Suspension upgrade on Mazda CX 5 2013. KEEFW
    Parts : BC Racing V1 Coilover
    Beware this video is not a full step by step guide of the installation process. I had my mechanic to do this . Please seek your professional workshop if you aren't competent to do this .
    For more update on this car vlog please hit the Like button , Share and most importantly Subscribe to my channel to give your support . And it helps me to create more videos for all of us. Big thank you and Peace.
    Please follow my IG at felixdan_ and Subscribe to this channel to give your full support and lastly If you are interested on some Automotive parts visit my FB page GarasiAuto .
    INDONESIA ONLY: PLEASE VISIT MY ONLINE STORE FOR PERFORMANCE PARTS
    www.tokopedia....
    Thank you again viewers for the supports. See you again Peace.

Komentáře • 76

  • @eterna55
    @eterna55 Před 3 lety +1

    Salam kenal bro Felix, saya sesama pengguna cx5 juga di Medan

  • @heryoneheryone3664
    @heryoneheryone3664 Před 4 lety

    Sepintas membayangkan bantingan menjadi lebih rigid dan keras, kurang nyaman kalau buat bawa keluarga namun enak dibawa ngebut dg handling yg lebih rigid

  • @rceesuspension9551
    @rceesuspension9551 Před 3 lety +1

    I want to do this but I don't want to compromise the smooth ride. How bad is it??
    I really hate how tall the car is stock!!🤨

  • @richardfrost1026
    @richardfrost1026 Před rokem +1

    Hi can u tellme how much these wasi have a mazda CX-5 2013 and I can't get coilovers in the UK for my car

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před rokem

      i think u can get these off ebay , they sells for USD1000 mark.

    • @richardfrost1026
      @richardfrost1026 Před rokem

      Hi make do u have a part number could u have a look for me please many thanks been looking can't see anything

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před rokem

      @@richardfrost1026 hi please check their website bcracing.com.au/products/bc-racing-coilover-kit-v1-vm-mazda-cx-5-ke2fw-ke2aw-keefw-12-16

  • @bethc4924
    @bethc4924 Před 5 lety +2

    I'm thinking about dropping my 14 2 inches. Just using megan racing lowering springs. Besides alignment, anything else I should tweak?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 5 lety

      2 inch sounds good . If you like can option for rear camber kits to correct the camber other than that normal alignment should be enough for daily and it wont hurt the tyres as you only go for 2 inch drop. :)

  • @djhrjeiwhri
    @djhrjeiwhri Před měsícem +1

    Om felox, seller selalu menanyakan lubang besar atau kecil untuk shock cx-5 2013 2000cc ini. Yang benar yang besar atau kecil ya lubangnya?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před měsícem

      kalo yg 2000cc 2013 shock belakang nya lobang kecil.

    • @djhrjeiwhri
      @djhrjeiwhri Před 26 dny

      @@FelixDanGarasiAuto Terima kasih atas informasinya

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 26 dny

      @@djhrjeiwhri sm sm

    • @djhrjeiwhri
      @djhrjeiwhri Před 26 dny

      @@FelixDanGarasiAuto sama mau tanya, BUSHING BESAR LOWER ARM cx5 gen KE ini apa bisa diganti dengan yg gen KF ya?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 26 dny

      @@djhrjeiwhri harusnya sama aja ya soalnya tdk ad perubahan di part.

  • @ProAlchemist
    @ProAlchemist Před 3 lety +1

    These coilovers have the adjustable ride height, correct? Did you install them set as tall as they could be, as short as they could be, or somewhere in the middle?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 3 lety +1

      Yes the coils have the adjustable damper and ride heights. I had it installed on middle height setting. But once i had them low. I didnt like it as our roads are very bad had pot holes here n there everywhere.

  • @reymagallano512
    @reymagallano512 Před rokem

    What is the measurement of the shock, and coil spring for both the front and rear? Or do you have the parts number? Thank you

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před rokem

      wont be able to tell as ive sold the coilovers unit. Have you check bc racing website they have the in depth details about these coilover kit.

  • @junyanphiong5438
    @junyanphiong5438 Před 2 lety

    hi. 3 years later.. is this bc racing still in good condition doing its job?😂

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 2 lety

      unfortunately ive revert back to stock as someone bought the coilover off me. :) yes it has no problem when i sold it couple years back.

