HUB Motor Required Maintenance - Ancheer AKA Eshion Cyclamatic Electric Bicycle 4K
Vložit
- čas přidán 25. 03. 2017
- Link to the $599 Ancheer - amzn.to/2CNdtaq (last price check 03/30/2020)
Link to the NEW $749 MODEL (500 watt) Ancheer - amzn.to/2x8OfBY
this one has Double battery Double motor
Other modes made by other brands and prices links below
Link to Kemanner $599 - amzn.to/2wIVMnK
Link to Merax $599 - amzn.to/2Py7uZc
Link to Unbrand $629 - amzn.to/2oG40sg - Auta a dopravní prostředky
Great channel! Keep the vids coming and thank you!
Thank you for watching
Thanks good video. I have bad sound in my motor too when I go upphill so I think I take it apart and do a service with greas (with the right one). You can notice that you know when there is a service to be done because the motor is not that strong anymore and it takes more energy.
Ancheer has a youtube channel on here called "Ancheer sport" showing various videos on repairs and replacement as well as full assembly on various models.
@slipinn Thanks, I didn't know Ancheer had that youtube channel and now I have subscribed.
Cool that you made this Videos about the Motor, i saved some, if i got a Problem i know what to watch :D
Nice to see they come apart fairly easy.. yes grease is good but not too much .. oh and if you want to get rid of the out-of-balance wheels either remove the reflector or add a second reflector opposite side to balance it out. :-)
A "zerk" fitting is a grease port that works with a grease gun.
Makes total sense, thanks for the easy fix with out the $$ or time.
It worked well for me
I would use a bike like that mainly on flat ground. They did not put a disconnect on that motor "cringe" That will suck when it really needs parts or replacing. You are a handy guy build your next ebike.
Great video my man.
Thanks
Wow nice video! Thanks
Well done, very helpful, thank you...
Hey RoManiac- You've got to get a spoke wrench and do something about the spoke tension in that rear wheel. I can tell just by looking that those spokes are becoming WAY too loose. Maybe take it to a bike shop and have it looked at if you aren't good at wheel work.
You right, the motor hub gears need to be lubricated reguraly, and by the way the gears are replacable, i just replaced mine from aliexpress website, and ebay have them too, because the clutch just stock, but the problem is you need to buy the right size gears by measuring diameters of the gear assembly, by using special diameter tool measurment to get accurate numbers or you can use regular measurment tabe like i did but it is a hight probability to ge the wrong size small.or biger.
Silicone Grease for the nylon cogs. Dont use lithium or grease for metals. The grease nipple is a great idea and expect to see it on top end hubs soon.
Thank goodness it's so easy
Can't wait to change hub motor on my fat tyre ebike, been looking at it for past 3wks, sayin I'll do it soon 😂 well weather bliss in London UK n it's fat tyre ebike time 💋💯👍🥳🇬🇧👍
Excellent
nice to see other people has a tennis ball on a string in their garage!
i put a hub motor on my trike. When i start it from a dead stop i always help it to get going by pedaling. This is some thing I learned riding a pedal assist only bike.
Supposedly this takes some of the strain off the motor and may increase the life of the motor. I was recommended to do this with my electric bike and now have ridden it for 8 years. My meter shows over 19,000 miles on it, but I'm doubting it as police speed trap shows my speed at about 4mph below my indicated speed. Really not sure which is correct.
Amazing.
Do you get this shake on your wheel when the motor spins? I heard GEARED motors always have that but i couldnt see it on your video. If so, how do you COUNTER that?
After how many miles did you need to do this?
very helpful tks
If they make a hole there wont the greece comeout from their?
What about water going in their and rusting?
thanks,maybe a non petroleum based lubricant for the gears
I really like your channel, please I have a e fat bike but I’m having a problem with it. The problem I’m having with it is that, it’s use to STOP and then repeat again when I’m driving. Sometimes it move 30 m/h to 00:00 m/h please can you help me to solve the problem?
Thanks for the info but my gears blew up I'm gonna take my bike apart see if I can save my e-bike only road bike for six months
Thank you for this video - anyone found a seller for replacement nylon planetary gears? I know the mid drive gears "8-Fun Bafang T36" are readily available on ebay, but not sure if they would be the same? Anyone can shed some light on this thank you.
thanks for this video i have the wheel off and was just putting off buying a flywheel puller turns out its all one unit... lol fml
You have to open it to grease it?
Thanks for sharing dude
hi, i hope you can also do instructional on how to remove and replace the sealed bearings, coz i feel some play on the motor hub wheel.
