i knew the majority of what was said here, but the way you presented the information was brilliant. went into just enough detail without dumbing it down too much :)
thetruebrit85 One option to connect your computer to your Denon AVR is to use a stereo to RCA cable. There are other options as well. We posted a photo of a Stereo to RCA on our website. You can visit the site and see the photo by clicking the link beneath this video you've watch. We posted the photo in a Question/Answer forum located at the bottom of the webpage. We also listed some other connection options. Thank you for asking.
My whole system has been disconnected due to a flood. I always wondered how speaker wires were connected. I have a technician coming to see if he can reconnect my system-nothing was damaged except my CD player but I have a backup:). Great video👍🙏🎶🎼🎵 10:32
We'd need more information. But, it sounds like not only are those "wall connectors" for the pair of ceiling speakers but also other speak wiring in other parts of the house?
Hi Marcus. What HDMI input do you have your Xbox plugged into and have you selected that source on the Onkyo? Have you checked the settings in your Xbox to see its set to output audio on the HDMI?
Wow man you are freaking awesome! Subscribed and Liked! You should be a professor because you speak so confidently and so clear. Keep at it! Thanks again!
Utterly professional nicely explained especially to someone like myself who's getting on in years & ain't to computer of Hi Fi savvy..!!!!!!! I've just purchased a Denon AVR 3802 in mint condition for £20 which I'm using in my kitchen I'm only using it for music Cd's I have an old but mint Bang & Olufsen turntable running through it but my problem is I'd like to run my old but mint Dell computer through it only to play some of my 2000 songs that I have stored on it it's the type with the big b
Hi William. We looked up the STR-DB930. If you want to listen to music from your macintosh laptop you could probably connect to the DB930 using a "correct size Stereo to RCA" assuming you mac has a stereo headphone jack. Regarding the question on connecting stereo speakers, yes you can run into a problem if the speaker OHMs and the OHMs rating on the STR-DB930 don't equate. You risk damaging your equipment.
I used silver core speaker wire on a reel ...it cost me £800.00 for that reel ...I used a lot of speakers , i still use all the kit .which is now over 10 years old and its great .extra front speakers (for more bass or all together) plus extra surround , now none has AMOS ..
Hi There, I would need your help to set up my Onkyo TX NR 6100 brand new l got it as a gift 4 years ago and never got to use it. Still in the box. I would need your help to set it up with my Bose Acoustimass 3 Series IV Speakers that have both the input that comes from the amp and the output that goes to the cube speakers at the back of the sub. I have two sets of the Bose Acoustimass 3 Series IV Speakers and would like to use the front and rear speaker output of the TX NR 6100 like an integrated amp for playing music as well as watching my cinema. Thank you for your help.
There could be, it would depend on a number of other factors as well though; one such factor would be, but not limited to, how well each component/wire in the system is matched in capability/quality to one another. The difference in the quality of sound would likely be unnoticeable to most users who just want the enhancement of surround sound etc. Use of Binding posts would most often be preferred however.
I keep the Receiver on max 99 when I get Sonic Adventure Dx Director's Cut i"m setting the audio options to Dolby Surround Prologic ii and so as Sonic Heroes Dolby Surround Prologic ii and Shadow The Hedgehog Dolby Prologic ii 3 sonic games for the gamecube surround sound.
I'm gonna play the ps2 version of Sonic Unleashed until I fix my driver and black ps2 slim laser and my Black Dualshock PS2 Controller set it Dolby Digital Pro logic Surround sound which is 7.1.
Khoi, thank you for watching. Unfortunately we are not able to assist you with that particular question, in part, because we have no working familiarity with the Mackie 1402 mixer.
Hey i have a Yamaha receiver the model is a HTR-5790 and I need help hooking it to my Panasonic tv. my television has HDMI connection but the receiver don't have the HDMI connector
I recently received a onkyo tx 904 and I can't figure out where the red white and yellow go and where they go into my t.v.. I freaking tried everything but no sound comes out of the speakers. Every spot on my tv for the red white and yellow are different inputs so I can't set up my ps4 and the receiver on the same input. My brother had it set up somehow with his tv and ps4 and it's really starting to irritate me. It shouldn't be this hard to figure out.
Hi, I just got a SONY STR-DB930 home theatre system, can I set it up with my macintosh laptop via the MD/DAT ins and outs? and also it is built for surround sound, can i plug a stereo set of speakers in successfully? will i have any trouble with it?
