Ram 2500 Aux Upfitter Switches For LED Lighting
Vložit
- čas přidán 3. 08. 2020
- What’s up everybody? Today’s video is about how you can use the Ram AUX UPFITTER switches to control your custom lighting or any other commercial equipment that needs a power switch. If you are interested in the soder shrink sleeves or mini torch used in the video, I’ve posted the links where you can find them on Amazon.
Kuject 120PCS Solder Seal Wire... www.amazon.com/dp/B073RMRCC3?...
GOLDNCONN Mini Jet Pencil Flame 503 Torch Butane Gas Fuel Welding Soldering Lighter (BLACK) www.amazon.com/dp/B06Y2J74T8/...
Feel free to visit my Amazon storefront for other recommended products. www.amazon.com/shop/dieselleg...
Please like and share this video as it truly helps me out. Also, leave a comment and let me know how I am doing or if you have any questions? If you like what you see, please subscribe to the channel as I am always posting videos on a variety of content. Click that notification bell as well so that you will always know when a new video drops.
Follow me on Instagram @Diesel_Harm & @diesellegiance
To show further support for the channel, please visit www.diesellegiance.net and pick up a t-shirt, hat, decal, flag, etc. Your support is greatly appreciated.
My Truck:
2016 Ram 2500 Crew Cab 6.7
8” McGaughy’s Lift
3” Body Lift
Fox 2.0 Shocks
Rims TIS 544BM 24x14-76
Tires Atturo Trail Blade Boss 40x14.5
EFI Tuned
FloPro 5” Straight Pipe
AFE Cold Air Intake
Ram Air Hood
Bushwacker Max Coverage Fender Flares
Spyder Headlights
Pedal Commander
RBP Extended Stealth Running Boards
Tyger TriFold Tonneau Cover
JamHandle
RGBW LED Rocklights
RGBW LED Wheel Lights
Sponsors:
Custom Offsets - Ambassador
OneUpLighting - Use Code “HARM10”
The Beard Struggle - Use Code “HARM15”
JamHandle - Use Code “HARM10”
FCKLightbars- Use Code “HARM15”
LocallyHated - Use Code “HARM15”
FanPole - Use Code “Harm10”
Pedal Commander - Use Code “PC20” with link www.pedalcommander.com/?rfsn=...
#Ram2500 #Diesel #Cummins #TurboDiesel #DieselPower #DieselLife #DirtyDiesels #Ramtrucks #Liftedtrucks #Mcgaughy’s #CumminsNation #RamTruckNation #CumminsMafia #Truckporn #CustomTrucks #Mopar #Trucks #6.7 #12wides #14wides #40’s #TIS #Atturo #RamAir #PittsburghTruckScene #TruckStuff #TheSkyNetTeam #CustomOffsets #LocallyHatedtrucks - Zábava
Cant believe how well you explained everything. Im not afraid to do it now at all..👍
I wasn’t expecting the fittings to be cool and then boom those are bad ass. Thanks for the tip.
WOW!
I have hide-away strobes for plowing I've been dredging to install because I didn't have a clue how to wire the Aux switches. It is so simple. Thanks for the video, I'll install them tomorrow!
Thanks for the straight up informative video. Not a bit of useless information in it. Very refreshing. Supposed to be getting my RAM in April so this is immensely useful. 👍🏻
Thanks 🙏
Life made simpler. Thank for showing how simple this is.
That is the best video I have ever watched explaining and showing how to do anything! Great job. The 2500 I just bought has these. I am pumped now. Thanks
Thanks, I try to create content that is entertaining but also helpful.
Great video! Got right to the point without all the stupidity that many add. Stayed on topic and very informative and showed us how to do it and where to get the stuff you like. I’m now subscribed!
I actually enjoyed listening to you go through your hook up, I have a 4500 and I want to put lights in my tool boxes and your video helped a lot , thank you
Thank you 🙏
Another good idea to light up the tool boxes. I have a cab and chassis too. I wanted to put a work light to light up my flatbed and might as well do my under mount boxes while I am at it.