I already sold that bike and got another one, if it will happen I sure will make a video
I know you said the motor was making noise and I think it's new bike, so what makes you think it needed more grease than what was there from the factory? I know grease is good but to much is bad. Can't tell from the video if those holes behind the gears are open to the windings but if so, slinging excess grease thru them would not be good. As long as they are sealed from each other (windings/gears) seems like something I'll be keeping an eye on. I just got the same bike and you assembly video was a great help and time saver. The supplied instructions are pretty useless
Wild Bill i have 3 Green Light Cycle Urban Ryder 26" bikes. their not bad, all bikes have well over 3000km and only one battery has crapped out and one motor but the motor is possibly fixable.. use them daily in the summer time and even thru most days of the salty Canadian winters. overall decent bike but company is terrible when it comes to parts and standing behind warranty. they told me battery could be fixed in 8 months its been a year since i sent it to them lol only maintaince ive ever done or do is test the battery and clean the terminals.. that noise thats this bike makes when u give it gas at a stand still makes me cringe.. thats happened to me twice or three times in the entire life of my bike and everytime i hear it, i cringe and let off the gas. Usually only happened in the trails at a slow spot where i was trying to use all motor to get up a small hill instead of helping it along by peddling either way not a good sound and potentially a manufacturing mistake if your bike is brand new and makes this noise.
you are worrying me dblock2626 as I am just about to buy an Urban Ryder myself. Are you having issues with warranty service or getting out of warranty parts like the battery?
Stephane L. Yes. I have been waiting for a replacement battery since March 2016. Still nothing yet. They are good bikes but the company and the people that work for them are a joke... I order my parts on Google. JUST HAPPY they still work. Alot of servicing needed to keep bike it good shape. FORKS gotta stay clean, chain greased, tires filled (it's a bitch when they pop), error codes,.. still better then alot of ebikes out there but they owe it to China. Maybe I'll do a review video one day of the 3 bikes I got and the shape they are in after years of use
6 year old video and who knows if you'll evr see this but...is there any way i can replace those gears? because mine are destroyed. i had no idea they needed grease and they've been worn basically flat. >_< you said you didn't know in video but maybe you've got some info now?
can you use chain lube o nthe gears? mine makes an odd noise when givin electric power, it started in the middle of a ride with slight rain
Gresie it's a must needs to be thick, oil will just come out
Ummm, doesn't that grinding and lack of power at the end of the video indicate a problem. I have two of these (brand new) and this just started on one of them. It will spin the wheel but there is no power (I can grab the wheel and hold it). Any thoughts? Thx
Did you solve this problem? I know someone with what sounds like the same problem.
Thanks for the video. I'm trying to find the exact hub motor's name and model. Can you tell me the exact serial number written on your hub motor? I got the ancheer 20 inch folding bike with disk brakes (bike model : AM001908). My hub is labeled : CZJB01-36V20" 171001512 . I think the hub motor is made by the "Changzhou Jiabo Machinery Manufacturing Co., Ltd." I'd like to upgrade my 36V 15amp generic controller to a 48 volt one (id also upgrade battery to 48V obviously) so I can gain RPM and top speed. So I'm trying to figure out if the hub can take 360Watts of power without too much heat. Whats the label number on on you hub ? I'm trying to figure for exact specs (max watts, volts... gear reduction ratio, etc) and potential need for spare pieces etc in the future..
Does anyone know what size wrench is need to disassemble it thank you
There's a common problem with these ...clicking sound coming from inside.....In my case the magnets are Ok and are in place...and the gears are now greased....and still clicking....so it's a problem...and I dont' feel like taking the motor apart..and don't have a machine shop in my apartment.....ideally i'd love to just buy a new motor and splice it in from the wire....cut and spice...red to red white to white etc. .There's a video someplace but shows a huge amount of work replacing the motor - taking apart the whole controller box....no thx lol
Does the hub motor have a brand name on it? Wondering if I can buy the same motor but 500w instead of 250 and just swap it out?
Yes you can swap it out but you need to get the electronics with itx not just the motor
Watts V x. Ah 250 to 500 same
i just bought a new bike Ancheer on ebay for 485.00 dollars. what type of grease do you use for the motor? the batteries cost half the price of the bike! you can't unplug the wire when take the wheel off?
You can unplug it but you gave to take the controller box off,
I have a E Bike with a similar motor from Bafang. I use silicone grease because it has no oil in the grease which can absorb and pollute the rest of the motor. Also silicone grease is not aggressive to plastic.
I think the white grease originally in the motor is something similar, but no standard grease made of mineral oil.
