If financing is an issue, check this out! Otherwise, give us a call so we can help you through printing without a conveyor! 💚 www.screenprinting.com/pages/screen-print-equipment-financing
Congratulations on your videos I'm always following and learning a lot from them. But I wonder if you have any representative of your paints here in Brazil, preferably in the state of Sao Paulo. Thank you.
Great video; really appreciate it! Is the water based ink supposed to go all the way to the other side of the t shirt? If it is going all the way through; what am I doing wrong?
Hi! As a general statement, the ink is not meant to penetrate the shirt like that. If it is, there are 2 main things to look at. 1) Too much pressure / to many print strokes pushing the ink through. 2) mesh count is too low and there is a LOT of ink going through. There are other variables - but check on those above and let us know if it fixed it!
Why did Ryonet introduce the R2O water based pigment, is it better or does it have advantages over the Green Galaxy Water based pigments, are you planning to phase out green galaxy inks ?
If your starting out screen printing and think you'll be wanting to print with both water based ink and Plastisol inks, would a single good forced air flash be good for both kinds of ink or would you need two different kinds of flash ( forced air and non forced air. )?
@Jonathan Rivas-Rodriguez Good question! that'll depend on the environment you're in and what mesh you are printing on. Higher mesh counts offer more surface area for ink to dry on. If you are in a dryer climate any amount of time is too long. hope that helps some!
ive been printing with comet white on black 100% cotton shirts but im always getting super light opacity on the first stroke I have to probably do 3-4 passes flashing after each one to get a good solid coverage, any tips on printing white on dark shirts
Hellp what ink do you recommend for surface can not go on the oven like those non woven bags bcuz i use watet base ink but dry to fast in the screen . But my costumer is looking to print 500 bags or more
Use warp drive in our water based inks and only dry to the touch. You will achieve a full cure in 48 hours. You can find warp drive here: www.screenprinting.com/search?keywords=warp%20drive
It will be the same process as reclaiming your screens. However, it will take a little bit more elbow grease as your screens are tougher... We also suggest making sure you are using a pressure washer as this helps a lot.
hola muy interesantes sus videos pero la verdad no entiedo mucho lo que dicen, me gustaria si fuera posible que subtitularan sus videos por favor seria de mucha ayuda para mi y de seguro para mucha gente hispana.. gracias (Y)
Haz lo posible por enterlo si lo escuchas una y otra vez lograras entender;ademas te apasionara aprender como hacerlo en realidad es muy facil solo requiere practica.
I love watching your videos. nobody explains the process better than you. and I've watched a lot of videos.
+Shaunte Elise Thank you for watching! It's always so good to hear that the videos are helpful!
Some do,gotta follow the right people. Others are new at it trying to fake it till they make it
I can’t wait to own a conveyor dryer to try this
If financing is an issue, check this out! Otherwise, give us a call so we can help you through printing without a conveyor! 💚
www.screenprinting.com/pages/screen-print-equipment-financing
Congratulations on your videos I'm always following and learning a lot from them. But I wonder if you have any representative of your paints here in Brazil, preferably in the state of Sao Paulo.
Thank you.
Ryonet how difficult is it to get into screen printing for someone that has no experience in it at all? is it an easy profession/ please reply to me.
hey ryan could you do a updated video on printing poster's! thanks
Great video; really appreciate it! Is the water based ink supposed to go all the way to the other side of the t shirt? If it is going all the way through; what am I doing wrong?
Hi! As a general statement, the ink is not meant to penetrate the shirt like that. If it is, there are 2 main things to look at. 1) Too much pressure / to many print strokes pushing the ink through. 2) mesh count is too low and there is a LOT of ink going through.
There are other variables - but check on those above and let us know if it fixed it!
Which ink is long lasting for cotton t shirt
Water based ink or -plastisol ?
Hi, If you do wet on wet does the ink from the other colors stick to the back of the new screens?
Would Green Galaxy Neptune Blue show well on a yellow 100% cotton shirt?
It definitely would :) Darks on Light colors generally do very well.
Why did Ryonet introduce the R2O water based pigment, is it better or does it have advantages over the Green Galaxy Water based pigments, are you planning to phase out green galaxy inks ?
R2O was the ink we carried before Green Galaxy, and they are discontinued. Green Galaxy is the only water based for us :)
Very informative! Thanks!
If your starting out screen printing and think you'll be wanting to print with both water based ink and Plastisol inks, would a single good forced air flash be good for both kinds of ink or would you need two different kinds of flash ( forced air and non forced air. )?
Hey there! Just the one forced air flash would work great for you!
Quartz flash you can melt tshirts(usually sports gray n some heathering materials)n black ink on polyester shirts so beware
which flash dryer is that?
What is considered to long for an open mesh?
@Jonathan Rivas-Rodriguez Good question! that'll depend on the environment you're in and what mesh you are printing on. Higher mesh counts offer more surface area for ink to dry on. If you are in a dryer climate any amount of time is too long. hope that helps some!
ive been printing with comet white on black 100% cotton shirts but im always getting super light opacity on the first stroke I have to probably do 3-4 passes flashing after each one to get a good solid coverage, any tips on printing white on dark shirts
Hey there! Check out this link about screen printing comet white onto a black shirt!
czcams.com/video/M7KWyAnxX-s/video.html
Hellp what ink do you recommend for surface can not go on the oven like those non woven bags bcuz i use watet base ink but dry to fast in the screen . But my costumer is looking to print 500 bags or more
Use warp drive in our water based inks and only dry to the touch. You will achieve a full cure in 48 hours. You can find warp drive here: www.screenprinting.com/search?keywords=warp%20drive
How do I reclaim my screen if it’s hardened ?
It will be the same process as reclaiming your screens. However, it will take a little bit more elbow grease as your screens are tougher... We also suggest making sure you are using a pressure washer as this helps a lot.
how come your poster kit is not sold internationally on your site but is sold on amazon?
EZ Graffiti www.screenprinting.com/silk-screen-printing-kits-packages/home-silk-screen-starter-kits/diy-gig-poster-screen-printing-kit.html
Try this link www.screenprinting.co.uk/product-category/kits/kits-packages/kits-packages-starter/
hola muy interesantes sus videos pero la verdad no entiedo mucho lo que dicen, me gustaria si fuera posible que subtitularan sus videos por favor seria de mucha ayuda para mi y de seguro para mucha gente hispana.. gracias (Y)
Haz lo posible por enterlo si lo escuchas una y otra vez lograras entender;ademas te apasionara aprender como hacerlo en realidad es muy facil solo requiere practica.
Esta compania vende kits de inicio para principiantes, no se necesita una maquina.
Eat some pizza Ryan
I was just on your website, wanting to buy some inks, but your shipping is $20, so i guess i will not be trying these inks!
20 inch long ... Ryan ? :)