DIY Flying bike - Motorcycle to Hoverbike - Modified version
Vložit
- čas přidán 19. 02. 2024
- Hello, friends!
In my previous video, I shared with you the process of creating a Hoverbike that was supposed to lift off the ground by a few meters and hover in the air. Unfortunately, we didn't achieve that goal at the time.
Many of you wrote to me suggesting that I should modify it by adding electric drone motors for stabilization, and others mentioned that the propellers should be repositioned higher than the center of mass. Well, I decided to take your advice and have now revamped the Hoverbike, with the propellers now positioned significantly above the center of mass.
What do you think of this version?
Please share your thoughts in the comments, and don't forget to share this video.
For those who are seeing this video for the first time: this project is about transforming an ordinary motorcycle into a Hoverbike, aiming to merge the thrill of motorcycling with the cutting-edge realm of aviation. Join me on this journey of innovation, where we explore the challenges and triumphs of making a bike fly. Let's dive into the details of the modifications and see this Hoverbike take to the skies!
#hoverbike #flyingcar #flyingbike #mwig - Jak na to + styl
Even if it doesn't end up flying for now, his skills as a Fabricator are MIND BLOWING! I love it XD
Calculate the right attack angle for each blade to help create the correct lift for the propeller.
In the image we can see that each blade seems to have too much turned angle...maybe set them more horizontal !
Install a ring around each propeller so it would control the airflow up and down. Right now the air is going out to the sides. You can see it in the video how the propellers are blowing everything to the sides. With a tube around each propeller you would control the airflow coming from above the bike straight down so it would give you lift at much lower rpm.
but stiil been so heavy, the propellers may not be the right ones and it needs a lot simplicity with a plus carbon fiber elements. I sugest calculate this machine for better results.
That’s the least of the problems. A quad copters propels spin at different rates to keep a level.. of the skirts more than a few feet off the ground that’s going to flip. This is a huge waste of time. Pointless. The Dude must know this and is only doing it for CZcams viewers. But there will be enough dumb people to believe at all Work and will watch it unironically
Ducting will not solve this problem
@@GordonScottYankeeEngineer But it will help, and it is a good starting point.
@@GordonScottYankeeEngineer Carbon fiber would be ideal but keeping with his metal working background make it out of 1.2 mm aluminum with ribs from same aluminum to give it some strength. By using a motorcycle the hole thing is shot but it is something to keep viewers engaged. Need a much smaller gas tank, much smaller seat and remove everything of off that machine that he can. But like I said I don't think this is truly meant to fly high.
Are you ready for premiere guys ?
yes please hurry up… 2 months of waiting 🤦🏻♂️🤦🏻♂️🤦🏻♂️
26:13 🥺🥺 .. change the propellers … and add gear ⚙️ or change it it’s very slow.. don’t focus on the weight right now.
Yes, but faster 😅❤
I don't understand why no motorcycle 🏍 or moped 🛵 company has built a trike moped similar to yours (in your previous videos) with a recumbent seating position & lightweight aerodynamic removable weather enclosure. So the 🛵 could be used all year in rain, cold and light snow. Just like a car but get 75+ mpgs using a 300 to 500cc scooter engine & cvt drive train. So it could go 80 to 85mph capable of traveling on USA 55mph hwy & 75- 85mph interstate systems. The aerodynamic enclosure and recumbent seating would make it about 35+% more efficient. Than the upright riding position of a motorcycle where your body is creating major wind drag.
JUST BUILD A 1000CC HELICOPTER. SHIT WILL HAVE CRAZY PERFORMANCE
Great work, even if it didn't fly. Get a smaller engine, make thinner blades, spread them wider apart, and ditch most of the bike. Thrust to weight is the key.
He isn’t taking weight into consideration whatsoever
@@600wheelI agree. However, it's all learning. Learning takes mistakes to gain experience.
@@criticalmass181 I would think something like weight would be obvious to anybody attempting to build something like this
Lessen weight of unnecessary items of bike, larger engine, larger blades. Far far too complicated to try to do adjustable blades for collective. It would be possible to add extra vanes to act as a cyclic control, but leaning in a craft that small will accomplish that. As far as ground effect, when you lift off, you lose ground affect as you ascend. A helicopter does not have the propeller near the ground. They depend on much larger airfoils/vanes and engine HP / speed.
You have to increase lift from propellers and lose weight. You were 360kilos on bike engine/frame before installation. Now maybe double that 700+ kilo. 1,500-1,600 pounds will take much large air movement to lift the craft that with everything added was pushing 900 kilo. 2000 pounds (USA) =909 kilograms.