  • @davidgamel1811
    @davidgamel1811 Před 3 lety

    Is there a special way to get the bottom of the shock absorber off? I have removed the bottom nut from the shock. The shock will not give. This car has been fighting be left and right. Any suggestions would be awesome 😎 you make it look simple in the video. Mine isn’t going as smoothly. I have a 2014 cx-5. Thanks 🙏🏾

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 3 lety

      You have to jack up the car both side so theres no tension againts the shock.

    • @davidgamel1811
      @davidgamel1811 Před 3 lety

      I have it jacked up. I removed the spring and the two bolts at the top of the strut. The strut was destroyed. The mouth slip in half into two pieces when I removed the bolts

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 3 lety

      @@davidgamel1811 oh damnn that sux.

    • @davidgamel1811
      @davidgamel1811 Před 3 lety

      No doubt 😐

  • @richardfrost1026
    @richardfrost1026 Před rokem

    Hi can u help me where did u get your kit from for you Mazda xc5

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před rokem

      i got mine locally. but you can get urs from www.ebay.com/itm/224985089297?fits=Model%3ACX-5%7CMake%3AMazda&hash=item3462280511:g:fAIAAOSwmT1Ze2FN&amdata=enc%3AAQAHAAAA8OHqBsrJpWmi6%2FrnJ3zugQ7YHPaQQmOO2xZ53ddeKWtvcUohW2zKusy0RepUMpYfWaWg5JtV26Kx1%2F99bI1k7vbx5N9rz19cMuD1syc%2B1imBRUw5vI6biyI%2FjJssqtFgvbZcy7ySQRuQ7wu%2BLN%2Fu5edY1uV7Nv%2FdRqlg72PT4DsXuWsynkmpZD587DRbS6zu%2F27pmM8fIyU8qYh2Tj3aZPdnSC1%2FdzZGYsnLImvVZqwKS9bwMHvZWCC4CF%2FGtG9KRORCn1Yhe%2F14pFnLh5m6lw81ce1xxGgSmjXCRJe9NxunTQR%2B0qR0EQ03WPrcreWjXA%3D%3D%7Ctkp%3ABFBMnqSjyu1g

  • @alvinlee5642
    @alvinlee5642 Před 6 lety +1

    Halo bro felix. Udah brp lama nempel coilovernya? Masih ok sampe skrg? Gw ada bbrp pertanyaan nih.
    1.Ride-nya gimana? Kalo std kan pitchingnya kerasa banget di jalan jelek tuh.
    2. Damping shockbreakernya BC bagus ga?
    3. Di muat 3org di blkg ok?
    Thank you bro

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety +1

      Halo Bro Alvin. Salam kenal. Ini sudah bulan ke 4 saya pake Coilovernya. Coilovernya masih bagus dan holding strong . Ridenya saya setting untuk comfort saja dampening (10 click) depan , (8 click) belakang. Tidak terlalu keras dan tidak terlalu bouncy . Yang kemaren sempet ngerasa kyk basket ball yang duduk di belakang skarang malah tidak ada complain lagi semua nya di arbsorb dengan coilovernya ini . Dampening nya untuk versi ini sudah cukup bagus untuk jalanan di Indonesia , Saya jg setting coilovernya cuman 3 jari all round tidak on the lowest setting jadi masih ada suspension travelnya. Jujur kalo muat 3 orang di belakang untuk settingan height saya masih bisa dibilang oke feelingnya mirip standard. Hope this helps .

    • @alvinlee5642
      @alvinlee5642 Před 6 lety

      thx for replying bro. btw, kalo settingan paling tingginya bisa brp jari ya bro? kira2 aja....and thx again

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety

      kalo paling tinggi sekitar 4 jari .

  • @safuanabdulrahman7297
    @safuanabdulrahman7297 Před 4 lety +1

    comfort tak bang ? corner pn ok jugk? planning nak pasang utk golf mk5.

  • @johnmartinez7975
    @johnmartinez7975 Před 6 lety

    Hi i just want to know if you hava rust issue in the body of your cx5 specially in roof.

