Testing AUS10 - Cold Steels new midrange
Vložit
- čas přidán 11. 09. 2024
- cedric-ada-sto...
Good gravy its bricky on things
Subscribe and hit the bell! Hit like and all that good stuff.
docs.google.co... - Full steel testing list for my cut test videos, free to all.
/ cedricada - support me on patreon if you like, helps me do the expensive stuff!
That ZT S35VN was 1 craptastic result. Seriously, AUS10 beat it. The fact that it beat the CTS-BD1 means they did right by the customers. Many were worried the AUS10 was going to be a downgrade. Cold Steel heat treating is apparently superb!
Didn't Pete retry on ZTs S35VN with a much better result?
Cold steel doesnt do knives or heat treat. They just stamp their name on things done by forges.
@@dias17se Your comment is simplistic and not at all true.
@@dias17se dude you gave yourself thumbs up.......
@@dias17se where did you get that info from?
Seems that Cold Steel heats treats all their steels well: they all seem to lead the pack. Based on your tests.
Cold Steel is certainly not for everyone, but I don’t think anyone can fault their heat treating protocol. They seem to get the best out of whatever steel they use. I did not expect this result! I suppose this means good high-hardness 440C should test similarly?
Cold Steel receives wayyyy too much hate. And yes their heat treats are very impressive. A large portion of of the knife community are knife collectors posing as users who adopt the popular opinion that CS makes "mall ninja" crap. CS makes knives for the working man, not the snobby collector whose knife use consists 90% of opening letters and packages.
The Ace Agreed. Aus8, BD1,XHp(!), S35vn all better wear resistance than others (from tests I’ve seen). And now Aus10. Some of the best value, best performers in the market. I’m glad Pete mentions the Lawman so often. The Knifenuts guys (who are into customs) have CS a good wrap on one of their podcasts - which surprised me).
100% agree...
Lol alot of there knives are mall ninja shit... but my code4 is an amazing knife.
There heat treat is always spot on.
They always make great knives... mall ninja or not lol
My Recon 1 is a great knife. XHP cuts through 9/16" thick extension cord containing 4 large copper wires with ZERO edge damage, still shaving every hair in one pass. Even after applying 50+ lbs pushing on the spine of the blade (attempting to push cut) and sawing on the copper. Not kidding.
Good luck with puberty, it can be a bit of a bugger.
How did you resist saying "it's like AUS8, but two more."?
Unleashed , Unleashed , Unleashed
That's a great # for that steel . Cold Steel does it again , some of the Best Bang for Buck Knives around, period. A lot of people where worried the AUS10 was a down grade and now everyone will want to try it . I wonder why nobody uses it , the AUS8 proved to be a pretty durable survival steel on the SRK ,so I would think the 10 would be even better , no ..
Great job Pete .
The "mall ninjas" are the ones always flocking to the latest over-hyped handle/blade materials, or laughable/unproven locking mechanisms, and super fancy grinds and designs. Those are the CZcamsrs with only tabletop reviews and no user footage aka "mall ninjas" and posers - mostly collectors.
I just saw the beautiful new $450+ m500 (mall ninja) "Anthropoid" dagger in Elmax steel from Acta Non Verba knives - does it have the tip strength and cutting capacity of Cold Steel's Tai Pan?
🤦♂️🤣🤣🤣
Elmax is best used for a blade geometry/style with more cutting, slicing, and chopping capacity.
The Fairbairn-Sykes fighting dagger on which the m500 is inspired by, is primarily a fragile needle nose stabber needing a steel with more focus on proper heat treatment, high toughness and point geometry to avoid blade/point snapping and blunting.
A better tool steel would drop the price dramatically and provide better durability for the m500's design.
Now, if the Tai Pan were using Elmax steel....WOW!
i have been edcing a cold steel voyager in aus10 and having just watched this I am amazed at how in line your testing was with my feelings on the steel. I work at a manager at autozone and on truck day i open lots of double corrigated oil boxes. this knife beat my zt 0909 in terms of edge holding. odd with how much better this does than 440c with almost same levels of ingred. maybe this was the good 440c you were looking to test.
