Bought Inpa Software Bundle + Cable from Ebay, showing its main functions. Please use it with care, it`s a powerful tool and permanent damage may occur to your car.
you probably dont care at all but does anyone know of a way to get back into an Instagram account?? I stupidly lost the password. I would appreciate any assistance you can offer me!
@Preston Dominik thanks for your reply. I found the site thru google and Im trying it out now. I see it takes a while so I will reply here later with my results.
Cause I feel difference on l checked previously on inpa option rough idle it gives me these 6 cylinders but couldn't understand what does it mean or what recommended so I hope we know correct value In the mean time I'll see if it stay on green area thanks for your help
do you learn how to read coils I don't know it's fluctuating and I got my rpm low about 500-600 and only on traffic light I feel that and when I pull spark plug it's just 25k on it its look black not oily it seem too rich I don't know why ? I bought another spark plugs and same low idle no vacum leak cleaned idle valve cleaned throttle body , disa valve is ok also how shall I know by inpa the injectors are working right is it possible ?
Don`t know if I can help you, but in the LU Option at 6:05 you can see how each individual cylinder is being fed by the injectors. It should stay inside the green bars, otherwise that cylinder is running rich. Mine apparently fixed itself after this video.
Fred Rodrigues ok I'll check it on that way and by the way what's normal idle Is it 750 cause I get around 500-600 all times what about airmass what's normal reading is it 15 kg on inpa ?
@@fredgust84 BS, LU means LaufUnruhe. Just the percentage of how smooth each cylinder is. 0% would be no fluctuation in smoothness. Please don't use software you don't know how to use. So much misinformation in this video/the comments.
Looks like intake VANOS regulating position at idle. Reference position was 127 at start but now target and actual position is 118 Normally other engines start regulating phase at mid RPMs under load.
I'm told there is no 'all' english version (despite all the CZcams videos). Something that night help. Find all of the INPA.ini files in the various programs. Open the file and where it says VARIANT enter ENGLISH.MET. Where it says LANGUAGE enter ENGLISCH. YES make sure it has the 'C' in it. Then save that file. I think there are more than one. They are in the CFGDAT folder and SGDAT folder. There may be more.
do you have the website to know if i can buy online the same bundle software + cables maybe old and new cable i have experience with inpa, edebias and gt1 bmw sofware
Apparently it has fixed itself, I haven`t done anything new and its not like that anymore, however theres always a cylinder that keeps "working" more than the others, I`ll keep you updated.
"Explained" in the title is clearly a language barrier, still every little bit helps for a beginner like me. Thx
Thanks man, sorry I couldn`t help you further.
you probably dont care at all but does anyone know of a way to get back into an Instagram account??
I stupidly lost the password. I would appreciate any assistance you can offer me!
@Sebastian Angelo Instablaster :)
@Preston Dominik thanks for your reply. I found the site thru google and Im trying it out now.
I see it takes a while so I will reply here later with my results.
@Preston Dominik it did the trick and I now got access to my account again. I'm so happy:D
Thank you so much, you really help me out :D
Cause I feel difference on l checked previously on inpa option rough idle it gives me these 6 cylinders but couldn't understand what does it mean or what recommended so I hope we know correct value
In the mean time I'll see if it stay on green area thanks for your help
It would be nice to mention if you have facelift version with OBD2 only or prefacelift version with OBD2 and OBD1
Mine is 530i, all 530is are facelifts. hope it helps
do you learn how to read coils I don't know it's fluctuating and I got my rpm low about 500-600 and only on traffic light I feel that and when I pull spark plug it's just 25k on it its look black not oily it seem too rich I don't know why ? I bought another spark plugs and same low idle no vacum leak cleaned idle valve cleaned throttle body , disa valve is ok also how shall I know by inpa the injectors are working right is it possible ?
Don`t know if I can help you, but in the LU Option at 6:05 you can see how each individual cylinder is being fed by the injectors. It should stay inside the green bars, otherwise that cylinder is running rich. Mine apparently fixed itself after this video.
Fred Rodrigues ok I'll check it on that way and by the way what's normal idle Is it 750 cause I get around 500-600 all times what about airmass what's normal reading is it 15 kg on inpa ?
@@fredgust84 BS, LU means LaufUnruhe.
Just the percentage of how smooth each cylinder is. 0% would be no fluctuation in smoothness.
Please don't use software you don't know how to use.
So much misinformation in this video/the comments.
Looks like intake VANOS regulating position at idle. Reference position was 127 at start but now target and actual position is 118
Normally other engines start regulating phase at mid RPMs under load.
what a powerful software
I have Inpa too, but there isn't position " Coding"... I do not know why. Can you tell me how to fix it?? I would be very grateful:)
i have the coding menu but when i press f3 i get error messages, it could not read out the info
Where did you find inpa all english version?
I'm told there is no 'all' english version (despite all the CZcams videos). Something that night help. Find all of the INPA.ini files in the various programs. Open the file and where it says VARIANT enter ENGLISH.MET. Where it says LANGUAGE enter ENGLISCH. YES make sure it has the 'C' in it. Then save that file. I think there are more than one. They are in the CFGDAT folder and SGDAT folder. There may be more.
hello can i have the inpa software download link for windows 7 How much does it cost
You can find it here : www.bimmergeeks.net/downloads
how to identify if my lambda does not work?
are you using 19pin connector or the other connector located near steering wheel?
I`m using the OBD connector that goes under the dash, near the steering wheel. Only on older E39s,
Fred Rodrigues which interface are you using please?
I bought an Inpa software bundle + Cables on ebay, USB to OBD
do you have the website to know if i can buy online the same bundle software + cables maybe old and new cable i have experience with inpa, edebias and gt1 bmw sofware
hello i have 7.09 and there isnt a e39 option does someone know what to do
Hi, at the Chassis selection screen you need to hold shift and press F9. Give it a try
Haha all functions explained..dont know what this does, dont know what that means.... You should say, fucking around in inpa...
You solved the problem of the third cylinder correction? if so how?
Apparently it has fixed itself, I haven`t done anything new and its not like that anymore, however theres always a cylinder that keeps "working" more than the others, I`ll keep you updated.
+Fred Rodrigues thank you)))
Hi, is it possible to check fuel pressure on inpa?
Yes
@@duc696monster6 how????
Can inpa disable bulb check?
No. Inpa is best for checking. To change features I recommend BMW Scanner 1.4. Muche easier to use and can disbale all bulb checks.
"I'll just push this, I don't know what it does pmsl
+Lee F Lol, thats just readable parameters, you can`t overwrite anything.
Wow, pretty rough engine there....
nope, smooth as silk, car rides clean and throw no codes
(n) operator
What ?