Hey Jon I've just tried infinity wax turbo 6 sealant and I've found it brilliant , applied with da then buff off , it gave the car super gloss and beads like a hell and seems too staying strong after a month , give it a try 👍
I'd love to try dodo juice iron gloss. It doesn't get talked about or shown at all on CZcams, other than a couple little bits here and there. If the buff is nice on it seems it could hit all your points, just need to get through my cheap products before I go buying more. They also do 100ml sample bottles, which if it does last 12 months like they claim (or even 8-9) the bottle will last ages
One polish that does that are the NSP from Dr. BEASLEY'S and it's normal because the polish basically acts as velcro where it will be looking/acting like grabby for a coating. It doesn't require an IPA and just you can coat over it, the coating will be looking great and not like foggy as the NSP does. It's just the nature of the polishing cream but its noticeable on dark colors doing that.
John the Polish Angel Famous wax (ironic name cause nobody talks about it haha) I applied 1 coat on my golf and the results were amazing. Wipe on wait 20 minutes wipe off kinda like the q2 wax the buff was good. I buffed earlier around the 10-15 minute mark and the buff was grabby. However the 20 minute one was a dream. Performance even though it says up to 12 months I've seen some degradation on my first month in the lower panels ( the car was deep cleaned and polished ).
One more thing i applied some w6 black on the b pilars and my experience was amazing with it. 5 mintes to cure and the buff was surprising after watching you experience with it. It buffed like a dream and the smell is great.
the only 2 sealants that I can think on that meet the criteria are turtle wax graphine to the max wax or megs hyrbid ceramic liquid wax i think can keep up with bh dsw. The buff on these 2 is amazing, even outside in direct sunlight. Now an interesting question springs to my mind ... can you put a spray way on a machine?
I was going to buy this after we spoke the other day when i asked what’s on the BMW, but it’s seems to much buffing, arms will fall off 😂 think fusso maybe better or the ultra lock
No it's not lol. Did a car with it this week. If it's bedding down it's usually a technique issue. Too much compound and older spent compound on pad can bed down in patch on the panel. Shake bottle properly fir a minute. Clean switch pads and use less m8. I've experienced this but it's solved by technique.
Hey Jon I've just tried infinity wax turbo 6 sealant and I've found it brilliant , applied with da then buff off , it gave the car super gloss and beads like a hell and seems too staying strong after a month , give it a try 👍
Lithium Seal and Squeal last up to 12 months. . Company based in Utah 👍. 16 ounce bottle of blue beautiful goodness 👍👍
I'd love to try dodo juice iron gloss. It doesn't get talked about or shown at all on CZcams, other than a couple little bits here and there. If the buff is nice on it seems it could hit all your points, just need to get through my cheap products before I go buying more. They also do 100ml sample bottles, which if it does last 12 months like they claim (or even 8-9) the bottle will last ages
One polish that does that are the NSP from Dr. BEASLEY'S and it's normal because the polish basically acts as velcro where it will be looking/acting like grabby for a coating. It doesn't require an IPA and just you can coat over it, the coating will be looking great and not like foggy as the NSP does. It's just the nature of the polishing cream but its noticeable on dark colors doing that.
John the Polish Angel Famous wax (ironic name cause nobody talks about it haha)
I applied 1 coat on my golf and the results were amazing. Wipe on wait 20 minutes wipe off kinda like the q2 wax the buff was good.
I buffed earlier around the 10-15 minute mark and the buff was grabby. However the 20 minute one was a dream.
Performance even though it says up to 12 months I've seen some degradation on my first month in the lower panels ( the car was deep cleaned and polished ).
One more thing i applied some w6 black on the b pilars and my experience was amazing with it.
5 mintes to cure and the buff was surprising after watching you experience with it. It buffed like a dream and the smell is great.
interested in your thoughts on full install though mate. use it on a polished black car if you can.
Just started using a d/a today cause of watching you. Started just by polishing, next time il do some cutting to slay the swirls
Meguairs polishing wax or finishing wax from the detailer line are excellent products
303 grafen,very good chine and hidrofobic😊
I've found a light spritz of water works great for buffing W6
the only 2 sealants that I can think on that meet the criteria are turtle wax graphine to the max wax or megs hyrbid ceramic liquid wax i think can keep up with bh dsw. The buff on these 2 is amazing, even outside in direct sunlight. Now an interesting question springs to my mind ... can you put a spray way on a machine?
BUFFING!! BUFFING!! BUFFING!! BUFFING!! BUFFING!! 😂 Yeah sod that!!
I was going to buy this after we spoke the other day when i asked what’s on the BMW, but it’s seems to much buffing, arms will fall off 😂 think fusso maybe better or the ultra lock
Can you put some sort of ceramic sealant or qd over Rupes Advanced?
Can you suggest a budget DA or rotary with 3 or 4 inch pads for polishing small areas. Corded or cordless Ta
Imran DA12 m8
I like 3D Proxy montan hybrid according to 3D
Spray some water on removal cloth
There s20 one step is horrendous to remove to
No it's not lol. Did a car with it this week. If it's bedding down it's usually a technique issue. Too much compound and older spent compound on pad can bed down in patch on the panel. Shake bottle properly fir a minute. Clean switch pads and use less m8. I've experienced this but it's solved by technique.
@@forensicunplugged4295 nice one Jon I’ll give it another go in future and take on board your advice 👍👍
Love S20 black. My favourite one step for cut and finish. W6 is a nightmare