I have the same amplifier I connected my paradigm 4 speakers But only one is working Please help Dont know where to plug the output coming from the dvd Help please
A component connection reproduces a noticeably superior picture versus a composite connection. If you want to use a component connection but don't have an "component" cable on hand then you can use composite cabling in the component connectors. Just do one at a time so you match the connector hook ups like: green to green, blue to blue and red to red component and then hook up the red / white audio. (ignore the colors on your wires)
Great video. Thanks a lot. Can you do another video showing how to connect an av receiver to a mixer? I have a karaoke system at home and I want to use my Sony STR DE 845 av receiver as an amplifier to connect to a Mackie 1402 mixer. Thanks a lot.
I have an HDTV, but my recivier is quite a bit older. I have it hooked to the cable box via HDMI. But I cant connect it to my recivier because the only output for sound is Digital Audio, Do they make cables that go from Digital Audio to Composite?
Hi there please can anyone help me here? Tomorrow I will have an onkyo tx sr 606 avr receiver and I have never used one before and I want to put it with my jvc smart tv but I don't have any clue where to start. Can anyone help me please thanks Jamie
Hi. Excellent video, this have really helped me out a lot! One question, is there any difference between composite and component video cables? I want to connect my dvd recorder to my Yamaha receiver using component video. Can I just use the common composite cables without losing quality? Thanks and I subscribed :)
Hello, I just got a ONKYO AV Receiver HT-R560. Can you tell me how do I get sound out of the speakers when using a HDMI input for a laptop and x-box 360
I have a Denon AVR-2309ci Going to a Old Panasonic Plasma TV. Love the TV. What I've found is that the Denon HDMI port says "monitor out" but does not say (ARC) but the old TV Does. Are they simply not compatible ? I cant seem to get video or audio out of any configuration using HDMI Nor the Optical. I'm seriously frustrated here as I just sold my HK AVR that worked fantastic,but I wanted the HDMI upgrade. maybe the used DENON is broken??
Yes, that AVR has 6 Red White AUDIO inputs. We assume the “cassette deck” has Red White jacks on back ? If so just be certain to set AVR to which ever input you plug into
This is just not true. Banana Plugs are the best connections for the binding posts. Way more reliable, secure and assure a solid connection of the leads into the binding posts. There's no sound quality decrease, I'd say maybe the opposite as every filament of the copper is going to perfectly touch the internal aluminium copper of the binding post, especially if using an high quality 12 AWG 1.5mm2 cable that is way thicker and would be really difficult to attach with the regular system showed in the video.
I think the emphasis was for people who wouldn't be ready to throw out 7+ bucks out of their wallet, for each plug. A ridiculous price for a little guyzmo produced in chain and high qty for cheap cents... Of course the banana plug is great, but one can still have a comparable (if not better) quality without using these. IMHO that was the point, and to make his point he used the generalization that each contact point of a circuit degrades the signal, even infinitesimally for banana plugs. A generalization which is true for many other applicative fields involving electrical analog and numerical "pass-through" technologies (or any other "system" at large : the more you add parts to some system, the more you induce potential points of failure). One just has to make sure that the "direct" contact entails all the little wires at the base, which can be difficult... But anyways the field formed by a group of cylindrical/adjacent conductive wires (twisted together between thumb and index), makes up for a cleaner (and more stable) signal than each little wire taken individually. It's not like each little wire contains a specific "information" (cut one and you'll still have a good _signal_).
theyre wayy cheaper noew and at the time of uur post . just incase ur interested in using; more competition once thery got popular with the mainstream.and banana plugs are great; either way works, just ask yourself: if youre gona be switching wires easily then banana; but not going banana will not mattter to the people who arent audiophiles. im an audiophile and prefer bplugs :) if tthe system is good enough to warrant them ofc. value is king. and ebay the plugs instead of paying premiums if u can chill... unless u find good deals or want/need it now sure, brick and mortar. but you know that im sure :)
Andy Broberg If you switch often, yeah it's a great solution, but if not... BTW It's not a matter of «to be or not to be an audiophile» lmao! That's a ludicrous marketing misperception: as mentioned in my previous post, it's essentially a simple matter of science (conductivity), period. If they get (much) cheaper, well then yes it would be a great and effective solution to contemplate seriously, when one isn't so versed into electronics soldering nor capable to effectively "twist" coper wires together (or doesn't have the "valuable" time to do so). In the mean time, there are other ways to get as good if not better contacts.
you can get banana plugs on ebay and there is many kinds but they all do the job the right way and i done work on many receiver and i never heard of a receiver losing sound just because someone use a banana plug and with a banana plug there is less change of the wires touching and causeing a short but other then that i love your video please make some more ok
Thank you. If you haven't already...please check out our website and/or like our Facebook page. We try to post relevant electronics information and tips there too.