If anyone has followed Lynn Thompson and Cold Steel for a lengthy amount of time, one will appreciate his philosophy in product design:
1) Offer more performance at all price ranges.
He didn't run to the latest over-hyped knife materials, that sooner or later becomes replaced by something slightly better - he finds out what's affordable, dependable, user friendly in terms of ease of resharpening, and realistic edge retention and overall attributes for a particular design/function.
In particular, Cold Steel pays attention to heat treatment and blade geometry for particular uses in blades.
That's why so many CS users still swear by AUS8A - even their 4116 stainless and carbon steels do extremely well for their price points and particular tasks.
I love Cold Steel folders. I recently got the Large Luzon.
For 40$ it’s great, I’ve had mine for about 2+ years now and have used it in my civilian job (metal work) and in my military duties. Broke the tip twice (abuse not through regular knife use ), used it as hammer, glass breaker. The lock up still holding strong, the blade is useable but I have put it through its paces. Sharpens easy and 6” is a whole lot of blade to work with. (Don’t let the ladies fool you)
I retired it for a Voyager XL but it’s still in my collection and use it for fun at times.
The large Luzon is in my top 5 💯
I also have the XL Espada. It is cool if you like carrying a large folder.
@@xaverbishop6506 have you seen the boker kalishnikoff xl?!
@@francismartino6890 Ill have to look that up.
Thank you mate. Was going to buy a few japanese knives made with this steel and was a little bit skeptic. But now i feel more comfortable
oh yeah, its a good one especially in the kitchen
I own a CH model 3501 in AUS10 it's an excellent knife. You should consider one. Very nice milled titanium frame lock with excellent bearing action and it cost me $64 US. A hell of a lot of knife for the money.
4MAX Scout is a terrific value in this steel right now.
An absolute beast that will outperform and outlast other higher priced tank knives.
ALL of the other so called very expensive "hard use" folders out there, fail in one major aspect:
Dependable lock strength.
The time tested well made lockback mechanism isn't fidget friendly, but it's the most dependable and it gives the most satisfying bank vault sound. The Tri-Ad Lockback greatly improves the dependable time tested design.
best and most comprehensive steel comparison ive seen on youtube so far. VASTLY underrated channel imo. how the hell do you not have more views/subs?
Simple. Other channels just have pretty table top reviews just focused on looks and mild discussion on "performance", aka the "Mall Ninja" channels.
REAL knife users care about blade performance, ergos, price, carry, sharpening, etc.
Blade collecting mall ninjas fawn over high prices and exotic blade materials and aesthetics.
That's why Pete doesn't have that many subscribers.
I ordered the tanto air lite for edc mostly for the trilock and lightweight. I wasn't sure about the steel. I really appreciate the effort and feel good about my decision 👍
Wow who knew that AUS10 is better than 154cm. This steel must have a very fine grain structure. Cool stuff Pete
More cuts doesnt mean better,could be chippy as hell
im predicting a decrease in stainlessness, and who knows how the complete picture is. Edge retention wise its pretty impressive though!
You look like spiderman out of uniform
Are you a superhero as your day or night job?
BTW : Not a cat fan (unlike my chick) ,that said....your cat is the cutest I have ever seen.
So puffy ! So chill haha.
Nicole says "MORE CAT FOOTAGE" !!!
@@BOOSTEDLASER It's not. I have a couple of regular hard users in this steel, and have had no problems with chippiness.
Wow. That's better than i expected, didn't think it would be better than BD1. Impressive, might get a Voyager or Counter Point in it. Thank You!
I'd love to test Cold Steel Aus-10, I was able to test Tuya knife Aus-10 and it did beat BD1 by a slim margin. Cold Steel seems to have very good heat treatment process so I'll have to get one and try it out.
The deeper voice is EXACTLY what I imagined all the "manly" men from Australia sounded like when I was a kid. Also, if you throw that knife, will it come back to you?
I like cold steel. Sure some stuff is a little crazy but their stuff is made well. I have a cold steel voyager that’s a decade or more old and it still rocks. That blade is HUGE
How is Cold Steel's stuff crazy?
