Thanks a lot. Received quotes in the $400 neighborhood. Haven't changed plugs in probably 40 years. Watching your video convinced me to set up an appointment to have it done. :)
Thanks man. Your video really helped me. I just bought my 2010 Enclave yesterday I couldn't figure out how I would be able to change those spark plugs without moving the engine. Lol. Now I see to just move the intake manifold. Thank u.
I’m doing my wife’s ‘08 this weekend. I hope it goes good. I have changed struts on the front and rear, outer tie rods, and my breaks. Breaks are easy though. My local mechanic told me to change them myself so it would save me money.
Thank you very much for doing this. I was able to change the plugs and gasket in my 2010 Chevy Traverse. This sure helped a lot and I appreciate you doing it. Saved me some $$$!!!
I guess Im asking the wrong place but does anyone know of a tool to log back into an instagram account? I was dumb forgot the account password. I would appreciate any tips you can give me.
Daniel thank you so so much for putting out this detailed video. I was able to change spark plugs and ignition coil on my 2011 Buick enclave cxl with approx 134000 miles. Daniel i would be more happy to talk to you over the phone or exchange email with you if you do not mind. It's hard to put some things in words for the grateful you have shown by putting out this and other video for this vehicle
I was thinking the same thing when I saw the Snap-On torque wrench. Maybe he had a mechanic buddy overseeing him???? However, the spark plug socket was missing magnet or rubber boot to hold plug so maybe just borrowed the tools?
.043 inch gap on the plugs. They came pre-gapped and he just checked them. I cleaned my 2012 Acadia throttle body and as I recall the check engine light came on for a few cycles and then never came back on. That was about 3 yrs and 15,000 miles ago.
Hey I replaced my spark plugs on my 2010 Buick enclave and now its showing 2 misfires and it wasnt showing no misfire before I replaced them. What should I do?
I don't know if it's just GM or what, but they seem to make it harder for the Do-It-Yourself kind of mechanic to work on their vehicles. Spark plugs used to be out in the open. Now you have to take off the intake manifold? I was going to replace the fuel filter and transmission fluid filter, but I couldn't because the fuel filter is integrated with the fuel pump and the transmission filter is buried deep in the transmission and only replaced during a full service. Ridiculous. But thanks for posting the video!
Yeah these companies know exactly what they are doing. They don’t want us fixing our own stuff. They want us to take it to the dealer. I feel sorry for mechanics that have to work on these modern vehicles. It is so expensive these days because of how long it takes to do stuff.
Oye, yo tengo una 2008 enclave, me sale el check en el tablero y me arroja el P0330 y P0430, como lo soluciono? y la puerta de la cajuela como que quiere abrir pero no, si se oye el ruidito que como que quiere abrir pero simplemten no la abre, manual si.
U can youtube how to reset it. Its really easy. I found that it will not work if your chk engine light is on. If it was previously on this may be the reason for the need to reset.
sup homie here's the link taht shows wher's the camshaft sensor hopefully will work for you. Thanks www.justanswer.com/buick/4w248-buick-enclave-cxl-replace-crankshaft-sensor.html
Richard Longoria thanks for you comment, just go to AutoZone auto parts and ask them for the service manual for a 2010 buick enclave. I bought mine for I think $35dls. Good luck.
When working on any part of the engine definitely dealing with electrical connections it is always best and smart to unplug the negative connection on the battery better safe than sorry
Lmmfao. All y'all who post vidz of doing plugs. Y'all do to much work because you don't gotta remove anything but the evap purge valve. Them you can do plugs with no issue or removal of anything
Thanks a lot. Received quotes in the $400 neighborhood. Haven't changed plugs in probably 40 years. Watching your video convinced me to set up an appointment to have it done. :)
You're welcome 👍👍
Thanks man. Your video really helped me. I just bought my 2010 Enclave yesterday I couldn't figure out how I would be able to change those spark plugs without moving the engine. Lol. Now I see to just move the intake manifold. Thank u.
Little3160 you're welcome 👍👍
Thank you Daniel for spark plug video. You are saving a lot of people a lot of money. Hope all is going good. Have a great day!
Thank you so much I was able to change mine watching your video
Your videos are great. I love the detail you go into. Thank you very much.
Just bought all the parts and will be doing this myself this weekend. '09 Enclave. Thank you!