I wonder if someone could help me with this problem. I connected audio out with a component pair from a new tv to an old amplifer. I tried using the input for tape, dvd, sat. etc and then set the amplifer for those settings but get no sound! Help Don R
Hi there my friend, I've Recently bought myself a BRAND NEW Old Stock (never opened) in the box DENON AVR-3300. Was SO happy. I thought "No HDMI's but it's cool, I can connect my PS4 to my TV, then i can connect my PS4 to my DENON using my Digital Optical Cable" Now, this doesn't mean for one second that I'm not a COMPLETE Anus. I'm brand new to the sound world. ANd Video obvious, is a NON HDMI amplifier dead in the water wen it comes to PS4 and HDMI TV? Thank you (Please give me good news, Or I'm afrad I'm going to have to do what my wife keeps asking me to do, and that is to walk into the Ocean wearing the Brand new Concrete Boots she bought me as an anniversary present. Subbed as your channel has helped me before! Thank you
Can you provide a little more information such as the make and model of the receiver and the sub woofer? We don't recommend you make that connection you've described because based on the information you've provided you are potentially asking about something that seems outside the design and intent of both pieces of equipment.
Do you have any HDMI cables Dollar Store not preferable yes mostly the same good luck old school and new school it's learning how to separate the wires get yourself an old-school HDMI cable
pretty much means the same thing Josh ,INPUT and interface ,input being more pc a title and interface was for tvs ,,,but manufactuers use both terms ,,,,,
I have a Pioneer VSX-504S it has no HDMI ports. I am trying to connect it to my Element 55" E4SW5518 smart TV. My receiver has no optical plugs either. Element Tech says I should be able to purchase some kind of converter for the receiver to change the receiver plugins to optical on the other side to fit into the optical plug on the TV. Is this possible. I have Bose speakers and I would really like to be able to use my surround sound. thanks
Short answer? Yes. Longer answer? Our opinion: that by purchasing such a device you might not be fully happy with the purchase because the signal limitations could prove to be significant. In certain situations you'd hear sound but not in a true surround sound format and in other situations you likely still won't hear sound.
banana plugs degrade the sound? well terminated cables with plugs are oksygen free which is better than a normal speaker cable because the metal can get rusty
How do I run my old Dell computer through my recently purchased Denon AVR 3802 receiver i only want to play some of the 2000 songs stored on my computer through my Amp......Please help....:)
Red white to earphones any cable that are headphones take your computer cable split left to right red and white all right subtle form use any computer Jack they are usually green he wants around it's not going to work it can but I'm not going to do that for you sorry my friend I did not mean to be ignorant PC component cable red and white to computer cable I make them all time take your time by a spare cut it a little bit each end the thing you must understand this nervous only two ends and the ground don't confuse yourself if there's more or less then to daycare computer green cable caught softly there should be two and maybe a ground that simple sorry you choose on let me explain to you
banana plugs DO NOT DEGRADE THE SOUND AT ALL I HAVE 2 RECEIVER HOOKED UP BOTH USEING BANANA PLUGS AND THE SOUND HAS NOT DROP AT ALL IN 2 YEARS THAT STATEMENT IS I00/000 BULL COOKIES
For better sound never use av but dac to pre amp with tube then to cross over to power amp..base is most important so use nothing mid frequency base as well as low frequency supersonic upto10 hz setup....welcome to natural sound system setup...
Good tutorial, but- buy better quality cables,and a heavier gauge speaker wire. I disagree with 18 G wire, a min of 16 and even better is 12 for long runs.