Cold Steel has always been a martial arts-tactical based company. They believe big blades should be the norm.
Prior to the late 1800's, carrying a knife with a 7-12 blade edge (Bowie or dagger) was the norm.
Today's sheeple normies are "intimidated".
I have a bunch of brand NEW old Cold Steel knives with AUS8A. These include old Voyagers of all sorts, including an XL Voyager with a 6-inch blade and a Vaquero Grande. And many 5-inchers with polished VG-1 blades and AUS8A blades. All are in a box of my knives. I also have many CTS-XHP bladed knives, but I've also added them to my collector's box. My EDC is a 4-inch Broken Skull.
Years ago I bought a used (and worn) Voyager (AUS8A) serrated blade. It was my first Cold Steel Vaquero 5-incher and I was taken on the deal. The serrations were badly worn, but those serrations still feel sharp to the touch, and I've put a few miles on them myself. I still carry it for defense on occasion. So Cold Steel AUS8A serrated blades seem to last forever. I can only imagine what AUS10A blades will do. I just bought a Cold Steel Spartan serrated version. It has a dark gray handle and it's it looks great.
Love this Cold Steel Spartan Aus10A Curvy Bowie blade style shape and performance... Always think that if Crocodile Dundee and/or Rambo are traveling around the World and lost their respective knives if They don't build themselves one absolutely I bet will buy this Spartan Eyes Closed.
“Wow great job Cedric! Keep it up!” -Mrs. Obama
I'd really like to see Cold Steel's 52100 Ball Bearing steel put to the test.
Yes please! My son has the Bowie and has put lots of work into it over 3 backpacking trips and it’s still essentially shaving sharp. Beats all my Swamp Rats/Scrap Yards in edge holding...
@@scdub oh $#&!....no way!! Really?? They'll cry don't tell em
@@tikkidaddy i mean i'm not suprised they both use the same steel lol
@@stalememe6407 Well I mean it's close Thats for sure, at least according to Mike Stewart of Bark River.
I spoke with him in their FB group after I had read some things elsewhere someone had snap shot that he had said...since the internet is what it is...I decided to check.
He has high regard for the old CS Carbon V made back then by Sharon Steel. Camillus used it for the knives for CS, and CASE used the same steel for their carbon knives, but I don't think CASE cryotreated their blades back then, I could be wrong.
I have the same regard...because I still have my first Carbon V blades, made in the late 80s and 90s.
My user TM has had the slobberknocker used out of it. I sent it back to Ventura to be factory resharpened, and rehandled to boot. Just goes to show that my grandfather was right. A decent high Carbon steel with a good heat treat and temper is enough if you take good care of it. My CSSRK user has skinned and removed turtles from shells for turtle soup, for lack of a pair of pruning shears too!
Maybe Scap Yard messed up the HT?
We see in reality AUS 10 A is no midrange but on par with some higher end steels! Well done from AUS 8 to BD1 and now AUS 10. Is believe there will mo better "midrange"successor! By the way, love my Spartan ! I had all beginning with AUS 8, tgen AUS 8 stonewashed, followed by Carpenter BD1 - but the newer version beats them all by far ! Thanks for that great review.
I just got this Spartan and the AD 10 1 week ago. The AD 10 I was figiting with it and I ended up dropping the opened blade onto my inner thigh. I should have went and had it stitched instead I super glued the wound. Both knives are razor sharp. Be careful if you’re sitting around playing with the AD10 . It is unforgiving
ALL knives are unforgiving, especially when they're extremely sharp and heavy or played around with sufficient speed.
Want to safely fidget with a knife? Buy a balisong trainer.
What can I say?
Another awesome video. Well done, and proves that heat treat is as important as the steel used. Keep up the great work Pete
Cold steel AUS 10 on my Espada is fucking awesome.
Been waiting for this one!
Came here with a link from Gideons Tactical channel. Good stuff!
shojus same
Now I have to buy one. I was hesitant to pull the trigger on one of these Thanks.
