Hellcat POWER with an SRT-8? HERE’S HOW!

Sdílet
Vložit
  • čas přidán 28. 11. 2023
  • #ford #chevrolet #hellcat #dodge #camarozl1 #chevy #chrysler300c #mustanggt #sleeper #trackhawk #srtaddicts #srt8

Komentáře • 109

  • @thatbaggedsrt
    @thatbaggedsrt Před 7 měsíci +40

    Everyone sleeps on the 6.1 and here you go doing it justice. Just doing the simple stuff such as a Legmaker CAI, Cam, Long Tube Headers, and a Tune will wake up that 6.1.

  • @IsThatGeneral
    @IsThatGeneral Před 7 měsíci +20

    The walls aren’t that thin dawg lol. Crankshaft is already forged from factory. Drop in pistons, rods with a good cam and a good boost setup and you can make 9-1000 wheel all day with a 6.1.

  • @Cumshot-millionare
    @Cumshot-millionare Před 7 měsíci +32

    6.1 and 5.7 are the v8 goats 🤘💯

    • @nodo7575
      @nodo7575 Před 7 měsíci +5

      Not even close.

  • @BlackStone11
    @BlackStone11 Před 7 měsíci +65

    Forget the 6.1 get a 5.7 and owners won’t have to worry about those thin ass walls

    • @redhunnid5142
      @redhunnid5142 Před 7 měsíci +9

      You can buy engine sleeves for thin cylinder walls and make the walls as thick as you want

    • @Jiggaboojoness
      @Jiggaboojoness Před 7 měsíci +23

      @@redhunnid5142basically just turns it back into a 5.7 at that point . Might as well start with the 5.7

    • @andyflow180
      @andyflow180 Před 7 měsíci +6

      Fucking love it here knowledge is awesome

    • @coliimusic
      @coliimusic Před 7 měsíci +3

      6.4 BGE block is just the better solution

    • @kerrybrucem.8967
      @kerrybrucem.8967 Před 7 měsíci +4

      ​@Jiggaboojoness Smh everybody isn't a real car guy. They think they know something because of CZcams but that doesn't make you a I know about engines guy.

  • @davidcoppedge9667
    @davidcoppedge9667 Před 4 měsíci +3

    6.1 hemi rods and pistons are perfectly fine... everything else spot on

  • @honeycombkole3185
    @honeycombkole3185 Před 7 měsíci +10

    I just got done playing NFS Carbon today with the 300c SRT-8 and you post THIS lol. how do you do it?

  • @jinsane731
    @jinsane731 Před 7 měsíci +1

    This information is better than great I've seen a lot of fails mentioned in this very video because they didn't do their research and just wanted to slap something together for the track and some didn't even make it up to the track or broke it during a meet run anyways as I said very useful information 🤔🚗💨

  • @gpatty6538
    @gpatty6538 Před 7 měsíci +5

    Sooo what I heard was get a 6.4 from a ram truck and convert over the front cover and accessories to BGE spec. I guarantee this is the cheapest way to get one of these under my hood.

  • @GloomToon
    @GloomToon Před 7 měsíci +37

    The only problem with that srt8 gen is the interior. Them shits look like it got a school bus steering wheel

  • @RellMonroe
    @RellMonroe Před 5 měsíci +9

    Has anyone ever fact checked this guy? I wanna believe him so bad

  • @isaacfamgloman7715
    @isaacfamgloman7715 Před 7 měsíci +1

    Why he spilling all the secrets to the dodge tricks 😂😂 heat as always though

  • @Whatguywhat
    @Whatguywhat Před 7 měsíci +2

    Remember there is replacement for displacement. Your engine block after your thin walls wear out combust and shoot a rod. Just boost it

  • @fgj8379
    @fgj8379 Před 7 měsíci +10

    And when you're done modding, don't forget that Glock insurance lol

    • @ExplorerST2023
      @ExplorerST2023 Před 7 měsíci

      We can't shoot car thieves in the states

    • @savagesoldier9627
      @savagesoldier9627 Před 7 měsíci +10

      @@ExplorerST2023 yes you can sir only one voice matters and it ain’t the dead one 😈

    • @shykesehart6217
      @shykesehart6217 Před 7 měsíci +2

      ​@@savagesoldier9627preach pastor preach

  • @sagethegodvk
    @sagethegodvk Před 7 měsíci +1

    Somebody said my boy out here doing the lords work 😂but can I get some tips on making hellcat power in a 2012 bmw 550 👀😅

  • @redhunnid5142
    @redhunnid5142 Před 7 měsíci +9

    You can buy engine sleeves for the thin cylinder walls and make the walls as thick as you want and get forged rods and pistons like recommended 💯

    • @Whatguywhat
      @Whatguywhat Před 7 měsíci

      Then your just reverting back to a lower displacement. Think before you speak

    • @jayknight139
      @jayknight139 Před 6 měsíci

      ​@@Whatguywhatisn't it worth it if you can now run way more power?

    • @Whatguywhat
      @Whatguywhat Před 6 měsíci

      @@jayknight139 no it isn't look up your local tune guy and see how much it is to sleeve the cylinders and change out the pistons and rods. Your better off buying a LS that's already sleeved and just switching the cam and getting a lighter car like what I got a Chevy Vega or a C10 or something lighter but not to light so it hooks good. Dodge engines are literally like third best you better off getting a coyote swap before you put a dodge engine to handle super boost

  • @texasboy410
    @texasboy410 Před 7 měsíci +16

    That’s all 🧢 about the 6.1. My stock 6.1 been procharged for 100K miles. Car has 190K on it now and still runs smooth. The 6.1 was one of the best engines until the 6.2 came out. The 6.4 is the weakest engine that Dodge made when it comes to adding power adders. I been part of the Hemi gang since 09 and none of these statements are fact.