Thank you for this awesome video and those cool Kuject solder fittings!!
That was exactly what I wanted to know. Awesome! Thanks!
Super straight forward and simple video. Appreciate it!
Thank you 🙏
Fantastic video, Thank you for taking time explaining and making it look simple 😀 Have a Blessed day
No problem, glad I can help.
Just what I was looking for.... Thank You!
I love those solder fittings. (Time stamp 7:40) What I like to do when I use them is to get a piece of shrink tube and will slide it over the wire before I put the solder fittings together. After I've completed splicing the two wire together with the heat-shrink fittings, I then slide the piece of regular heat-shrink tubing over the new joint and apply the heat to shrink the tubing over the joint. This looks much cleaner than using electrical tape and it is much easier to apply than trying to wrap the electric tape around the new joint.
Good video! My 2022 Ram came with them, and I was wondering what I would do with them. Also helped me understand what all the wires that came with my truck do lol
Love this video, new to 2018 RAM 5500 (I am a Ford Guy) I now can do my own up fitter switches. Thanks
That’s awesome 👊🏼
I was always a Ford diesel guy but once I went to my first Cummins in 2001 I have never looked back. Especially after all of Ford's problems with the 6.0 and 6.4's. No thanks.......
Super helpful video thanks man
Nice job on vid, very informative!
Great instructions given for Aux Switches, better than the Dodge site gives, great job.....
Thanks 🙏 I try to put out not just entertaining content but useful content when I can.
Thanks Brotha! Great Video!!! That is definitely easy!
This was awesome thanks man!
Great "how to" man. Thank you!
Awesome video man thank you! Very helpful!
Very helpful vid thanks!
Great video thanks!
Great info, Thanks!
Awesome video, thank you
Great job Sir…
We'll be getting a Dodge truck let this summer, early fall to tow a 5th wheel. Wasn't sure about the upfitter switches if I wanted them or not. Now I do so I can wire "passing" lights to my trailers running lights. Old school they call em ICC lights. Also want to rig back up lights to the trailer, so I can hit those when I need em..
Yes, get the aux switches they will make your life easier.
The manufacturer of the "Solder/ Shrink" fittings say to NOT use a flame to set them, they require a heat gun to do that. We use these shrink fittings at the boat shop and only use the heat gun. The flame will degrade the outside jacket and actually melt it. In addition, I personally use a secondary heat shrink tube over everything to give it a professional looking connection then cover it with a jacket all the to where it would go through the fire wall to give it a "Factory looking" wire harness. Also right next to the relay/ fuse location is a ground connection point that is a better location for a ground connection as it has no paint there....
great video
Last state is only if the switch is set to Ignition, then it will retain the last position used (ON or OFF) even after the ignition has been shut off. Again awesome video, thank you!!!
I know im asking randomly but does anyone know a trick to log back into an Instagram account..?
I stupidly forgot my password. I would love any help you can offer me.
@Anthony Deandre instablaster :)
@Zakai Benson i really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now.
Takes quite some time so I will reply here later with my results.
@Zakai Benson it did the trick and I finally got access to my account again. Im so happy!
Thank you so much you really help me out!
@Anthony Deandre no problem :)
Bro this video is EXACTLY what I needed. So glad that I found it.. I just subbed you and gonna order the connectors using your link are you an Amazon affiliate?? Keep them rolling brother.
Thanks Brother! You made this simple, short and direct to the point. Very informative and well done. Now it's time for some upgrades / ??? on my 2018 Ram 3500 crew cab 4x4 cab and chassis flatbed. I just hope I can find my wire packages but have a good idea where I put them. Thanks again!
Ahh...thanks for the reply man!
There may have been a better way to wire it but I had all my other custom lights wired to the same spot so I just wired in a relay and kept them all together for convenience. Thanks for asking though 👊🏼
Thanks bro for the video! I appreciate it
You have a link for those rock lights by chance?
I liked the video and the suggested solder fittings and soldering tool. What tires are you running? I like them and drive in snow often.