Thanks for the great review, sir.
I'm sold on Cold Steel, I haven't gotten a knife from them I don't like including the Spartan.
Anyone that actually USES knives, knows that CS delivers amazing value and performance for the money - from their cheap to expensive stuff.
I was thinking about buying this one and suddenly! ! Your vids showed up ! Bang! Alright...I'm getting it tomorrow. Thanks.👍
Nice🙂 I hope they upgrade their AUS8 knives to this
Came here after seeing the new Cold Steel Air Lite in AUS10. Very intrigued by it as I've been waiting for a normal-looking Cold Steel with traditional lines and a more comfy handle. Your analysis allays concerns about getting shortchanged on the steel. Thanks much.
Hey pete- great video! pleasantly surprised that AUS10 can stack up to 154cm in edge retention. Would you be willing to do a s90v toothy v polished video? I'm really curious to see that steel's limits. thanks as always!
I like the blade design kinda kukri like.
Nice steel I really like 154cm so this would be right there.
You should get a hold of a Case XX brand knife you can test that had a blade profile that can be tested like these other ones. A Case "hammerhead" knife is a lock back with a clip point blade with some belly that would allow it to be tested easier. I would just like to see how the Case 420HC stacks up against the CV steel. I have seen your other video but it appears the skinning blade's profile skewed the results. I would like to believe that the CV is more wear resistant but I have seen a test done by another gentleman that said the 420HC held up better. I believe your testing method to be more repeatable and therefore scientific, there are lots of Case knives to choose from and the testing would help me evaluate my next purchase. I'm looking to get a Case Tribal lock, they are very beautiful knives and I appreciate the blade shape and handle configuration. Thanks!
I did not expect AUS10 to perform above and beyond S35VN or Niolox. That really surprised me. I expected more in the ballpark of slightly higher than 440C.
Color me impressed.
Anyone that's seriously used Cold Steel's products, knows they're not just marketing hype.
They deliver the most dollar for dollar performance across the various price ranges.
Today I learned something new, thank you.
That's a huge improvement over the Cts-bd1 version that I have. Mine must not have been heat treated well or something because the edge rolls if you breath on it. Not kidding, I probably couldn't get 10 rope cuts on my BD1.
Hi Pete. I'd love to see VG10 added to your spreadsheet. Haven't found any specific info on it vs other steels in your data or Larrin's. Also curious if AUS10, is different than AUS10A, or are those 2 names for basically the same thing?
Yes, AUS10A and AUS10 are different in terms of quality, despite being exactly the same in material composition, but AUS10A was originally (including AUS8A) created by Aichi foundry.
The "A" that follows AUS10, denotes that the steel was manufactured by Aichi (what the A stands for) foundry in Japan.
Blade companies that list the AUS8/10 without the A, means the steel was made outside of Aichi foundry and/or outside of Japan.
The quality of the steel made outside of the Aichi foundry, may be inferior due to lack of rigid quality control standards and corners cut in steel composition.
@@TheScotchaholic thanks for the info. Very interesting.
Wow, more money for the "equivalent" of 440C. Just being a jerk, I swear by 440C . I love the usability of Cold Steel. I also love the Spyderco knives (but the cost...not so much), but when it comes to cutting out weeds in the lawn...I just can't get myself to take out my $200.00 Spyderco and take a chance on a stone being beside the weed root. Cold Steel rules, man! (As told to me by a martial artist about 25 years ago). This reluctance to to use "expensive" knives in crude ways I believe is almost universal in the knife nut world.
Wow, didn't expect it would beat D2...
I own that silly knife, think mine is AUS8 though. Doesn't say on the blade.
Thanks for doing what you do.
You should try a few different tests like cutting cardboard or wood on maybe like 5 steels from across the range so we can compare the different types of tests and maybe get some sort of rope to wood ratio
Always been looking for better edge retention in my rajah 2. Seems it’s a bit of an upgrade but not enough to purchase again.
Was hoping for a cts xhp version but that’s never gonna happen. I wish cold steel did sprint runs
Lol, I was only looking up AUS 10 because I wanted the Spartan. I see I’m not the only one!