  • @tomnguyen1802
    @tomnguyen1802 Před 6 lety +1

    would love to purchase some coilovers and install them myself but they cost to much, so I'll purchase springs instead, but thanks for the upload of this video, the rear didn't seem to hard and the front, wished you would showed more but you sorta cut some of the video off, but thanks again though. Did you ever get camber kits? and how back is the camber?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety +1

      Tom Nguyen aha yes springs will also good option for the sportier looks . Apologize not making the video clear as possible :( . With my current ride ive only drop it 1.5 inch all round so i didnt do the camber kit . There wont be much camber on the rear tires. But if you are going for slammed looks . Definately camber kit are needed to correct the tires angle. :)

  • @bapagerobby8253
    @bapagerobby8253 Před 6 lety

    Add on ada yg polos ga bro yg ga pake lampu dan setelah pake coilover gimana handling dan tingkat kenyamanan dari mobil bro skrng

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety

      robby dio halo bro. Untuk add on lips depan ya. Yg saya pake itu cuma front under garnish dari Mazda OEM accessories. Untuk lampu LED bar nya beda lagi itu Mazda OEM accessory luar negeri. Performa setelah pasang coilovernya lebih baik dari pada standard yah kalo menurut sy, body roll berkurang. . Soalnya sebelum pasang coilover rasa kenyamanan di bagian belakang sedikit terlalu keras buat saya. Tapi sekarang setelah setel lebih terasa empuk dijalan kita.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety

      robby dio coba bro liad di katalog garage vary untuk add on lips. Di Jakarta sudah banyak toko yg jual ada yg replika taiwan / thailand nya jd gk gitu mahal. Stylenya juga simple dan mewah.

  • @fauzanbaihaqy4463
    @fauzanbaihaqy4463 Před 4 lety

    Untuk meninggikan atau mnurunkan shock bagian belakang, yg di adjust di springnya atau di shocknya?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      Adjust di Spring nya .

    • @fauzanbaihaqy4463
      @fauzanbaihaqy4463 Před 4 lety

      Felix Dan ohh spt itu, saya kebetulan psang utk mazda 2, sudh dapat fitment ny, tapi kalo didongkrak bagian belakang, pernya sepeti ingin copot krn ga ada pressure dibagian springnya, seperti molos gitu, jadi shock nya ketinggian gitu pak

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@fauzanbaihaqy4463 iya btul jika per nya seperti mau copot brarti preload spring nya masih salah. Harus setting shocknya juga di pendekin spaya sesuai dengan springnya.

    • @fauzanbaihaqy4463
      @fauzanbaihaqy4463 Před 4 lety +1

      Felix Dan jd yg harus sy stel shock nya terlebih dahulu ya pak? Baru springnya?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@fauzanbaihaqy4463 btul skali. Kalo fitment stance stelan shocknya kasi pendek mentok saja .

  • @baniangga4886
    @baniangga4886 Před 4 lety

    Hi Felix Dan, saya mau pasang coilover. Ada beberapa opsi tein, tanabe lalu lihat BC jadi pengen juga. Tujuanya cuma mau lebih comfort dari standard yg terlalu kaku. Dan sebisa mungkin tingginya sama dgn standar. Pakai BC bisa sama kah tingginya? Kalau diset max tingginya turun atau sama berapa cm?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety +1

      Kalo pasang coilover dengan settingan tertinggi bakal lebih rendah mas dr standart. Coilover bs di setting keras lembut nya. Kalo kemaren BC racing sy pernah setel damper nya menjadi lembut dan itu nyaman bgt dr pada suspensi standart. Kalo Tein atau Tanabe bakal lebih empuk lagi soalnya merk jepang lebih bagus buatannya. Dengan coilover setelan turun nya bisa sampe dengan 4" - 5" tergantung modelnya. BC lebih ke arah budget coilover.

    • @baniangga4886
      @baniangga4886 Před 4 lety

      @@FelixDanGarasiAuto kalo pakai shock absorber tein endurapro plus compare coilover, apakah lebih tinggi shock absorber? Tentu ganti per tein juga.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@baniangga4886 tein endura shock ya. Ketinggian mirip sama standart tp jauh lebih empuk dari standart. Kecuali mas ganti juga ke lowering spring Tein S tech mobilnya jadi lebih pendek 2 inci.

    • @baniangga4886
      @baniangga4886 Před 4 lety +1

      @@FelixDanGarasiAuto terima kasih. Informasinya sangat membantu

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@baniangga4886 sm sm :)

  • @dszirsanjaya1319
    @dszirsanjaya1319 Před 4 lety

    Mas.. knp ga pake eibach aja?? Apa beda nya sih selain bisa di setting2.. saya mau beli eibach.. tp tmn ad yg jual bc ini 5jt.. jd bingung.. soalnya saya baru pasang 20 ban 255/45.. duh kerasa limbung bgt.. biasa nya di tol berani 140.. ini 110 udh berasa getar2 halus.. apa lg klo niking..

