How To: Bosch/Thermador/Gaggenau Outer Door Panel 00478778
Vložit
- čas přidán 4. 02. 2018
- How To Replace: Bosch/Thermador/Gaggenau Outer Door Panel 00478778 www.appliancepartspros.com/bos...
Symptoms: corroded, badly scratched or bent.
Tools: Torx 20 screwdriver, tape.
This Bosch/Thermador/Gaggenau made Dishwasher Outer Door Panel replaces the following older part numbers on Bosch, Thermador, Gaggenau Dishwashers: 1384450, 475229, 478778.
Buy the new Dishwasher Outer Door Panel 00478778 here: www.appliancepartspros.com/bos...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - Jak na to + styl
I had to take out 9 screws from my front door assembly to get the panel off, I had the pocket type door, and there were 3 hidden screws in the recessed pull handle. I nearly bent the door trying to figure out how it was still stuck. Mine was a 2014 Model 500 series SHPM65W55N. Appreciated the other video on replacing a cracked Bosch Water Inlet valve.
Our videos are just to help give a general idea on how to do the repair. It may not be for your exact model model, but it should help to guide you.
Thanks for all your videos. I saved a few hundred dollars ordering the part through you guys and watching these videos!
Very helpful when the spacers fell out, thanks.
Thanks for this! I needed to open the door to dry the insulation because someone put Dawn in or left too much on a pan (The stuff is WAY too concentrated for a dishwasher) which caused it to massively foam up, leak out of the dishwasher and soaked into the insulation (and floor) to boot. I couldn't figure out what the things were at 1:11 as both fell out when I took off the door panel to get at the insulation. But when you showed they were spacers, it was just a matter of me figuring where the ones on our model snap on. Once I did the rest went smooth!
Thanks , We got a fender bender in our door cover and have to replace it .
Can you show me how to do that with a Miele G4977 SCviSF?
Is there a part number to purchase the spacers seen at 1:25? We have a broken one :(
Hei , i am having a big problem with plastic spacer :( because of that i cannot fix the door . So my question is : why it is so important that plastic spacer ?! without that i can fix the door but with it is no chance :( . Thank you in advance for your help .
Please give a close up of how the plastic spacer is supposed to go back in.
DId you figure it out? I'm trying to put it back together now... :)
@@mira9052 No I didn't. The bottom projects out more than it should . My keyboard has a gremlin.
@@mira9052 at 1:25, you can see how it's supposed to be positioned I think?
How do you take out Crome handle
5
A power socket that close to the water valve? Really?
need to remove the ad strip at the bottom of the screen that blocks what I need to see
There's usually an "X" at the upper right when you hover over an ad to close it. If not, use Ublock Origin.