Church Stream Audio Setup - Louder Stream Audio LUFS
Vložit
- čas přidán 21. 07. 2024
- Church Live Stream Audio Setup is one of the most important things you can set up on your audio console. Making sure you have enough loudness to your live stream and a clear sounding EQ curve are essential for ensuring the best stream quality.
Read more on my blog post at: drewbrashler.com/2022/better-...
Become a member and help support me and my channel: / drewbrashler
Find more resources and downloads at www.drewbrashler.com.
Chapters:
00:00 Intro
01:14 How to Insert the Precision Limiter
02:12 Precision Limiter Settings
04:59 Using the Precision Limiter
06:27 Starting Settings for Precision Limiter
07:45 Tip #2 for Improving your Live Stream Audio
08:22 Equal-Loudness Curves
09:55 Adding an EQ Curve for Equal-Loudness
14:04 Conclusion
Been using that Precision Limiter for a while. Great stuff! I’m going to try the EQ as well to see if that adds some extra punch and clarity.
Thanks for the lesson!
This is pretty baller. I enjoy the art of sound design and the measure of scientific application to this video was perfect for that understanding. This is literally the solution to our stream mix loss of low end. Thanks!
I didn't know there is a limiter in fx section so I use the compressor to the max reduction and reacting super fast. I got great results but now I know this is the right way and im going to do it, thanks for all your videos, they are super useful :)
Love your tutorials. When I inserted the limiter it made it sounded like we were in a tunnel.
Sir you literally saved my livestream audio🔥🔥🙏🏽 Thank you. Huge difference!
Thank you so much for sharing this information with us
Thank you Drew, this is really helpful for me
Wow this is so informative! Thank you so much!
Thank you for this! So helpful!
Your videos are gold!
Thank you for this video, it's touching on the problems I'm having on our live stream , You've been a blessing on teaching us keep up the good work ! Can't wait to try this out !
One thing I noticed when the volume was lower and the PL applied was that you could make out more of the high hat of the drum ins addition to the warmth of the bass. It was muddied when the volume was reduced and one the PL was applied, there was more definition to the high end of the drums and even the guitar was a little more define.
You could tell it was being compressed because it was ever so "quieter". but that is addressed by just adding more or less compressions, input, gain, channel volume etc.
Great video
I’ve been using the clarity meter for a while now. Works great for levels. Only thing is the x32’s limiter will let overs thru so take ur ceiling to -4 and expect peaks around -2.9.
Thanks Drew really appreciate sir
Woow, im going to implement this, my streams sounds too open and clean... thanks Drew will implement the fletcher monsoon theory
Thanks Drew. I hope to try this soon. What I've been doing is that my cam mix is routed from my FOH, it's only calm and nice when one person is speaking through the mic and then clips when the choir begins to sing. I've tried reducing the matrix but it also reduces the pastor's mic the same thing applies to my livestream. I don't want to be moving faders for my livestream. I'm expecting your feedback soon thanks
Fab. Thank you!
This is great!
the information in this video is impeccable; thank you sir! what's your take on slower attack faster release?? for limiter settings
00:02 Use precision limiter for precise loudness targeting
01:33 Setting up precision limiter for streaming
03:13 Adjusting audio settings for optimal mix volume
04:46 Optimizing stream audio setup for clarity and volume
06:59 Boosting stream loudness for audience engagement.
08:54 Listening at different levels affects tonality
10:35 Adjusting EQ curve for front of house mix
12:20 Adding precision limiter and eq curve improves stream audio quality
Crafted by Merlin AI.
Thank you very much for the excellent videos, they are very helpful. Could you please make a video on how to setup the rear bus for the X32? I searched for your channel and I couldn't find it, if there is any, I would be happy if you share the link.
Man solved man thanks
Hey Drew thanks for your awesome videos, you are a legend. I put the Precision Limiter on, but I'm getting dropouts of some instruments (the piano is fading in and out, and you can't hear the female vocalists, and the drums are buried too), and strange artifacts, which I guess are the pumping talked about. I saw this video from James Attaway on doing the compression in stages (bringing my mix into the matrix as a few Mix buses already compressed - ending up with a fairly flat mix for the Precision Limiter to work with) and I hope this improves things next week. It would be great if you could do a followup video, and feel free to use our church's content as a negative example! :). I've learned so much from you and still there's a way to go to get this right. I thought we weren't loud enough, but I realized I was overdoing it, and it was distorting, and then FB/CZcams turned me down again, so I started turning things down and it got clearer. Going to install that LUFS meter!
czcams.com/video/nsl1oSh0bdM/video.html - our church stream from today 🤦♂
Unifying the mix for streaming (Live Stream Audio Compression in stages), from James Attaway czcams.com/video/tHT9gLLeGM8/video.html
good stuff, thank you, do you have a complete set up on live stream from start to finish, also i see some use the matrix for live stream, some use aux buss out
Thank you!
Hi Drew. Awesome page. So I'm doing sound for our church, it's my first time but I took on the challenge. I routed my pastor's monitors on on mixbus 1 and 2 but these 2 channels are now controlling my main volume. My sound is not getting loud enough when I increase my mains volume until I push the other 2. Where did I go wrong, please help.