    • @HennyManTactics
      @HennyManTactics Před 7 měsíci +2

      That’s just you and your tune what works for you might not work for others

    • @texasboy410
      @texasboy410 Před 7 měsíci +6

      @@HennyManTacticsthe statements are still false especially about the cylinder walls being weak. The 6.1 takes boost very well.

    • @HennyManTactics
      @HennyManTactics Před 7 měsíci

      @@texasboy410 they don’t you have to cut down rings and do oil pump work I have no clue what your talking about

    • @texasboy410
      @texasboy410 Před 7 měsíci +2

      @@HennyManTactics been running 10lbs for more than half of the 100K boosted miles on my 6.1. The only knowledge of the 6.1 over the years has been from used 6.1 owners and by that time, most weren’t taken care of. That’s the only reason people would say the 6.1 isn’t a good motor.

    • @HennyManTactics
      @HennyManTactics Před 7 měsíci +1

      @@texasboy410 100 pounds of boost…..okay

  • @smilysbable
    @smilysbable Před 7 měsíci

    I have a 2019 dodge 1320 so what can I do to that motor just want about 800hp rear wheel power!!!

  • @leonmccrae5124
    @leonmccrae5124 Před 7 měsíci +1

    Wow!!!! How do you know all this?!?!?!? 😮😮😮

  • @dubbled9685
    @dubbled9685 Před 7 měsíci +5

    Wait I thought the 6.1 has a forged steel crank and the 5.7 is different crank?

    • @mr.300c
      @mr.300c Před 7 měsíci +6

      Correct, 6.1L has a forged steel crankshaft. 300c SRT8 owner here 🙋🏿‍♂️😊

  • @BlockBoyz420
    @BlockBoyz420 Před 7 měsíci +1

    Can you make a video about this but with a 6.4 srt8

    • @cormaro13
      @cormaro13 Před 7 měsíci +1

      Can u learn how to use google for once in your life lol

  • @twang9735
    @twang9735 Před 7 měsíci

    Anybody did a price check for everything ?

  • @ExplorerST2023
    @ExplorerST2023 Před 7 měsíci +2

    How can i make my 2018 mustang gt nastier than a collard green hot pocket?

    • @GloomToon
      @GloomToon Před 7 měsíci +3

      Boost. Them coyotes love boost

  • @dustygoodz6557
    @dustygoodz6557 Před 7 měsíci +2

    Aint the 6.1 also known for lifter and cam problems
    ?

  • @user-qc3mg3pp2s
    @user-qc3mg3pp2s Před 7 měsíci +1

    Yeah you can buy 9k worth of parts and hope for the best, or just buy s crate SC 6.2 .

  • @amirr3024
    @amirr3024 Před 2 měsíci +1

    the 6.1s do have forged crank… the 5.7 its cast iron💀, you did say good things but also a bit of false info (6.1 owner as well)

  • @syfyreekgaming1518
    @syfyreekgaming1518 Před 7 měsíci

    I want to know about the triton

  • @hezekiahamen8335
    @hezekiahamen8335 Před 7 měsíci

    Add boost to the scat?
    A turbo?

  • @alansoler2653
    @alansoler2653 Před 7 měsíci

    OMG I have a 2006 300c SRT8 thank you so much for making this video!!

    • @cormaro13
      @cormaro13 Před 7 měsíci

      😂 it’ll still be slow just stop

    • @deandrepollard3050
      @deandrepollard3050 Před 7 měsíci

      ​@@cormaro13stop hating

    • @sleepytimeshecomes
      @sleepytimeshecomes Před 2 měsíci

      @@cormaro13 says the guy with the camaro

    • @cormaro13
      @cormaro13 Před 2 měsíci

      @@sleepytimeshecomes already got rid of that slow thing and got a new mustang , what’s up slow par lol

    • @MarcoTopG
      @MarcoTopG Před 7 dny +1

      @@cormaro13my tuned s4 will gapped you no problem😂😂 and from rolls😂

  • @DoublePML
    @DoublePML Před 3 měsíci

    Now wait a min cause the 2014 charger have a 6.4liter stock

  • @sc.rappi88savage.street.kn60

    Bruh hold ur mic still 😂... Sound like u driving down a bumpy road

  • @keithsmith9889
    @keithsmith9889 Před 7 měsíci

    The 300's are so fucking comfortable. And that 2.7 is junk you can get them with bad motors dirt cheap.

  • @user-lc7pt2ms8e
    @user-lc7pt2ms8e Před 7 měsíci +2

    I don't know why dodge make the best V8 engines like the 6.1L hemi👍🏾or the supercharger💪🏽💪🏽...but of all the car community blackcarguru that leads me to one question...what the hell is dodge doing with the fake ass Apple iPhone battery bullsh*t dodge charger 2 door..man I hate electric cars😞

    • @savagesoldier9627
      @savagesoldier9627 Před 7 měsíci +1

      I feel you sir all the electric cars being made are trash and everything is so stupid expensive

  • @DodgeChargerPursuit
    @DodgeChargerPursuit Před 7 měsíci

    No mention of the hellcat limited slip differential. Amateur

  • @TheT5beast
    @TheT5beast Před 7 měsíci

    Pretty sure the first part of this video is wrong ..

  • @300Grizzly_Srt
    @300Grizzly_Srt Před 17 dny

    Y’all better stop sleeping on bro, @theblackcarguru be knowing what talking about. 🤙🏽💯🫡