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      Halo bro. Apakah sdh di balancing roda nya. Seharusnya tidak bergetar sih.. coilover kelebihannya bisa di atur tinggi rendah nya dan keras lembut nya. Jadi setting sesuai pemakaian sehari hari. Tapi kekurangannya kalo coilover nya uda bekas pakai lama biasanya penyakitnya shocknya aga lemah dan bisa terjadi suara berisik di kabin mobil dan kurang stabil. Eibach juga sbnernya bagus. tapi tidak bisa di setting tinggi rendah. kalo tidak mau ribet pake lowering spring aja.

    • @dszirsanjaya1319
      @dszirsanjaya1319 Před 4 lety +1

      Lowering spring mksdnya sperti eibach ts ato tein ya? Mslhnya bro.. gw pgn turun sedikit bgt..

    • @dszirsanjaya1319
      @dszirsanjaya1319 Před 4 lety +1

      Balance sporing sih udh.. cuma di tmpt yg krg meyakinkan.. mgkn klo jd ganti eibach ato bc gw sporing tmpt yg bagus.. wkwkw

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@dszirsanjaya1319 bener bro. tein atau eibach lowering kit. udah pas kalo mau turun dikit aja.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 4 lety

      @@dszirsanjaya1319 spooring dan balancing ulang aja nnti stelah pasang lowering kit.

  • @psykonixXx
    @psykonixXx Před 5 lety

    How's the ride? Is it more comfortable than stock?

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 5 lety

      Yeap . Its nice better than stock.

    • @supra95ful
      @supra95ful Před rokem

      @@FelixDanGarasiAuto is it a huge difference or just slightly better??

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před rokem +1

      @@supra95ful just slightly better as these as the basic entry level coilover.

  • @awenso8324
    @awenso8324 Před 6 lety

    Bro felix..kalo.boleh tau coiloverny beli brpaan ya..gmn rasa memakai coil overny?? Bantingan suspensi masi terasa keras gak??soalny cx5 kan terkenal suspensi keras..tq

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety

      Hi Bro , Kalau baru harga retailnya 12jt an . Untuk bekas saya kemaren lihat ada yang mau lepas di 9jt masih bisa nego . Bantingan suspensi lebih empuk tapi harus di setting dampening nya pakai fitur dampening adjuster di coilovernya nanti tinggal di puter saja berapa klik" sesuai dengan pemakaiannya . Kalo di setel maximum setting sudah pasti lebih not comfortable banding dengan suspensi Original Mazda CX 5 , saran saya kalo di set sekitar 6 - 8 klik medium setting (depan & belakang) sudah cukup comfort lebih enak dari suspensi original Mazda CX 5. Thank you

    • @awenso8324
      @awenso8324 Před 6 lety

      Felix Dan uda jelas lembut ya suspensiny ya..gw boleh minta WA bro aja..supaya lebih enak chat..btw tq bro felix

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 6 lety

      082161192483 WA nya . Thank you . :)

  • @felixdada4416
    @felixdada4416 Před 5 lety +1

    Felix Dan Do you have the halogen or led headlights ? I have halogen and wanted to delete the fuse of DRL lights, but there is no fuse.(H15 has got the high beams and DRL combined). In a video I saw a guy deleting that fuse and it worked.How is it possible that my lights work if there is no fuse? ( maybe it's a European solution that you can not easily delete the fuse)

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 5 lety +1

      Mine r bixenon version . I would just take out the bulb out if theres no DRL fuse on the fuse box . Otherwise bring to dealer to disable via mazda obd computer .

    • @felixdada4416
      @felixdada4416 Před 5 lety

      Felix Dan yeah I can try to ask the dealer, but most of the time the have no clue about "their" on product. If I would take them out I will have no high beam, because the H15 bulbs are 2 in 1 ( high beams and DRL).
      Have a nice day ;)

  • @felixdada4416
    @felixdada4416 Před 5 lety

    How much does this set cost. I also consider doing this , because my Mazda 3 is pretty soft in the back.

    • @FelixDanGarasiAuto
      @FelixDanGarasiAuto  Před 5 lety +1

      I bought mine 2nd hand . Got it for around $700 USD. New they cost about $1000 usd .