You're welcome and good luck 💪💪
All went well, and no more stutter under load. Thanks again!
@@patrickskahill6530 About to do the same on the same year and make. How long did it take you?
I’m doing my wife’s ‘08 this weekend. I hope it goes good. I have changed struts on the front and rear, outer tie rods, and my breaks. Breaks are easy though. My local mechanic told me to change them myself so it would save me money.
Ditto! Just replacing one plug and coil
Thank you very much for doing this. I was able to change the plugs and gasket in my 2010 Chevy Traverse. This sure helped a lot and I appreciate you doing it. Saved me some $$$!!!
I guess Im asking the wrong place but does anyone know of a tool to log back into an instagram account?
I was dumb forgot the account password. I would appreciate any tips you can give me.
@Kayson Malakai instablaster =)
Thank you and I have confidence to do it with my 2009 Enclave I bought 6 months ago
Thanks guys! Great information! Made my job easier -09 Buick Enclave
you're welcome 😉
Yes thank u
Thank you Daniel. I appreciate you taking the time to make this video. I have to do this on my step daughters Enclave.
you're welcome :)
Daniel thank you so so much for putting out this detailed video. I was able to change spark plugs and ignition coil on my 2011 Buick enclave cxl with approx 134000 miles.
Daniel i would be more happy to talk to you over the phone or exchange email with you if you do not mind. It's hard to put some things in words for the grateful you have shown by putting out this and other video for this vehicle
Samuel Jani thank you for your comment and my email rescuemovingservices@gmail.com. 👍👍👍
Great video Daniel... Going to give it a go tomorrow... Feeling more confident after watching your video...!
Greg Simopoulos 👍👍
Thanx! Nicely done from start to finish.
Thank you Daniel for yet another great video.
thank you for your great words:)
thanks im going to attempt this july 11 2020 2009 buick enclave very doable great information
This is better than the other video.
Thank you so much I followed your video and it came out perfect
Says he not a pro but is using snap on and matco tools, great video
I was thinking the same thing when I saw the Snap-On torque wrench. Maybe he had a mechanic buddy overseeing him???? However, the spark plug socket was missing magnet or rubber boot to hold plug so maybe just borrowed the tools?
Thanks for the videos you make I owe you a beer or 2 if I ever see you 😀
Great job, you save alot money
Great video thank you. Shop wanted 475 to do this.
What were your Torque settings for intake and Throttle body. And thank you for your video. Very informative 👏
Thank you. Your video was so easy to follow.
Thanks for the video very detailed and informative. How much lbs to tighten the manifold?
Tha PrayZa I think 89 in-lbs
Great job. Thank You Will do same on 2011
Great video!! Great job!!!
Excellent. Thank you!
Fantastic video! Great job
What size rubber hose fits around the spark plug for screwing in? Does it matter how tight I screw them in? I don't have the strength of a man.
17:25 What type torque is that ?
Funciona para una 2014??
There’s no need to remove throttle body
Thanks !! Man
Also great video thanks
db d you're welcome 😁👍
When you put the new spark plus you recommend change the gasket to
Not necessarily
@@RescueMoversDFW tank you
Thanks for the video! Good info! Did you have any trouble reusing the intake gasket? Do you recommend a new gasket when changing the plugs?
Yes, definitely change the gasket and thank you for watching my video :)
This is the same as the buick lacrosse. Except the engines are mounted reverse of each other. So you can do the front 3(rear 3 on the enclave) easily
Buen video hermano, y muy útil. Saludos!
Sorry, i have questions about. What calibration do you have the spark plugs? Do you have to program the throttle body again after cleaning it?
.043 inch gap on the plugs. They came pre-gapped and he just checked them. I cleaned my 2012 Acadia throttle body and as I recall the check engine light came on for a few cycles and then never came back on. That was about 3 yrs and 15,000 miles ago.
Hey I replaced my spark plugs on my 2010 Buick enclave and now its showing 2 misfires and it wasnt showing no misfire before I replaced them. What should I do?
Make sure wires are connected correctly z you probably have them and the wrong position
Where are the fuel injectors from this motor?
Which is the number 3 cylinder
86l s on bolts??