Pssst.... Hint: Buy a system that offers HDMI if you see a system like this,, don't buy it Buy a system that offers HDMI HDMI connecting offers TOP Sound and PICTURE also works with 3D systems
i knew the majority of what was said here, but the way you presented the information was brilliant. went into just enough detail without dumbing it down too much :)
Excellent Video, you are a time saver. Very well done. Learned alot!
Thank you Sir I applaud your generosity in going out of your way to take time to help with my problem.
Kind regards.....:)
Excellent video.. I learned a lot.. thank you to taking the time to show us how to connect out devices.
Great video man, Thanks for your time.
Very thorough and well explained for people who know nothing. Good stuff!
Thank you for taking time to get me on the straight & narrow so to speak your kindness is much appreciated mate....:)
thetruebrit85
One option to connect your computer to your Denon AVR is to use a stereo to RCA cable. There are other options as well.
We posted a photo of a Stereo to RCA on our website. You can visit the site and see the photo by clicking the link beneath this video you've watch. We posted the photo in a Question/Answer forum located at the bottom of the webpage. We also listed some other connection options. Thank you for asking.
My whole system has been disconnected due to a flood. I always wondered how speaker wires were connected. I have a technician coming to see if he can reconnect my system-nothing was damaged except my CD player but I have a backup:). Great video👍🙏🎶🎼🎵 10:32
Looked up the manual on the Denon AVR 3802 and posted a picture of the back panel showing where you can plug in your PC
We'd need more information. But, it sounds like not only are those "wall connectors" for the pair of ceiling speakers but also other speak wiring in other parts of the house?
Hi Marcus. What HDMI input do you have your Xbox plugged into and have you selected that source on the Onkyo? Have you checked the settings in your Xbox to see its set to output audio on the HDMI?
Wow man you are freaking awesome! Subscribed and Liked! You should be a professor because you speak so confidently and so clear. Keep at it! Thanks again!
Utterly professional nicely explained especially to someone like myself who's getting on in years & ain't to computer of Hi Fi savvy..!!!!!!! I've just purchased a Denon AVR 3802 in mint condition for £20 which I'm using in my kitchen I'm only using it for music Cd's I have an old but mint Bang & Olufsen turntable running through it but my problem is I'd like to run my old but mint Dell computer through it only to play some of my 2000 songs that I have stored on it it's the type with the big b
This method so much better sounding than a sound bar
Please dear can you give me your opinion on best yamaha aventage receiver for great music quality. Thanks for your response
Hi William. We looked up the STR-DB930. If you want to listen to music from your macintosh laptop you could probably connect to the DB930 using a "correct size Stereo to RCA" assuming you mac has a stereo headphone jack. Regarding the question on connecting stereo speakers, yes you can run into a problem if the speaker OHMs and the OHMs rating on the STR-DB930 don't equate. You risk damaging your equipment.
I used silver core speaker wire on a reel ...it cost me £800.00 for that reel ...I used a lot of speakers , i still use all the kit .which is now over 10 years old and its great .extra front speakers (for more bass or all together) plus extra surround , now none has AMOS ..
Hi There,
I would need your help to set up my Onkyo TX NR 6100 brand new l got it as a gift 4 years ago and never got to use it. Still in the box.
I would need your help to set it up with my Bose Acoustimass 3 Series IV Speakers that have both the input that comes from the amp and the output that goes to the cube speakers at the back of the sub.
I have two sets of the Bose Acoustimass 3 Series IV Speakers and would like to use the front and rear speaker output of the TX NR 6100 like an integrated amp for playing music as well as watching my cinema.
Thank you for your help.
There could be, it would depend on a number of other factors as well though; one such factor would be, but not limited to, how well each component/wire in the system is matched in capability/quality to one another.
The difference in the quality of sound would likely be unnoticeable to most users who just want the enhancement of surround sound etc. Use of Binding posts would most often be preferred however.
I want it to get Better Sound Quality of Wii And Gamecube and ps2 games.
I keep the Receiver on max 99 when I get Sonic Adventure Dx Director's Cut i"m setting the audio options to Dolby Surround Prologic ii and so as Sonic Heroes Dolby Surround Prologic ii and Shadow The Hedgehog Dolby Prologic ii 3 sonic games for the gamecube surround sound.
Banana plugs for Surround Sound system Receivers it's easy to hear both up and down front and back left and Right
I'm gonna play the ps2 version of Sonic Unleashed until I fix my driver and black ps2 slim laser and my Black Dualshock PS2 Controller set it Dolby Digital Pro logic Surround sound which is 7.1.
