Video není dostupné.
Omlouváme se.
Line 6 Helix Floor open surgery and diagnostics to repair joystick issue.
Vložit
- čas přidán 31. 12. 2021
- A "AT YOUR OWN RISK" video to show you how to open and fix the Line 6 Helix Floor unit to address the joystick.
Disclaimer!! Do not attempt this at home. Send to line 6 for repair.
This is the most innovative realistic sounding modeling guitar rig in a compact floor unit. Now everyone is copying it!.
Great video! Direct, to the point, and loaded with informational nuggets! Thx
I need volume knob repair
Nice to finally see how that is done!!! Thanks for sharing!
It'd be great if you could do a video on cleaning or out right replacing the footswitches.
I can't replace my Helix with a new one any more but 2 of the footswitches are bugging out and the tap tempo switch is starting to show signs of its demise so I would really appreciate it if I could see a video on it.
Thank you very much.
Can anyone tell if the power supply has a fuse?
There was a short circuit on stage.
Now it doesn't work anymore
The problem I’m having is the preset button - it scrolls left and right but pushing it does nothing. Any advice? Thanks in advance!
There are 4 wires mentioned in this video. One of them does just that. It seems the signal when pushing down. Try the controls test in this video. It will show you in red what does not work.
@@GlenHyden Hello Glenn, thanks for your video how to disassemble. My preset button do also not work anymore when pushing down. Therefore I can not access into menu for control test UI function. 🤔
Do you know how to fix the plastic part of the scribble strip. The lcd looks fine but the plastic over it is bent in. Im thinking of trying to take the top half of the chassis off and bend the plastic back into place. Dont know how to do that tho
I do not. Yamaha may have the board in stock? It's on a series of ribbon cables.
Hi Glen, i would like to know if you ever heard that helix stuck on ui mcu firmware updating screen. My LT now has occur that screen stuck thing, i have search & read some threads on line6 community and 2 of the thread says that maybe a cable loose or board displacement, do you have any idea about that? Thank you
czcams.com/video/Mu0XeUPusqU/video.html
Hi, I have a helix floor with this problem: it loses the input signal, the signal goes in fits and starts, the symbol on the input display flashes red, then it starts working again for a while, sometimes it works for hours and then repeats the problem. Lately it also crashes, meaning the large display turns off and all the small displays start flashing. What could it be? I was thinking about the power supply, thanks for any response
Sounds like a bug crash. What version? Maybe back date the version.
Where can you find replacement screws for this unit?
Digikey
This is invaluable. How long did the job take?. Mine has this fault but its hardly used.
First time 35 min. Second time 20.
@@GlenHyden thats not too bad, not sure I have a balls for it though, if it turned not to be the wires, could i get a switch easy enough
Hi thanks for the video..all the upper switch foot FS 1 To FS 6 on my helix floor don't work.
Sometimes when I turn them on they work and switch for about 5 minutes but after that they don't switch ... Only with the preset knob... Can you please help me?
Run the test shown in the video. If it passes fs1 - 6 then it's software. If it fails then it goes back to line6.
Thank you for your answer and help! Do u mean that if it fails should I take it to line 6 factory? Thanks
@@camilaymaddieshow932 yes. If the problem is NOT software, send it in.
@@GlenHyden thank you and what if it's the software? What recommend me to do?
@@camilaymaddieshow932 backup and factory reset.
I have some issues... I have helix when I put power supply cable helix is slow vibration... plz help me
Call support. This is out of scope for me.
Great video! Did you see a fuse in there somewhere? My Helix just died on me after 6 years of serving me well.
I did not.
Mine also just died, no power at all, did you fix yours? still scratching my head
@@steventhompsonlivetoplaylive i gave mine to an electronic repair man, hope he can help me, have not heard anything from him yet..
@@Johannore was there a smell of burt capacitor? I would guess that is what it is. The supply section gave up.
@@GlenHyden i'm not shure. I was not at home when it happened.
Could you do it without the card removal?
No
@@GlenHyden thank you gotta replace my phone's pot.
lol. good video!
I wanted to show the fun part. It is a pain.
My joystick cannot scroll😢 it can pushed down and press left right up down..do you have solution??
Solder it back on. One of the four leads has been disconnected.
@@GlenHyden is that it? So i dont have to buy the new joystick?
@@yugi_ibnu Wait till after you re solder to buy anything. Did you run the test in my video?
@@GlenHyden yeah i already run test..and when i rotate the joystick its still turn red🥲
@@GlenHydenhey man i already fixed the joystick problem..but now my expression pedal not accurate..it cannot start/stop at level 0…do you have solution please😢