DIY Tape Dispenser // (Ep. 62)
Vložit
- čas přidán 22. 08. 2024
- This video is a response to the much asked question: "How did you make that awesome tape dispenser?!" The spalted fiddle back maple tape dispenser seen at the beginning of this video has been seen in a few other videos so it was time to make a couple more for the other tape widths I have lying around. I made the two in this video from some scrap figured maple and padauk among a few other things like cherry, teak, plywood, used saw blades, and 1/4" copper pipe. This was the perfect opportunity to use some of the things that would have just been tossed out.
This design is not my own, though. It was inspired from the tape dispenser I found in an issue of WOOD Magazine. You can find that article from searching "tape dispenser" at the magazine's website and purchase the plans there. But if you are handy this video is all you need.
Check out my website at spunjinworks.com/
Please, Subscribe! It's Free!
Follow me on Instagram / seanrubino
Check out The Dusty Life podcast thedustylife.com and get yourself a T-Shirt or Hoodie.
Get a SpunjinWorks T-shirt at spunjinworks.com/
Soundtrack:
"Energy" by Bensound.com
Follow me on:
Twitter / seanrubino
Instagram / seanrubino
Periscope: Sean Rubino (@seanrubino)
Snapchat: Sean Rubino
Beme: spunjin
This video is a response to the much asked question: "How did you make that awesome tape dispenser?!" The spalted fiddle back maple tape dispenser seen at the beginning of this video has been seen in a few other videos so it was time to make a couple more for the other tape widths I have lying around. I made the two in this video from some scrap figured maple and padauk among a few other things like cherry, teak, plywood, used saw blades, and 1/4" copper pipe. This was the perfect opportunity to use some of the things that would have just been tossed out.
This design is not my own, though. It was inspired from the tape dispenser I found in an issue of WOOD Magazine. You can find that article from searching "tape dispenser" at the magazine's website and purchase the plans there. But if you are handy this video is all you need.
Very sweet! love the look!
+Wood By Wright thanks, James!
Excellent.
+Phil Smith thanks, Phil!
Excellent...
Cheers...
+Adam Quincey thank you, Adam!
Great idea well done!!!!!
+Dessert Man thank you!
I love that idea Sean
+Warren Downes - One Wood thanks, Warren!
love it, a beautiful object in place of something thats typically meant to fade into the background. great job!
+Keith Decent thanks, Keith! You nailed it. Thats exactly the idea I was going for.
Those turned out amazing! 🤘 New sub! Found you via Wood By Wright. 👍 Thanks for sharing!
+Heath Knuckles thanks, James is a good man.
Sean Rubino Yes he is! 👍
very nice!!!!😃
+Nikos Karavas thank you!
Thanks! It's great to see someone make even the mundane things in the shop look beautiful. I'll definitely borrow that idea but maybe twist it a bit...
+Anders Olausson thank you and please do. There are all sorts of directions this thing could go.
Nicely done 👍👍👍👍👍
+Bob Lee's Woodshop thank you, Bob!
Very fancy indeed.
Thanks, Arthur!
Very nice Sean !!
+The ShavingWood Workshop thanks, Tommy!
Those look great! 🤓👍🏼
+Live Free and DIY thank you!
Looks great, functions well. Those are great.
+Jim Dockrell thanks, Jim!
Cool idea I will have to make some
Thanks, Douglas!
I've never seen tape be so cool. Great job!
+Bruce A. Ulrich thanks, Bruce! My next trick is to make glue cool.
I think you have your work cut out for you on that one! ha ha
+Bruce A. Ulrich I'm coming up with nothing.
Wow Sean! Them some Extra Fancy tape dispensers. Great Job!
+TechEdFireman thanks! They were fun to make again. I have an idea for the next one if I need to make another.
These came out pretty sweet.
+Freddy Roman thanks, Freddy! A couple things, I love your work and thanks for subscribing!
Wow, those look great. Especially the spalted one in the middle. Nice idea!
+ManhattanWoodProject thank you!
great design and love the clean look! nice edit as well Sean!
+Vintage Wood Workshop thank you!
AWESOME!!! Those are great Sean, I gotta make one like that. Nice work.
+BearKat Wood thanks, I can picture yours all carved up.
Quite possibly the fanciest tape dispensers I've ever seen! Cool project Sean
+Paul Meyette thanks, Paul!
Those are awesome! Great job Sean!
+Mike DeRegnaucourt thanks, Mike!
Beautiful work, Sean! Great way to make use out of those small pieces none of us can seem to part with too.
+Braxton Wirthlin thanks, Braxton! Yeah that was another reason to make the dispensers. I had some scraps that needed to go. It didn't make too much of a dent but it helped and it gave some tape rolls a home.
Man, that is fancy!
+donny carter ha ha, thanks, Donny!
nice work Sean. those dispensers look almost too good to use everyday.
+Opa's Workshop thanks, Opa!
Very cool project and an awesome edit, paced really nicely and music selection was on point!
Thanks, Nate! I felt pretty good about the soundtrack selection too. I considered just having the shop sounds and a slightly longer video but after watching it over and over it didn't feel right. I then decided to go with a faster paced video and I found that track which was complimentary I felt.
Those are fricking beautiful!
Thanks for sharing :-)
+heriberthuber54 thank you and thanks for watching!
Great looking tape dispensers , I made a few for the shop and found out once I switched tape rolls they wouldn't fit the disc that holds them . I got the new roll to fit by removing a wrap of the inner core . I'm not sure but perhaps each manufacture has a different size inner core , something to keep in mind if anyone wants to make one like this .
+Jerry Sateriale thanks, thats a good observation. If the rolls are too small for the plywood discs you can always make another disc too. They are really simple and quick to make.
Really fine, I am gooing to copy your proyect
+Cajón de Sastre please do. Make a few of them for all the sizes you have.
Really nice work on those Tape Dispensers, the wood came out really nice.
A new Subscriber Now.
Barry (ENG)
+Barry Roberts thank you, Barry! Enjoy the show.
nice! I'm usually too lazy to make my homemade shop tools look that good..I'd hang them on a 3 inch screw in the wall...thanks for the inspiration to do a job well done on even the little things. also, love the podcast, you guys are great!
+I Think I'll Make It thanks and thanks for listening to The Dusty Life!
cool
+Miter Mike's Woodshop 👊🏼 thanks, Mike!
How did you make that awesome tape dispenser????
+Matt Lane ha ha. Very funny, Matt!
What kind of stars are in these wars? Is it some reality show with d list celebrities?
They all were in 1976 except for Alec Guinness.
what tyle of burl is the middle one? that's awesome looking
+Joe basementwoodworking thanks, Joe! It is spalted fiddleback big leaf maple from Washington.
Sean Rubino mr. Fancy Pants over there LOL just kidding!:) that stuff is awesome I'm guessing you can only get it in Washington?
To be honest I've never heard of it until now.. looks awesome!!
+Joe basementwoodworking well it is big leaf maple so where ever that stuff grows you can get it. Washington just happens to be where this stuff came from.
Nice build quality but the design is not practical as there is no opening to grab tape on a subsequent dispense. Looks nice though.
Thanks. It’s for show and organization really.
Did you oil the inside of them? I know you did, but you just didn't show it. Right? :)
+Howard Springsteen of course I did. The finish was just a spray on poly after the wipe on Danish oil cured.
Wow man, hella creative! But where are the hairpin legs and epoxy (turquoise dyed of course)? Jk! New subscriber and listener!
Thanks! And thanks for subscribing and listening to the pod!