Khoi, thank you for watching. Unfortunately we are not able to assist you with that particular question, in part, because we have no working familiarity with the Mackie 1402 mixer.
COOL RUNNING DUDE...thank you
Hey i have a Yamaha receiver the model is a HTR-5790 and I need help hooking it to my Panasonic tv. my television has HDMI connection but the receiver don't have the HDMI connector
I have the same receiver but my Tv and all of my equipment is connected through HDMI, how can I connect them?
I recently received a onkyo tx 904 and I can't figure out where the red white and yellow go and where they go into my t.v.. I freaking tried everything but no sound comes out of the speakers. Every spot on my tv for the red white and yellow are different inputs so I can't set up my ps4 and the receiver on the same input. My brother had it set up somehow with his tv and ps4 and it's really starting to irritate me. It shouldn't be this hard to figure out.
Hi, I just got a SONY STR-DB930 home theatre system, can I set it up with my macintosh laptop via the MD/DAT ins and outs? and also it is built for surround sound, can i plug a stereo set of speakers in successfully? will i have any trouble with it?
How do I connect my DVD home theatre system to my FIOS receiver and my TV
I have the same amplifier
I connected my paradigm 4 speakers
But only one is working
Please help
Dont know where to plug the output coming from the dvd
Help please
A component connection reproduces a noticeably superior picture versus a composite connection. If you want to use a component connection but don't have an "component" cable on hand then you can use composite cabling in the component connectors. Just do one at a time so you match the connector hook ups like: green to green, blue to blue and red to red component and then hook up the red / white audio. (ignore the colors on your wires)
Hi
I have a similar Yamaha unit. Where is the best RCA plug input to connect a pre-amped record turntable.
Steve Trivoli
Great video. Thanks a lot. Can you do another video showing how to connect an av receiver to a mixer? I have a karaoke system at home and I want to use my Sony STR DE 845 av receiver as an amplifier to connect to a Mackie 1402 mixer. Thanks a lot.
I have an HDTV, but my recivier is quite a bit older. I have it hooked to the cable box via HDMI. But I cant connect it to my recivier because the only output for sound is Digital Audio, Do they make cables that go from Digital Audio to Composite?
what is the name of that cheaper connection on the back of the receiver?
Thanks for this, really helpful
Pls can you do video on connecting bose acoustimass 5 series v to a receiver
hi . how do i select hdmi on amp.
I have a updated 2015 receiver. I love this receiver for all my old components I have stored. What brand is this receiver ? Thanks. Great video.
+queenlaker I think its a Yamaha
All About Home Electronics.com actually its dvi (digits
video interface) a video only cable capable of up to 1080i (for interlaced lines)
the
how to connection to my recever
how old is that avr? why didnt you use one with hdmi inputs?
Hi there please can anyone help me here? Tomorrow I will have an onkyo tx sr 606 avr receiver and I have never used one before and I want to put it with my jvc smart tv but I don't have any clue where to start. Can anyone help me please thanks Jamie
whats the model number of Yamaha amplifire ?
Hi. Excellent video, this have really helped me out a lot! One question, is there any difference between composite and component video cables? I want to connect my dvd recorder to my Yamaha receiver using component video. Can I just use the common composite cables without losing quality? Thanks and I subscribed :)
what about the part that looks like a computer part
How could i connect 2 reciever?
s video is replaced by hdmi. am I right?
Really nice video. Thanks
Hello, I just got a ONKYO AV Receiver HT-R560. Can you tell me how do I get sound out of the speakers when using a HDMI input for a laptop and x-box 360
People don't reason or understand what HDMI is it is complicated for most bro do you research you'll say you're not real simple
I have a Denon AVR-2309ci Going to a Old Panasonic Plasma TV. Love the TV. What I've found is that the Denon HDMI port says "monitor out" but does not say (ARC) but the old TV Does. Are they simply not compatible ? I cant seem to get video or audio out of any configuration using HDMI Nor the Optical. I'm seriously frustrated here as I just sold my HK AVR that worked fantastic,but I wanted the HDMI upgrade. maybe the used DENON is broken??
Also I am trying to run a fairly new Firestick. I get nothing.