Cold Steel knows what they're doing - hopefully the new management won't screw things up.
Yay Adventure Time! ;)
IMO you’ve got good taste in knives AND cartoons.
Best damn intro
BMO at the end gave me the feels. Good video though, really considering the spartan.
How difficult is Aus10 to sharpen? It’s harder than d2 or similar ? Can someone help me please haha
not hard at all really. quite pleasant and easy to handle.
It sharpens very easy it's a steel u can feel when it's getting sharp on a stone. holds an edge well never had any of cold steel or demkos 10a to be chippy either.
I would like to see some testing on Benchmade's D-2, to see how it stacks up. I saw the comment about the CH knives, I have to admit the fit and finish is excellent for the money and they are supposedly made out of D-2. I have a couple and some Benchmade's in D-2. Get in touch with me and I'll send you some knives to test.
Love you Cedric! Keep it up!
His name is Pete, one of his dogs name is Cedric lol
Great review.. what’s the name of the knife app you were referring too. Thanks
Any way you could test some of their L52000 or whatever it's called in their drop forged line? We have knifemakers selling mid 400 dollar knives out of it and I want to see if the cold steel holds up
yeah will probably order a drop forged survivalist at some point in 52100
@@CedricAda nicee
Unexpectedly.. I’ve come to really like the AUS10 in my ridiculous 4max toy. It takes a really keen edge, holds it decently, and it strops back to keen quickly and easily.
Not sure how tough it is tho?
For the thickness and geometry of the 4 Max Scout, the AUS10A should be plenty tough for it's price range.
Otherwise, you'd be paying a whole lot more for a tough super stainless steel like Magnacut in a 4 Max.
Interesting steel, crazy knife 😁
Good move on Cold Steel's part. VG1 performance w/o the expen$ive lamination. Never looked up if VG1 & AUS10 was the same steel or just simular? lways thought it would be a good performer done right, but not that good. Sure the bellied hollow helped a bit. Take care Pete squeak... lol : )
CS does a good job w their heat treat. curious how other brands do using aus10 e.g. kubey knives
See, THIS is kind of breakdown knife enthusiast are looking for.
Gideons tactical sent me . Awesome video. Like and subbed.
FFS, they need to rename that 'thing' *Batman's Bad Acid Trip*
Val Kilmer Batman
The Cold Steel - Batman's Raging Phallus
Did you use Actraiser boss battle sound? My god who could notice.
The jewelstik from kme works great on the recurves. I'm curious if the number would get better
It's been some time since I heard of the 'Lurgy' - get better soon
Hey hey hey!!
I need a CS American Lawman in AUS10 with a non coated stonewashed blade for $50-$70... make it happen Cold Steel
Just bought the s35vn and it's great... And the dlc coating is more durable then you would first think. Just give it a try.
Seems coldsteel heard your statement they have the recon an a mini recon aus10 can't see why the lawman won't be done. The funny thing none had coatings. They also had AD15 in aus10 I personally like this steel a lot
"Midrange" my ass... Some marketing is just better than others
Dude, where was that music you used from? Sounds so familiar......
I find that AUS-10 knives have trouble staying razor sharp for very long and then to go dull rather quickly. They are also a pain to sharpen because the steel is so hard. I dont know why they say this stuff is so great.
Pause the video around 5:56
Lol... what? I mean, i guess that's possible, if they aren't Cold Steel AUS10A. I have several, that I use regularly, and I have found the edge retention to be great, and the sharpening rather easy, on par with like Buck's 420HC or Kershaw's 14c27 (in terms of ease-of-sharpening, not edge retention, the AUS10A is better than either in that department).
This was a surprise to me. Pete thats why i always check you videos. I trust your rope tests after all this time. Appreciate your work. thank,Harry
Pete, do you think a large heavy knife has an advantage over smaller folders? Just thinking, dangerous lol thanks,harry
It's very simple:
A big knife can do what a small knife can, but not the reverse.
If you're talking about ease of carry and not frightening the sheeple, then no, big knives are at a disadvantage.