My tires are Toyo Open Country 40x15.5
I am getting ready to install fog lights in Aux3 do I need to use a relay and an in-line fuse for the lights?
Typically the aux switches have a fuse and relay in the box under the hood. You should not need to add any unless the old ones are bad.
I have a 2021 1500 Warlock and was wondering if these would fit. It is very similar to the 2019 Rebel.
Not sure. The aux switches I have were an “add on” package from the dealership.
Hey does your bumper have a wrap. I have the same truck with chrome bumpers but would love to get rid of the chrome.
No, my 2016 Ram has aftermarket oem replacement painted bumpers. My 2018 Ram had chrome bumpers but I had them professionally painted. They sandblasted them, primed with an epoxy, then base coats and then clear coated.
Question. Would it matter if each light were grounded to the vehicle SEPARATELY or alternatively how about if both grounds (one from each light) were connected together and then ground to a single point? Would the differences determine series or parallel? Please explain. TYSM
I’m my experience, all lights can be grounded to the same ground as long as you have a good ground. I don’t know if it makes any significant difference running them all separate or not.
Bro, how big is your garage homie. I can’t get my 8” lift in the garage anymore and you have a body lift as well... Truck is looking good homie.. 👍🏼💯🔥
My garage door is 8’ High.
If your wiring requires an inline fuse, is it labeled in the fuse box for 1-5 auxiliary to add a fuse? How big of a fuse can you run on it?
Yes, the aux switch housing has fuses inside in different sizes. Just figure out which size fuse you need and switch the fuses around or replace them as needed.
@@DieselLegiance thanks man, solid video. 🤘
So you just run the device power to the upfitter pigtail? No relays or nothing? Thanks for the vid man!
Yes, the Upfitter box already has fuses and relays built in.
Appreciated your video very informative. Quick question where did you get the wiring for the upfitters?
The wiring came with the Upfitter package with my truck. If you already have the switches and plug but no wires, check online or call your local parts dealer and they can get them.
I basically have the same truck but a 3500 is one of there switches ment for like strobe lights
Could be. Upfitter switches can be wired in to anything. If you have a 3500, it’s possible the shrines were wired into the Upfitter box under the hood.
Do you know the part number for that panel i need to swap mine out for it?
I don’t, sorry. You may have to go to the dealership to have them look it up.
What is the part number for the wires to the AUX box under hood?
I’m not sure. I just went to the Ram dealer yesterday and they couldn’t help me. I want to add it to my other Ram so I’ll have to find a kit aftermarket.
What's why are you wiring your fog lights to your AUX switch? Is the factory switch bad?
This was a tradesman model that didn’t come with fog lights. I had to add them.
What brand are ur interior LED's that u put on Aux 3?
I think my interior rock lights are from OneUpLighting but can’t remember 100%
Is there a reason not to use negative on the battery for ground?
Not at all, I thought about running a ground block from the battery to the cab for all of my wiring but I have not got around to it. I just wanted to keep as little wires around the battery and hot engine as possible which is why I grounded at the corner of the frame. Sometimes I ground to the frame underneath if it’s a shorter run and easier depending on the situation such as my power steps. Either way is fine. If you do ground to the frame, just sand the area to make sure it’s clean bare metal.
I have a 14 3500 I don’t have juice to the upfit housing on firewall the interior switch lights turn on but nothing at the firewall housing any idea
Maybe a bad wire connection going to the Upfitter fuse box under the hood? Maybe the relays or fuses are bad?
Randy did you get a solution?
@@EdSchellhase thanks for checking in!! not yet I’m guessing I need to take the truck to dealer to program they couldn’t tell me if that is the issue some folks aren’t great at there job! I’ve already had it there once it cost me $180 for the trailer brake controller sounds like it’s going to cost another $180 are you familiar with the spark programmer?
I bought my ram 5500 with strobes already installed. Looks like Aux 1 button is wired to them. But for some reason they won’t come on. I set it up on the dash for battery and ignition. Tried both, still nothing. Any ideas why? All 5 Aux button are lit.