Both TV & AVR must be ARC and typically will have “ARC” imprinted on the respective ARC port. Verify in the Owners Manual
How can you hack up round to your tv
Do you know if I can connect a cassette deck to a Denon AVR 3808ci?? Thanks😎😎😎😎😎
Yes, that AVR has 6 Red White AUDIO inputs. We assume the “cassette deck” has Red White jacks on back ? If so just be certain to set AVR to which ever input you plug into
This is just not true. Banana Plugs are the best connections for the binding posts. Way more reliable, secure and assure a solid connection of the leads into the binding posts. There's no sound quality decrease, I'd say maybe the opposite as every filament of the copper is going to perfectly touch the internal aluminium copper of the binding post, especially if using an high quality 12 AWG 1.5mm2 cable that is way thicker and would be really difficult to attach with the regular system showed in the video.
I think the emphasis was for people who wouldn't be ready to throw out 7+ bucks out of their wallet, for each plug. A ridiculous price for a little guyzmo produced in chain and high qty for cheap cents... Of course the banana plug is great, but one can still have a comparable (if not better) quality without using these. IMHO that was the point, and to make his point he used the generalization that each contact point of a circuit degrades the signal, even infinitesimally for banana plugs. A generalization which is true for many other applicative fields involving electrical analog and numerical "pass-through" technologies (or any other "system" at large : the more you add parts to some system, the more you induce potential points of failure). One just has to make sure that the "direct" contact entails all the little wires at the base, which can be difficult... But anyways the field formed by a group of cylindrical/adjacent conductive wires (twisted together between thumb and index), makes up for a cleaner (and more stable) signal than each little wire taken individually. It's not like each little wire contains a specific "information" (cut one and you'll still have a good _signal_).
theyre wayy cheaper noew and at the time of uur post . just incase ur interested in using; more competition once thery got popular with the mainstream.and banana plugs are great; either way works, just ask yourself: if youre gona be switching wires easily then banana; but not going banana will not mattter to the people who arent audiophiles. im an audiophile and prefer bplugs :) if tthe system is good enough to warrant them ofc.
value is king. and ebay the plugs instead of paying premiums if u can chill... unless u find good deals or want/need it now sure, brick and mortar. but you know that im sure :)
Andy Broberg
If you switch often, yeah it's a great solution, but if not... BTW It's not a matter of «to be or not to be an audiophile» lmao! That's a ludicrous marketing misperception: as mentioned in my previous post, it's essentially a simple matter of science (conductivity), period. If they get (much) cheaper, well then yes it would be a great and effective solution to contemplate seriously, when one isn't so versed into electronics soldering nor capable to effectively "twist" coper wires together (or doesn't have the "valuable" time to do so). In the mean time, there are other ways to get as good if not better contacts.
you can get banana plugs on ebay and there is many kinds but they all do the job the right way and i done work on many receiver and i never heard of a receiver losing sound just because someone use a banana plug and with a banana plug there is less change of the wires touching and causeing a short but other then that i love your video please make some more ok
Thank you. If you haven't already...please check out our website and/or like our Facebook page. We try to post relevant electronics information and tips there too.
I wonder if someone could help me with this problem. I connected audio out with a component pair from a new tv to an old amplifer. I tried using the input for tape, dvd, sat. etc and then set the amplifer for those settings but get no sound! Help Don R
Donald Ramsthel same issue
Might have to set tv to external setup in tv options.
What year is it made out of 1950
where is hdmi switch. how do i select hdmi inputs on amp
You should have a source (ie: HDMI) or input selector button (knob) on the front of the receiver and on the remote control of the receiver
I need to know how to connect my onkyo receiver to my fire stick n into my vizio tv?
I also have HDMI ports on the receiver.
makes you wonder why only 95 TD
Hi there my friend, I've Recently bought myself a BRAND NEW Old Stock (never opened) in the box DENON AVR-3300. Was SO happy. I thought "No HDMI's but it's cool, I can connect my PS4 to my TV, then i can connect my PS4 to my DENON using my Digital Optical Cable" Now, this doesn't mean for one second that I'm not a COMPLETE Anus. I'm brand new to the sound world. ANd Video obvious, is a NON HDMI amplifier dead in the water wen it comes to PS4 and HDMI TV? Thank you (Please give me good news, Or I'm afrad I'm going to have to do what my wife keeps asking me to do, and that is to walk into the Ocean wearing the Brand new Concrete Boots she bought me as an anniversary present.
