I used a Enticer 2 with the 409/410 engine in the past, 19748 before kilometers on it before was finally dead because the chasis and tunnel broke from very hard use it could been welded and repaired. Always used Yamalub. Great little sled. I wish they still made them. If I could purchase another I would have it. If they were new product line again I would probaly buy two. The only changes I would make to that original platform would be a modern more agressive track (similar to what is currently in the tundra 550 137 inch track) and a put big metal yamaha bravo style front bumper. Long live the mini VK540. The utilmate trappers sled in my humble opinion.
I had one of these when I was a kid, the stock track is junk, but it looks like they changed the track to a 1" 1/4 maybe? The front arms on the suspension gets worn and makes the skis sloppy. You can drill out the hole and put bigger bolts in there. Other than that it's a awesome machine!
One issue on the ET410II to watch for is the wiring harness that runs under the engine(Under the y-pipe),it will rub on the motor mount and short out over time.Other then that its pretty much bulletproof.Plastic skis(Extra wide,removes 10lbs off the nose)),grease fittings on all the rear skid links,and deeper lug track are must have upgrades.Keep up the good work.
Hey Jack Frost. I ordered the ski stuff per your list. Should be getting them next week. Wish me luck. Any clue the deepest lug you can fit on the track that won't rub on our machines? Thanks
love it that you get excited by these old sleds even after your new sleds.
Working on a 81 panther myself, so much fun having a machine that responds to love!
Love the Show! and the vintage sleds , working on a 1981 7500 blizzard now. Let It Snow
Gotta love vintage sleds! I have an 89 AC El Tigre. hopefully I get to ride it this year. last year we didn't have a winter in upstate NY.
I love this machine. I have a '92 with 32000km's. This is the perfect hunt camp ice fishing machine.
Lavin Gunn I've got twin nuvik 340's
Great km's. Always good to hear about high mileage sleds
I used a Enticer 2 with the 409/410 engine in the past, 19748 before kilometers on it before was finally dead because the chasis and tunnel broke from very hard use it could been welded and repaired. Always used Yamalub. Great little sled. I wish they still made them. If I could purchase another I would have it. If they were new product line again I would probaly buy two. The only changes I would make to that original platform would be a modern more agressive track (similar to what is currently in the tundra 550 137 inch track) and a put big metal yamaha bravo style front bumper. Long live the mini VK540. The utilmate trappers sled in my humble opinion.
Great km's
I grew up on a bravo long track. Just bought a 1997 enticer 2! Gonna be such a nice upgrade!
Thats a great sled
Those ET2s are great wood pullers. Cheers :-)
Just bought an Enticer 400 Trapper. Got rooked though. Needs a piston, but will still do 50 km/h across the lake on one low cylinder
I have the same skidoo there perfect goin across mish to get wood
I had one of these when I was a kid, the stock track is junk, but it looks like they changed the track to a 1" 1/4 maybe? The front arms on the suspension gets worn and makes the skis sloppy. You can drill out the hole and put bigger bolts in there. Other than that it's a awesome machine!
I have a 95 things been to hell and back needs a new engine now after 15 years of solid riding. built like a tank too
you have a special ability to attract older unique sleds
I have two of them And a skandic The yamaha's are by far the most reliable work sleds and weigh near nothing.
What should I let my sled warm up too before riding and what temp before shutting it off
Nice. Have fun my friend. We are supose to have our first storm on the East coast this weekend.... YES!!!
yveskc1 where are u from? I'm in southern maine and have only seen flurries
Bailey Lauzon i am from New-Brunswick.
cool my brother lives there Joe Forgette
yveskc1 ohh im at quebec
You should build a groomer or drag for your pulling behind your snowmobiles on the trails
I have the same sled I just cleaned the carb and I noticed both low jets have rubber plugs blocking them? Is yours the same way?
I have the SAME one exactly
loui you should buy a 1995 polaris indy 500 its and amazing sled and I would love to be able to see what you could do with it
Still green down here in lower MI
Just snowed 3 ft here in London Ontario
ohh thats power
The carb on that sled looks almost the same as the one on my ovation 340, and the motor sounds very similar.
pretty sure Yamaha just bored out the 340 to get the 410cc engine.
We need some cold and frost!
Can i use that engine to put on a lawn mower? Will this engine run during summer?
damn i just love enticers xD
One issue on the ET410II to watch for is the wiring harness that runs under the engine(Under the y-pipe),it will rub on the motor mount and short out over time.Other then that its pretty much bulletproof.Plastic skis(Extra wide,removes 10lbs off the nose)),grease fittings on all the rear skid links,and deeper lug track are must have upgrades.Keep up the good work.
Jack Frost have you replaced the front skis? With what kind? I'm thinking of changing mine
Jason Naughton Heres my thread on TY www.totallyamaha.net/forums/showthread.php/95050-New-2014-VK540IV-blown-plastic-skis-on-EnticerII410
Awesome man! Thanks!
Hey Jack Frost. I ordered the ski stuff per your list. Should be getting them next week. Wish me luck. Any clue the deepest lug you can fit on the track that won't rub on our machines? Thanks
Need a little more snow in ny still ugh it better hurry up
440 and better suspension next?
I need snow in this part of Ontario
same carb on my 91 ovation 340
what year is that skidoo
Surprised the 540 wont fit looks pretty much the same as far as plastics.
I want a sled but idh any land and my parents won't let me:/
very nice sled.i really.like yammys that sled.looks good how much?
what year is this skidoo
still waiting hoping for snow here in new Hampshire
Jam Songs I'm in New Hampshire to I'm in Nottingham where are you
im in New Hampshire as well (charlestown) cant wait for snow!
Jam Songs same bro
Zander Morin I'm in Lebanon
Snow can come anytime.. Vermont here
That engine looks similar to my old version Yamaha exciter II engine
410cc
hey would any one know the best place to get used or decent priced windshield for one of these?
Enticer 2 mines a 1996
No idea!
filmed today with the fog in ottawa eh
Don't skip the lapel mic next time
Where's the artic cat
360 club
lol, for the break idk
where were you there is not any snow in my part of Ontario
Jester he lives 2 hours away from the Ontario Quebec border I think
Tyler Tomashowski I live in a little town called Lindsay Ontario so I guess he has more snow
He's from the Ottawa area
nilesable I know
I was typing to Tyler,he thought Louis lived 2 hours away from the On./Quebec boarder.
sounds like a tripple
im 4th to comment nice sled bud
69
Biggest piece of garabage my dad ever owned burning through spark plugs left and right rebuild engine every year don’t buy this machine anyone
hmm, thats strange