I really respect your determination.... Remember, the difference between success and failure, is determination..
your YZF R1 has plenty of engine power. What you need to make your drone take off is either bigger propeller blades or a higher ratio in the gearbox. The engine will take longer to get the propellers up to speed, but in return you will get much more lifting power and at the same time you will get much more control over the drone.
It’s all about love… 😍
Keep up the good work… 👍
Good point!
@@meanwhileinthegarage🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
More .....👇
🔴 THE RETURN OF JESUS
Can’t wait to see the latest update on your wonderful machine 👍
Отличная идея! Ховербайк явно нужно немного облегчить, такое ощущение, что не хватает совсем немного. И главное - предлагаю поменять передаточное соотношение - поменять звёзды, и, таким образом, поднять обороты на винтах еще сильнее.
Great idea! The hoverbike clearly needs to be lightened a little, it feels like it's missing quite a bit. And most importantly, I suggest changing the gear ratio - changing the stars and thus raising the rpm on the screws even more.
облегчить убрав седока))
Usar conjuntos de engrenagens nas hélices aumentaria muito a rotaçao delas e diminuiria a do motor da moto.
Waw, looks like a lot of work since the last video. And you are alive and well, that is good 👍😁
It was a great try. I'm looking forward to seeing the next update on your flyer. I've been a fan of your channel for a long time and I absolutely love it!
Thanks bro. I really appreciate it.
I'll keep saying it...your a genius
My favourite engineer/machinist/fabricator on here (sorry Kurtis and Adam 🤷🏻♂️)
Маша Аллах1 давно смотрю вои эфиры и с огромным интересом смотрю Дал аьтто Бойл
Амин, вай массери бойла АЛЛАХ1А аьтто сан ваш
So close to taking off I wish you had a video every week, better luck next time 👍👍
I will try my best
I agree, you are a very skilled fabricator and engineer. It won't fly because its too heavy. To produce enough force, you would have to have propellers at least 2.5 times the mass of the rig. Even then, you'd only get a few feet off the ground. If you had materials just as strong but at a quarter of the weight could work too. Whether it flies or not, we will all be cheering you on!
His creativity is on another level ❤❤❤❤❤
that looks like it's balanced better and safer.
Мовсур я на испытаниях аж покурить вышел. Мне кажется в ногах пропеллеры безопаснее выглядели. Берегите себя!!!
Спасибо Михаил. Не передать как страшно было)))).
Something to consider, although it may have minimal effect here, is the force pushing the assembly down from the airflow moving against the upper grill, your body, the motorcycle, and the drive covers below the bike. If you could reduce this in some manner, it may help. I'm sure having the upper grill between you and the blades is great protection, though. Most drones have the blades in free air with minimal frame material in the air flow. You've probably thought of this already. Really appreciate your effort and craftsmanship.
Цхьа К1ант вукх хьо !
Цхьа к1ант вукх хьо. Вот так будет правильно, main Freund.
Don't give up.
Дружище! Главное не сдавайся! Всё получится! В следующей части обязательно полетишь!
Directly from Brazil, we followed your saga in this project. I wish you success.
МашаАллах! Вы какие молодцы, подкованные технически. С уважением из Дагестана
توجد 2 مشكلة :-
1- عدم وجود دعامة قوية بين الأرضية والسقف.
2- الوزن، لا يمكن لسقف حمل وزن الدراجة وباقي أجزاء الأرضية.
أقترح زيادة عدد الأجنحة أو تقليد فكرة الطائرة المروحية بوجود جناح كبير جداً.
شكراً لإستمرارك بالمحاولة، هذا شيق حقاً، واتمنى أن تنجح.
A helicopter pilot friend of mine was trying to build a similar vehicle 15 years ago. This design was a mixture of a jet plane and a motorcycle. We made a "mockup" together and he went to a fair in Dubai with the mock-up to find sponsors. But he couldn't find anyone to give 1 million dollars. :D His hoverbike design was just like yours, but his had a small helicopter engine under his seat. Instead of propellers, there were 4 fan outlets, just like on Harrier planes... But when he could not find a sponsor, he wanted to use this "mock-up" in a different way. He built a huge robotic arm powered by hydraulic pistons and mounted that "mockup" on the end of the robotic arm. He also sold this new toy to an amusement park :D
(I will leave the Google drive link of the photos of the design under this comment , I hope the link appears.)
Send him the link via email for him to put into the video description otherwise the link is not accepted by CZcams. Links here are accepted for another CZcams videos, that's all.
An amazing job guys! Love watching your videos!