I’d Check the fuse in the box under the hood? If still good, check the ground wire? If good, check to make sure the positive wire from the lights are plugged into the right number on the aux harness under the hood just in case. If still not working, just find the wires from the lights and look for any bad connections. If all wires look good and lights still don’t work, maybe take it to a shop to look at.
@@DieselLegiance thanks. Great video. Simple and straight to the point. Great info.
Where did you get the wire kit for those Aux switches?
They came with the truck from factory but I’m sure you can find these wire end connectors online and make sure own.
Do you have a link for the uplifter switch package you got?
I don’t as my truck came with it from factory. You may need to contact the dealer for a kit if needed?
@@DieselLegiance thanks boss man
With a light bar would you need to wire in the relay or how’s that work?
No, the auxiliary switches that come as an option for the ram already have fuses and relays in the box under the front hood.
@@DieselLegiance wow that’s easy thanks i just got a 15 with these switches and I wanna put a light bar on it so that would work perfect
Is it difficult...has anyone tried to remove the Ram wire from the upfitter block after having "clicked" it in or is it stuck in there permanently?
It’s removable. You need to unplug the harness and stick a tiny flat head screwdriver in the harness and unlock the lever and then pull the pins out.
Hey, does it matter which color pigtail to use?
No, it does not. The colors are for your own records to keep track.
Where did you get the wiring?
It came with my truck as a package. You can probably call a dealer and order it or if you can find the metal clip/ends, you can make your own.
Ill see if I can get one from a salvage yard RAM.
Yeah that’s my plan too as my other Ram does not have the Upfitter package. I did find a company that makes them but they were out of stock.
Can they be removed after if I decide to sell my truck and take off the accessories? Also what kind of tuner is that I have the same truck ?
Yes, you can unplug the wires from the main harness. However, it’s probably a little harder to disassemble the whole assembly to remove to reinstall in a different truck. Also, I have an EFI tune.
@@DieselLegiance yea I was hoping just being able to take out the wires if I decided to sell my beast but it’s not happening anytime soon . Just bought some lasfit pods and have a custom bumper. My old shop did and extremely crappy job putting my light bar on and they put the switch right by my knees as get out of the truck. Great videos watched all of them. Seems we have lots in common. Where are you from.
That’s cool. If no reason to sell, just keep it and keep modding it. I’m from Mount Pleasant Pennsylvania.
@@DieselLegiance that’s awesome man I go to pa a lot for hunting, I live about 2 hrs from Gettysburg pa. I’m from Leesburg va.
That’s cool. We like to visit Gettysburg especially bike week and I travel a lot to Charlottesville VA as my daughter goes to college at UVA.
How do l get my 4 digit code?
Try 0000 as that’s normally the factory code. If that don’t work you may have to have the dealership reset the code?
A proper gas-tight butt-splice crimp and shrink tube is far superior to soldering. Soldering weakens the joint.
I have 6 auxiliary switches not 5
Why not just buy the ends and crimpers for the upfitter plugs so you have no spice joint at all? Much cleaner than a bunch of electrical tape connectors. Also do yourself a favor and put your wires in plastic loom for protection and appearance.
As for last state I'm guessing that didn't work because you selected battery. If you selected ignition the device would be controlled by the ignition and if they were on when the ignition was switched off they'll come back on when you restart. With battery they'll stay on until you shut them off which is probably not what you want for interior lights as you could run down your battery.
I do use the upfitter ends at the box under the hood. I have used wire loom since this video. I am just always changing things up and sometimes don’t have the loom on hand at the time of filming.
@@DieselLegiance by ends I was suggesting buying the pins and putting them directly on the wire you are connecting so you don't have to have a splice joint from one wire to another.
I did not know they had longer leads? The ones I have from the dealership are a metal connector that plugs in but has a splice end as the leads are only about 6” long?
@@caseypries7559 where can I buy what you are talking about
@@JuanHernandez-ce8rb if you scroll up you'll see a link I posted to waytek wire. I posted this 3 months ago and I don't remember all the details. I do remember they are harder to find than they should be.
Great video thanks!
Thanks 👊🏼