I don't know if it's just GM or what, but they seem to make it harder for the Do-It-Yourself kind of mechanic to work on their vehicles. Spark plugs used to be out in the open. Now you have to take off the intake manifold? I was going to replace the fuel filter and transmission fluid filter, but I couldn't because the fuel filter is integrated with the fuel pump and the transmission filter is buried deep in the transmission and only replaced during a full service. Ridiculous. But thanks for posting the video!
ACHG11246 thank you for your comment and I agree with you with all this .
I agree! Thanks Daniel!
Yeah these companies know exactly what they are doing. They don’t want us fixing our own stuff. They want us to take it to the dealer. I feel sorry for mechanics that have to work on these modern vehicles. It is so expensive these days because of how long it takes to do stuff.
Oye, yo tengo una 2008 enclave, me sale el check en el tablero y me arroja el P0330 y P0430, como lo soluciono? y la puerta de la cajuela como que quiere abrir pero no, si se oye el ruidito que como que quiere abrir pero simplemten no la abre, manual si.
Thanks for the video mate! Is it necessary to replace the manifold gasket?
Which is bank 2,,,I got po302 code
Those 3 prongs on the top of the manifold are for the plastic cover.
Alex Bothwell that's correct
Es barato la mecánica deste buick enclave, me interesó comprar
No la recomiendo
how long did it take and how many miles were on the truck
Great video great information!
Thanks for the informativ vid!..
Can u list all the tools and grease u use.thanks
sorry, i can't remembered
Do you have to unplug the battery before doing any of this?
Hernan Sanchez , you don't have too. But it's on the recommended it
Is this the same for 2013 Buick Enclave?
What book is that?
Haynes Manuel
All mine where solid black. Whoever the original ower of the 09 Traverse I have (Same motor) never changed the plugs. Car has 138K on it.
thanx for the video!!
jd5179 you're welcome: )
What size hose?
Your speak plug socket should have a rubber boot inside to hold the spark plug as u pull it out
Do you know what needs to be fixed if my factory remote start will no longer work?
im sorry , i don't
U can youtube how to reset it. Its really easy. I found that it will not work if your chk engine light is on. If it was previously on this may be the reason for the need to reset.
Tatianna Wally that’s right on the check engine light. Mine came on and it wouldn’t work. Turned the light off and it started working again.
If you have a check engine light on it wont work till you fix the issue if you clear the codes it will work
Nice! Thanks!
you're welcome
Main thing is don’t cross thread the spark plug!!!!
Excelente video Daniel.cual es el cilindro 6?
mauricio Vazquez despues te digo cuando mire el manual que no me acuerdo
Daniel Rescue Movers ok
very good.
thank you!!
What side is bank 1 o2 sensor?
A homie where is the camshaft sensor located let me know as soon as possible please thank you.
sup homie here's the link taht shows wher's the camshaft sensor hopefully will work for you. Thanks
www.justanswer.com/buick/4w248-buick-enclave-cxl-replace-crankshaft-sensor.html
where is cylinder number 1?
Where did you find your manual?
Muchas gracias por el video 🤙🏻
Comprate un socket para bujias q sea magnetico y asi no pasa nada
Daniel I have the same vehicle what book did you go by name and where can I buy one great job?
Richard
San Antonio TX
Richard Longoria thanks for you comment, just go to AutoZone auto parts and ask them for the service manual for a 2010 buick enclave. I bought mine for I think $35dls. Good luck.
Next time explain that you need an extended 5/8 not just a 5/8 socket 🤦🏽♂️. Back to the store I go 😡
You know you don't have to take off none of that you can just fit your hands with an extension I do it all the time on mine Lol
Útil este vídeo
Your 5/8 speak plug socket should have a rubber boot inside it to hold it to come up. If not go buy a new one $5
Dont you need to disconnect the battery while doing this? Asking for a friend?
When working on any part of the engine definitely dealing with electrical connections it is always best and smart to unplug the negative connection on the battery better safe than sorry
Ouwee! Looks like alot of work 😨
armando mirelez it is a lot of work 😥😥😥
Lol where do you live
Dallas tx
I live in mesquite! How much would you charge to do my 2011 enclave? ☺
armando mirelez yo estoy en Lewisville hay diras
Lmmfao. All y'all who post vidz of doing plugs.
Y'all do to much work because you don't gotta remove anything but the evap purge valve. Them you can do plugs with no issue or removal of anything
979y
Where is ignition coil bank 2 on this engine?