You should just remove the engine, sir, and the body of the motorbike, so that it reduces the weight, but you don't need to increase the load, and I will support you enthusiastically
Везчу Дала аьто бойл хьа, са вош.
Амин, хьаъ бойл са Ваш
Амин!
When something goes wrong, it's not a failure, it's a learning experience...congratulations for the idea !
Kreatip and inovatif good like
Delete the wheels and replace them with skis or nothing at all - this will reduce the weight. Every gram of weight counts.
the moto is too heavy !
Bro!! You got this. I feel you’re on the right track.
Ассалам алайкум..Дел рез хил хьуна массо х1уман а...Ин ша Аллах беркате дохийла хора доху де..сан ваша
Ва1алайкум Салам, баркал са Ваш.
Too heavy carbon, fiber, better material, and your propellers are too small😂😂
In place of these equipment you can use drone moters I'm sure this machine will take off
Must say your determination will pay off in the end but weight is your big problem
Лопостиш жим йаккхий хил ези техьш аьл хет сун👌
Can wait to see the next one, thank you for the video and i appreciate all your hard work.
Hey, that's ok friend!!!
Thank you for teaching us to be brave and try things even if the result is not guaranteed. We will still learn A LOT in the process and approach the next try with a LOT of knowledge we never had before.
Очень интересный проект, братья! Успехов!
Молодец. Дал аьттув боакхалба хьа.
МашаАллах1, Дал т1аьхье беркате йойла👍👍
Амин, хьаъ Йойл са Ваш
Давно смотрю Вас, экстремально. Берегите себя! Несущие винты у земли с одной стороны выглядели опаснее, с другой вероятно, создавали большую подъемную силу, в начальный момент поток ближе к земле, ну и валы с крепежом добавили веса. Удачи Вам!
Инша Аллах1 т1ем йокхар ю ахь и ☝🏼😄 Дал аьтто бойл хьа!!!
Инша Аллах1, амин хьаъ бойл са Ваш
The first one near the ground was good you just needed to put rubber skirt around the bottom to help keep the air from getting away' Then you need propeller behind driver to propel him forward and a way to move the propeller behind him for turning.
I think,you are the best because the inspiration to created for something you have do it.
උත්සහය වටිනවා.
Awesome try, now you at least have a whole shop air fan😂😂😂 you are quite an engineer 😊
Thank you for this prototype that you builded (i had exactly same idea, but no funds). I think it would fly yet, just after small corrections, i would make wider X under the bike, bigger propellers - if 4 couldn't lift, make 6. If you watch carefully center of gravity moved forward (back of the machine want to lift more that front).
Increíble las cosas que haces. Excelente trabajo. Te felicito
You are crazy man) Amazing work!!!
Barkal
You are amazing bro!
Be encouraged. You will succeed in the end
I hesitate to make any comments sitting in a chair and having never built anything as beautiful, brilliant and complex as you have. I have read that power required goes like the cube of the prop tangential velocity, so two big and slower turning contra-rotating propellers might get you more lift for less power. Best of luck.
You're right about the weight, and reducing it down to two rotors is the right idea, but co-axial rotors is very complicated and you'll lose more power to mechanical inefficiencies. What you need is a something like a Chinook helicopter, fore and aft rotors, counter-rotating to counter out torque, and staggered, (aft slightly higher than fore) so the blades can actually over-lap each other. That, and drastically reducing the weight !
Золотые руки у тебя, мастер. Respect
don't give up Movsar
Huge fan since you started. I’m a retired mechanical engineer in Kentucky USA. I wondered from the beginning of this build why you didn’t apply twist dynamics on your propellers. They, and I’m a novice in aeronautical engineering, but it’s my understanding that they create more force because the hub spins faster than the outer of each propeller. Ie. more twist, more force., also more stability. Good luck my friend
Huge fan! Pun-tastic...
Tip speed is always faster then the hub speed
Good Effort Bro
Best Wishes from India 🇮🇳 Karnataka
The fanes size is small according to weigh.we encourage your work.God you give success.
Love u brother i am happy for you great work whenever i am depressed i use to see your videos again again and get motivated jazakAllah khairan kasreea
Ameen. JazakaLLahu hayran ya Ahi
Попробуй по два пропеллера на каждую ось, как вариант 👍
على ما أعتقد أن الوزن كبير بالنسبة إلى المراوح الله أعلم.
على أيت حال مشروع جد رائع، شكرا.
Buen video.
Tranquilo que ya casi lo tienes.
Congratulations, you are doing a very great job, keep it up.
