Should have flushed the brake system instead of just bleeding it, consider you have plenty of new brake fluid. I usually pump the old fluid out while refilling it during the pumping until the fluid is out clean. That’s how a manual flush is done.
I like your video as your detail tips and repaired so I own 2015 Nissan rouge S and i get oil change to go dealer and he want change brake fluid as service schedule in maintenance 30k @ $137. When i watching them from window i didn’t see them to remove any tire or bleed the line so what do you think dealer did scheme with me? What do you think does 2015 Nissan rouge S need break fluid replacement to remove tire and bleed or not? Because if Brake fluid replace, then they have clean or flush or bleed line to remove old fluid. As honest mechanic what is your advice or think on that dealer job?
Thanks for the video!! Quick question my brake pedal seems to get hard and I can’t pump it no more when the car is off does the car have to be on ? Or pump it while it’s hard ?
For a front wheel drive car, you move front tires straight backward and the rear tires will cross forward to the front.
Unless you have directional tread tires
Should have flushed the brake system instead of just bleeding it, consider you have plenty of new brake fluid. I usually pump the old fluid out while refilling it during the pumping until the fluid is out clean. That’s how a manual flush is done.
Thank yo so much!
I like your video as your detail tips and repaired so I own 2015 Nissan rouge S and i get oil change to go dealer and he want change brake fluid as service schedule in maintenance 30k @ $137. When i watching them from window i didn’t see them to remove any tire or bleed the line so what do you think dealer did scheme with me? What do you think does 2015 Nissan rouge S need break fluid replacement to remove tire and bleed or not? Because if Brake fluid replace, then they have clean or flush or bleed line to remove old fluid. As honest mechanic what is your advice or think on that dealer job?
Thanks for the video!! Quick question my brake pedal seems to get hard and I can’t pump it no more when the car is off does the car have to be on ? Or pump it while it’s hard ?
What size clear vinyl tubing did you use?
What size wrench do you use and what’s the hose diameter
You should never run the master cylinder dry, otherwise you’ll allow air into the system
Rotate your tires in accordance to what the factory manual specifies.
always cross the tires while changing. always
*pump the next load in* I dead...
What size hose did you use for the calipers?
3/8