Subbed as your channel has helped me before! Thank you
If you can use optical use it. The boots? We are a channel about electronics but the boots sound (pun intended) really not good.
Can you provide a little more information such as the make and model of the receiver and the sub woofer? We don't recommend you make that connection you've described because based on the information you've provided you are potentially asking about something that seems outside the design and intent of both pieces of equipment.
Do you have any HDMI cables Dollar Store not preferable yes mostly the same good luck old school and new school it's learning how to separate the wires get yourself an old-school HDMI cable
Correction on HDMI - High-Definition Multimedia Interface not input
how to connect ecolizer on this yamaha emp whit no pre in and no pre out
Magic are parametric we can go there so many bands.
👍👍
what is the name of that reciever/ amp
That's a Yahama receiver don't know which model though
Can I use a receiver and hook it up to my pc?
you will need a mixer
not a huge one a 50 dollar mixer will do
I have a 12 channel mixer connected to my pc
everything is connected to my mixer
Yes np
**HDMI (High-Definition Multimedia Interface)
pretty much means the same thing Josh ,INPUT and interface ,input being more pc a title and interface was for tvs ,,,but manufactuers use both terms ,,,,,
I have a Pioneer VSX-504S it has no HDMI ports. I am trying to connect it to my Element 55" E4SW5518 smart TV. My receiver has no optical plugs either. Element Tech says I should be able to purchase some kind of converter for the receiver to change the receiver plugins to optical on the other side to fit into the optical plug on the TV. Is this possible. I have Bose speakers and I would really like to be able to use my surround sound. thanks
Short answer? Yes.
Longer answer? Our opinion: that by purchasing such a device you might not be fully happy with the purchase because the signal limitations could prove to be significant. In certain situations you'd hear sound but not in a true surround sound format and in other situations you likely still won't hear sound.
so what would be your advice? a new receiver?
could we use a converter for a HDMI and connect that way. Elements display only shows for the optical plug for sound
Based on the information you've provided what we would consider is a newer AV Receiver having a Toslink Optical input (at minimum)
thank you, I knew that would be your answer but just needed to confirm I also came up with the same conclusion. thanks
banana plugs degrade the sound? well terminated cables with plugs are oksygen free which is better than a normal speaker cable because the metal can get rusty
How do I run my old Dell computer through my recently purchased Denon AVR 3802 receiver i only want to play some of the 2000 songs stored on my computer through my Amp......Please help....:)
Red white to earphones any cable that are headphones take your computer cable split left to right red and white all right subtle form use any computer Jack they are usually green he wants around it's not going to work it can but I'm not going to do that for you sorry my friend I did not mean to be ignorant PC component cable red and white to computer cable I make them all time take your time by a spare cut it a little bit each end the thing you must understand this nervous only two ends and the ground don't confuse yourself if there's more or less then to daycare computer green cable caught softly there should be two and maybe a ground that simple sorry you choose on let me explain to you
It's not my channel
What? So many connections
hdmi stands for high definition multimedia interconnect, not input.
4:00
4:20... blaze it.
banana plugs DO NOT DEGRADE THE SOUND AT ALL I HAVE 2 RECEIVER HOOKED UP BOTH USEING BANANA PLUGS AND THE SOUND HAS NOT DROP AT ALL IN 2 YEARS THAT STATEMENT IS I00/000 BULL COOKIES
For better sound never use av but dac to pre amp with tube then to cross over to power amp..base is most important so use nothing mid frequency base as well as low frequency supersonic upto10 hz setup....welcome to natural sound system setup...
HDMI= High Definition Multimedia Interface (bidirectional acting)
HDMI
Red on Black ok Jack
Good tutorial, but- buy better quality cables,and a heavier gauge speaker wire. I disagree with 18 G wire, a min of 16 and even better is 12 for long runs.
Plz watch it may help
Composite Video
😎🔈🔉
Not input it’s interface
Pssst.... Hint: Buy a system that offers HDMI
if you see a system like this,, don't buy it
Buy a system that offers HDMI
HDMI connecting offers TOP Sound and PICTURE also works with 3D systems
+John Smith For audio, should someone use hdmi or optical?
+kepoman_94 Go for HDMI, because its more common than optical.
Nobody uses 3d media
:
s video is dead and burried.