Pedal Electric How to diagnose repair on error 8 on AWDII

On this video I’m showing how to diagnose error 8 on AWDII.
This process will determine if you need a replacement motor or a controller. When this process is success and the front motor works, it means a rear motor replacement need it. When it doesn’t work this way, it means it needs a new controller.

[@mohamedmachine8886]

Good job. How many people provide false information without knowledge or experience. They waste time for people to earn dollars. Thank you for that valuable information.

[@globoyym9678]

Legend I have a different e bike I just unplugged the connector then turned on for it to show error 8 then plugged connector back in and it worked appreciate you bro

[@michaelvasquez4267]

Hi there I’m looking for a little information. I changed out the inner tube in the rear tire due to a flat. After unplugging replacing the tube then plugging it back in I now have an error code. The hub was working perfectly fine before unplugging. How do I resolve this issue?

[@pedalelectrictutorialsbyag1721]

check if there is a burn in the rear motor connector (black spot on the connections). If so, depending what side of the connector is burn needs to be replace.

[@Mondo-productions]

Hi Im working with the PRO model and disconnected the rear motor and it is still giving me error 08 message, so im guessing the rear motor isn’t causing the issue? What would be the next step in this case

[@johnyang6551]

So, if it is the motor, then what? I did this and my front seems to work fine. However, when i rode it only in front wheel drive, it was laboring at a higher speed and was having difficulty going up a tiny hill. What next?

[@pedalelectrictutorialsbyag1721]

Replace the rear motor is the next step.