Try unhooking the cable
Have you had your rear wheel become acentric?
The motor on my new ancheer folding ebike went bad.
Is there a replacement anywhere?
On the motor it says 26" 36V17101400 H
Will any other motor fit?
Ebay you can buy the hub.. Or the entire wheel
Unfortunately not for this particular ebike (aloy rims).
..I decided to repair the motor by myself. It´s easy, only the copper windings have to be replaced. 75 meters of insulated 0.6mm wire. 5x5 meters for each of the 3 phases.
@@shapeshifter8986 that sounds like a great video
Does anyone know where to find the little pin magnet that goes between the clutch (planetary gears)????
Online. There is a name for them
Make sure you get the dimensions right for the new one
Hi, what type of "lithium grease" did you use?
teflon or white grease for bike not oil
oil: outside especially for the bicycle chain
and grease for inside like mechanics rotation
I use for 25 kg e-bike single speed 500w 48v LITHIUM TF2 40G grease
and Weldtite TF2 Teflon Grease Tube.
Out of curiosity, do you remember how many teeth the white parts had please?
For reference if anyone would like to know, when I opened it up, mine was 36 teeth nylon gear
How often can you put the grease on the motor?
As often as you want
Can you make it go any faster?
Yes
My hub motor gears are worn where can I buy them any idea ?
Never had to search for part, but if there is a place to have them, is ebay
Can you believe they didn't bother to put a detach for the motor's power cable? Unfreaking believable. That's actually why I'm here, trying to figure out how to swap a god damn inner tube. You mean just to swap an inner tube I'm going to have to take the god damn motor out!? Otherwise I have to open the power controller box and divorce the wire in there... This is OUTRAGEOUS.
All you have to do is loosen the motor wire from the frame and then take the wheel off by removing the 2 nuts.. The wire will still be attached but u can still change the inner tube.
@@Netdinex - That's bullshit, the 2 times I did that, the tire exploded on the way home from the gas station where I went to use the compressor pump. I clipped the wires and added my own quick disconnect in the form of microphone plugs, problem solved.
Just unplug the two wires from the controller!!!
Lmao you can't be serious
Bigger battery more amps and watts. 36 x10=360
hello i got one last year but now i loosing power and turning off when i use it can you help me ?
Loosing power, that is not good, does it just die? I don't know man, you need to have somebody that knows electronics look at it
Possibly a cell in the battery pack going bad. Had this happen with my first battery(36v 10Ah). Replaced it with 36v9AH and used it for about 6 years. With diminishing mileage, replaced it with 36v20AH. Changing AH does not affect motor but does change mileage.
I had that happen to me 4 months ago on my Cyclomatic bike" the other inexpensive amazon ebike" where I had the battery display keep turning off while riding. I fixed it by taking the battery off and spreading the connectors to make a better contact with the battery base. After that I no longer had problems till this day. (knock on wood...)
Where is that accent from if you don't mind....Not a hater I just am fascinated by accents ...My guess is near Poland?
Romanian
@@vegasromaniac My guess was only 500 miles away or so.
I thought Romaniac was short for ROMANTIC LOL :)
@@jaymercha3859 haha, many thought that also
A grease hole in the hub would let dirt and water into those gears. You don't want that
just put a screw plug in the hole or a grease nipple
FatHead970 put a tape over it
I WAS THINKING A HOLE, THREAD TAPPING THEN PLACING A ZERK FITTING. YES, HOWEVER, I WOUDN'T THINK OPENINGS TO WINDINGS GETTING FLOODED WITH GREASE WOULD VERY GOOD AT ALL UNLESS A DAM COULD BE CREATED TO KEEP GREASES OUT OF WINDINGS. THOSE HOLES? MAYBE ALSO NEED GOOD CLEARANCE TO HELP COOL THE WINDINGS!
Don't think it's recommended to use lithium grease on those gears..
In that little drive you took at the end, it still didn't sound good to me.
i discovered later on that the bike just needed to get some bolts tighten up , was a bit loose , it was the bike that rattled
I'd upgrade to metal gears !
Where are you from? English second language?
Yep, living in Vegas from Romania, aka Vegas RoManiac
I think it is a seized sealed bearing. But idk. Wierd.
Wow cheap and bad design that power cable does not come apart for service. Good video though thumbs up.
Cheap design for sure
Seal the hub and try gear oil. Just enough so it circulates around.
It's an ancheer,they're a piece of junk, you'd be better off unscrewing the screws on the controller box and unplugging the wiring harness
What kind of sensors are in the motor of this e-bike?
??