Can you please do a similar video for the Behringer Wing X?
thanks for the video, from where are you routing the sound to the strem monitor? having issues with that and I'm routing it from the matrix to monitor 1 & 2.
Interesting Drew. I do have a couple of questions for you. I will explain the situation the best I can, and hopefully you will be able to respond, so this is going to be a little drawn out, but please bear with me. We do a live feed on U Tube and Face book each Sunday. We have our X32 set up in a way that allows us to have a mix for FOH and a separate mix for the live feed. We use the Reaper DAW for the live mix, and have an S16 for the first 16 channles and use a analog snake for 17-32, and by the way having volume issues on the live feed, I did check the LUFS levels allowed by Face Book, and U Tube (which is, I do believe, 16 for Face Book and 14 for U tube), and started using a limiter on the master track on Reaper and monitoring the volume with a LUFS meter. As we started doing this, experimenting with different things, we were always having issues with constantly changing inputs on Reaper to coincide with configurations on the X32 (i.e. channel 1 configed input 5, channel 2 configed input 3, channel 3 configed maybe input 10, depending on what input was used in the stage boxes for each Sunday. We tried to create a constant, but with several people unplugging and plugging into different inputs on the stage boxes, it became quite a hassle to keep up with changing the the inputs on the Reaper platform. So what our main media guy did, and how he figured this out I have know Idea, was set up the brain on the X32 to assign reaper with certain inputs regardless of what the inputs are on the X32. So what we have ended up with is the inputs on the X32 are 1 for 1, 2 for 2, 3 for 3, and 4 for 4, then at channel 5 on the X 32 we might use input 9, or input 7, or what ever input we may need for each given Sunday, for the simple reason that we have several different musicians that paly from week to week and they may stand in a different place from where the last one might of stood. Hope you are with me so far. So as it is Reaper is set up to recognize track1 for 1, 2 for 2, 3 for 3, and 4 for 4, then at track 5 on Reaper it goes to input 16, track 6 is input 17, trak 7 is in inp 18, 8 is inp19, 9 is inp 20, and from there out to track 20 the inputs are all over the map, but like I said Reaper recognizes that as a constant and we never have to change any inputs on Reaper. Just recently we added a mic kit for the drums, so instead of just using a 3 mic setup on the drums we know have the drums completely mic'd up. I have the kick, sn, tm1, tm2, tm3, and 2 OH's, starting with channel 17 on the X32, and track 18 on Reaper, and was able to use input 25-32 on both the X32 and the Reaper program because he (the media guy), left those inputs available for the drums knowing that would never change, so the kick is input 26, sn is 27, tm1 is 28, and so on and so forth for both the X32 and Reaper. Because of some volume issues with the drums we did some checking and determined that we have an issue with the analog snake, so we are in the process of adding the second S16 to complete the last 16 channels in digital. Now with all that being said my first question is, once we get the 2nd S16 connected and I have gone in and changed Local17-24 and local25-32 to ASE17-24 and ASE25-32, will Reaper still recognize input 25-32 as being available as it is now? And my second question is, do you have any idea how he (the media guy) assigned the the inputs in random order to the Reaper platform like he did so that Reaper sees them as a constant? Sorry about being so long winded, but I felt I needed to explain it in a way you could get the full grasp of what I am trying to get done once I get the other S16 hooked up. Also the gentlemen that was our media person is not with us at this time so and I need to get this figured out. Thank you for your time.
When we set the input gain at -5, where the streaming matrix fader set at ?..
What happened to your Wing lessons?can you do this on the Wing.
Hi drew please how can I tap my metrix out into my stream i already hv it set to output 13 m 14 put i can find it on my laptop through x usb what should I do please
Drew, where do you insert the precision limiter, pre or post eq?
Quick question I’ve been trying to eq recently and I updated the mixer to 4.9, however. I can’t see anything when I click on a channel, EQ, and VIEW. I see the green bar go up for sound but nothing on the x32 screen to EQ, help.
I’m having problems with live-streaming. It’s very loud & extremely distorted. Can you help be bring a balance with vocals and band.
How do I set up a stream output on my console
Thanks for the video Drew! Just wondering about the output gain on the limiter, you said -5 dB, but the screen showed -0.5dB. It confused me a little so i want to confirm that you meant -0.5dB right?
-0.5 is -0.5 dB, just under unity, not -5.0 dB. Which is it?
CZcams or Facebook wants -14 LUFS at least. You can go louder. I usually aim for -8 to -7.
Hey Drew, what microphone are u using on this video. Its so smooth and clear?
How do u always get d best far snare sounds av been wanting for a long time. Which brand of snare do u use and how do u get dt fat sounds.?
I think you should check the drum heads you use, the wood type your eq and little vintage reverb
Noticed you said output gain set at “negative five dB”. But then your setting is -0.5dB. Do you mean point five?
Yes -0.5 dB
He said negative point 5
-0.5 or -5 dbfs?
you missing something?
-0.5 dbfs for sure
We do -14
The equal loudness curve should not be used. just use a good spectrum analyzer like Voxengo Span that can also show your LUFS in realtime