Very interesting... "Subscribed"!!!
How about the edge retention of the AUS-10A?
The AUS-10A is better then CTS-BD1 i have couple cold steel in CTS-BD1 and i will like to try The AUS-10A
hold on....there is a knife steel app, do tell
Is that Final Fantasy 2 music
As suspected, concealed within him was a much more stereotypical, manly sounding Australian. But until he caught a cold, he was able to keep that true nature hidden.
You need better audio mate. Great vids tho
Nice!
AUs 10 or D2?
I enjoy your videos. The final fantasy music sometimes makes me wish I could go back to the late 90’s. Keep it up yo. Peace from the desert in USA
Unless you just got a freak of a knife. The numbers shouldn't be that hi. They May of accidently made it out of xhp.:)
Nah, these numbers check out. I have several regular-hard user knives in this steel, and my results (in day-to-day-use) mirror the result pete got.
No accidents.
Cold Steel sources reliable steel manufacturing and heat treatment for their blades.
Cs heat treat is very good
I had a well bad lurgy on me knob
Great Work Pete,Think you meant Nickel rather than Niobium,but with results like this Who Cares :-)))
lol.. he’s made that boo boo before.
Tony Canniffe, ELemental symbols 101 :-))) Niobium was Named Columbium at one time after the columbite Ore it was Mined From. Take Care T
the W still stands for Wolfenstein, right!?
Pete, if said in falsetto. Yes.
Wolframite Ore Rich in Tungsten deposits :-)
Dudes stoned af
Got a Lionsteel M4 (M390) best deal in Knifedome ...ever
Real,proper M390 with a good HT
A***
NEVER thought I would like any NON Bark River
yeah those are wonderful knives
How long is the blade .and how much does it cost .I like the looks of that knife .
Didn't lc200n cut 200+ and is a non powdered steel?
Costache-Bobescu Ionuț its an electroslag steel which is different again, I believe
@@CedricAda oh ,ok
Did you ever just try stropping your blades to bring back the razor sharp cutting edge instead of a sharpener that probably removes metal?
That steel just beat the shit out of the majority of 20cv m390 and the other overhyped super steels
Rigid quality control standards for sourcing of steels and heat treatment, beats poor heat treatment of "better" expensive steels and/or poor blade geometry.
@@TheScotchaholic I wish more people knew that
@@evildead1791
Also, there's the wrong assumption that certain steels are the same and that these steels such as AUS8A and AUS10A, are made with the same quality control as regular AUS8/10. The last "A" denotes that the steel was made in Japan by the Aichi steel company.
Those marked as just "AUS8/10" are NOT made in Japan, and can have lesser qualities such as corrosion resistance.
I've carried a Cold Steel X2 clip point Voyager in AUS8A for over a decade, with body heat/sweat in summer indoor and outdoor conditions, and haven't experienced the corrosion issues that others mention with their "regular" AUS8, that could be made anywhere, skimping on the chromium for cost cutting.
@@evildead1791
Not all foundries and heat treatment facilities are the same, and differ with equipment and standards quality of work/materials.
@@TheScotchaholic you should give this explanation on bladeforums nothing makes me more hot than seeing aus8 is just aus10 debates haha and the a is there for a reason.
AUS-10 is two more AUSes than AUS-8.
this is also Aus10A which has 100% more A also
I had to awesome 8 Cold Steel Spartan it had to be replaced due to chips about the size of a half penny in the edge of the blade one happened while batoning wood in Hawaii the other smacking through some thick foliage in California.
Maybe you have been breathing in too much steel dust. Be careful! ;)
Hey I have a big curiosity you know. Chinese copies are common these days and they are copying particularly well this model and a few others from Cold Steel. What I would like to know is the steel used in the Chinese copies and if it's good. I don't expect them to be the same quality of the original, they're definitely not but just how good are they..?
Like a vir ir ir irgin... cut for the very first time
Is the spartan stainless
good video mate
Looks more like 154cm minus the moly.
dude you should do some t-shirts, I would buy one or two:)
Yummmmmmmm