Bigger tinier blades spread apart further more, reduce the weight. Good luck.🤘
Bro never stop work one day you succeed 💯 😊
Seeing you doing your test flights reminded me of Neil Armstrong doing similar in NASA flying machines. Keep safe and carry on building your wonderful machines.
You make it look so easy..
Nice way to clean up your shop...
Спасибо за твои работы. у тебя все получится
Version 2.0 makes much more sense, but V1.0 looked bad-ass!
You are really close and I agree you need to drop some mass to fly. If you have access to four load cells then use them in a full power runs to see what the apparent load is at full throttle. That should give you your mass reduction goal, I'd say about 10kg should do it. Try a run with minimum fuel and a muffler deletion.
Parabéns
.. seus projetos são sempre muito legais
Transforma em um hovercraft
Great video, always enjoy your content.
Definitely need a stronger motor, OR to replace some of that steel with aluminium.
Double (2 layer) rotors might work since they can grab more air as they spin.
Another option would be to extend the platform to the front and back, then change where the rotors are positioned (1 pair further to the front, and 1 pair further to the back.) Then put a third set of rotors in line with the middle of the bike.
This thing is epic! Even if it doesn't fly
😮😮😮 пыль сдувать 😮😮 просто супер
Всем здравствуйте. Как всегда автору большой респект за проделанную работу и конечно же лайк. Очень хочется что б этот проект поднялся в небо, поэтому хочу поделится мыслями. Авиостроение вообще не простая вещь, при создании летательного аппарата всегда много проблем: масса, тяга, устойчивость, управляемость и еще куча всякого...
По этому поводу думаю что в районе руля много бесполезного железа. Выбрать металл из всех не особо несущих плоскостей. Постараться максимально уменьшить массу. Каждый грамм на счету. Все таки может стоить подумать о замене винтов. Продаются же деревянные для парамоторов. Сделаны с хорошей геометрией, да и тяга известна и оптимальные обороты. От этого можно будет оттолкнуться и посчитать массу и задать нужное количество оборотов. Опять же уйдут громоздкие ступицы. Вот такие мысли, удачи и с нетерпением жду продолжения.
Great work bro, even if it didn't take off. Hope you may forever be successful .
Зробіть гвинти трохи більшими, дякую за відео, як завжди класний контент.
I believe that you need bigger propellers and that maybe you should change gears so that the bike is not revving so much.
I would love to see this project literally get off the ground.
So good luck and I am waiting with bated breath for the next video.
Kind regards Richard from Dronfield United Kingdom
maybe put the some circles around the fane. that may help the air to go down directly into the ground.
Never give up! 💪
Just a man, in his bunker, building some cool stuff...
Your videos are SO AWESOME!! 😆🥰😍🤩😃🏍🚁🛸❗
Glad you like them!
I wonder if the fans were ducted a difference would have been made. Great attempt guys ,
free phalstin ❤❤❤ thanks for your vidéo ❤ your fan from Algéria
Set it up remote control and see if it lifts without you on it , To give you an idea how much weight you need to reduce .. You do awesome work don't give up on it , Cheers.
Аллах1а аьтто бойла хьан!
Ты вообще молодец!!! Идея просто прекрасна!!! Круто!!! Просто мощности не хватает. Я сразу понимал что не взлетит, и сразу понимал что ты зря новый мотоцикл купил. Тут нужен автомобильный двигатель 70-80 лошадиных сил, а не мотоциклетный 15-20 лошадиных сил. Ну то есть в 4 раза мощнее нужен двигатель чем тот, на котором ты пытался взлететь. ПРОДОЛЖАЙ!!! НЕ ОСТАНАВЛИВАЙСЯ!!! ВСЕ ЖДУТ ПРОДОЛЖЕНИЯ!!!
Дуже гарно,КЛАСНА ІДЕЯ
I dare to say: less weight, and largest propellers!...but I am a doctor not an engineer☺...@2010invent idea seems to be very interesting too. Anyway, you're a fantastic mad constructor and I' m always waiting for your videos...go one this way as far as you can!!!
You gave it a hell of a try I think it should be much lighter
widen the cadge length and width longer blades but thinnen. go back to the previous design but raise the plat form up off the ground 3 feet. by doing this you will max air flow and have better stability
Good try.. we loved your work.. you are brilliant creater
Cleans the shop very quickly. 😂
I think you have to try changing the direction of the engine exhaust air direction.down instead of up.good luck bro
You should be able to save some kilos on the bike frame, it is built to take torque and road-bumps, other than that an inch wider rotor diameter might do more than higher revs on the rotors, but what do I know, 😋😋 Love the build by the way.
Instead of open propellers, use ducted fans. They would be easier to direct the airflow also.