How to use a pantograph - Wonder Art & Magnifier

Sdílet
Vložit
  • čas přidán 23. 08. 2024
  • Get your pantograph here: www.paintbasket...
    A pantograph saves drawing time when enlarging drawings. Simple to set up and ideal for children as well as adults. A must in any art studio

Komentáře • 70

  • @ryanwuttke3422
    @ryanwuttke3422 Před rokem +1

    By far the best tool for forging signatures with an actual pen

  • @richardturner6981
    @richardturner6981 Před 5 lety +6

    Excellent video! I'm going to get an inexpensive pantograph and take photographs of buildings and make paintings of them. I knew it could be done. Thank you very much, you just created an artist.

    • @PaintBasket
      @PaintBasket  Před 5 lety +1

      good luck with your building paintings. Please post them on our forum for my feedback

    • @richardturner6981
      @richardturner6981 Před 5 lety

      @@PaintBasket Where can i purchase an inexpensive Pantograph?

    • @PaintBasket
      @PaintBasket  Před 5 lety +1

      this is the one I know of that is reasonable and good quality: paintbasket.com/go/pantograph

  • @BazzSelby
    @BazzSelby Před 3 lety +1

    When I had one, as a kid, I would hold the pointer, and trace that over the picture, as that is how it was done in the TV advert!

    • @PaintBasket
      @PaintBasket  Před 3 lety +2

      You can do it that way. Kids are taught that way around because their eye hand co-ordination isn't that good yet, but you sit with the problem of having no pressure pressing down on the pencil so doing it the other way around is better as far as that is concerned.

    • @BazzSelby
      @BazzSelby Před 3 lety +1

      @@PaintBasket True! I would put a couple of metal nuts on, to hold the pencil down.

  • @PaintBasket
    @PaintBasket  Před 12 lety +1

    @MrJohnnybobs two reasons, it's easier to hold the pencil and you then can lift the pencil up and control the pressure of the pencil on the paper

  • @antoniooviedo8889
    @antoniooviedo8889 Před 9 měsíci +2

    Fuiste Thank you

  • @aichasassi8239
    @aichasassi8239 Před 2 lety +2

    Merci pour votre démonstration. C’est clair.

  • @liammiller4758
    @liammiller4758 Před 5 lety +2

    Need one of these to modify to work with my powerplasma cutter. That would be pretty cool.

  • @crystalgillis9296
    @crystalgillis9296 Před rokem +1

    Thank you for this tutorial. It's so helpful!

  • @CBALLEN
    @CBALLEN Před 6 lety +16

    It would be helpful if it were made of clear plastic.

  • @dc2010ist
    @dc2010ist Před 10 lety +1

    I finally know how it works, I never learned it when I was small. Thank yoU! ^_^

  • @anggakmal
    @anggakmal Před 6 lety +3

    Great demo! Love it! Thank you sir.

  • @lewisdrake5765
    @lewisdrake5765 Před 6 lety +3

    I want to build a pantograph for my everlast plasma cutter. That would be really cool.

  • @Model3GenerativeANdroid
    @Model3GenerativeANdroid Před 10 měsíci

    Thank you so much for this tutorial 🥰

  • @bakedtoast278
    @bakedtoast278 Před 5 lety +3

    I was kinda confused on what was going on until I saw the other part touching the smaller picture

  • @MrSkippylen
    @MrSkippylen Před 12 lety +3

    This has been very helpfull, many thanks

  • @gomin2u
    @gomin2u Před 11 lety +2

    thanks you for helping us

  • @antoniooviedo8889
    @antoniooviedo8889 Před 9 měsíci +1

    Quiero saver como se a justa el Pantogeaph ..Won to now how can I set the tools on the table..Thank Your

    • @PaintBasket
      @PaintBasket  Před 9 měsíci

      Different brands of pantographs attach differently. Some have a clamp that grips onto the table. Mine has a block so I use some Blu-Tac to stick that end to the table.

  • @lakshmanankomathmanalath
    @lakshmanankomathmanalath Před 8 lety +2

    great. thank you.

  • @gemlameraforro9664
    @gemlameraforro9664 Před 5 lety +1

    Amazing!!!

  • @philoumars3168
    @philoumars3168 Před 6 lety +1

    What would be more precise is to "follow the lines" directly on the photo. And the pencil drawing the lines would be moved automatically. And not the contrary.

    • @PaintBasket
      @PaintBasket  Před 6 lety

      you can do it that way, but I have found that the pencil marks are often too light as there is no pressure on the pencil, hence the reason I move the pencil as opposed to the pointer.

    • @philoumars3168
      @philoumars3168 Před 6 lety +1

      PaintBasket
      Ok i understand. But there is still something I do not understand: it is difficult to see the pointer with precision. ?

    • @Luka.shrekie
      @Luka.shrekie Před 4 lety +1

      I actually put some magnetic weights rubber banded on top of the pencil and do as the comment says. :)

  • @moosasanani
    @moosasanani Před 8 lety +1

    great

  • @horokeu3310
    @horokeu3310 Před 7 lety +2

    this is very easy

    • @imeldanelmida1200
      @imeldanelmida1200 Před 6 lety

      ゼルダリスキングZeldoris Zeldris LOVER HERE TOO😍

  • @rogermcdaniel7303
    @rogermcdaniel7303 Před 8 lety +3

    Might be even better if you made the whole thing (or at LEAST the part over the image) of clear plastic so you could view the tracing scribe better and anticipate which way to move. Just sayin...

  • @lois3356
    @lois3356 Před 3 lety

    whats the song playing at 7:20 ?? really cool looks like japanese instrumental

    • @PaintBasket
      @PaintBasket  Před 3 lety

      it is a song built into the video editor I used at the time. The software was called Pinnacle Studio, so unfortunately couldn't look it up for you now, sorry Luis :(

  • @veroniquemcmurray8417
    @veroniquemcmurray8417 Před 6 lety +1

    How do you know where to put the pantograph?

    • @PaintBasket
      @PaintBasket  Před 6 lety +1

      I usually put the "stick down" part on the edge of the table then trial and error the image and drawing paper by checking the four corners of the image to ensure they fit well

  • @kambernard2012
    @kambernard2012 Před 9 lety +1

    Hi I feel this tool very good,where they sell these?

    • @PaintBasket
      @PaintBasket  Před 9 lety +1

      +kam bernard www.paintbasket.com/go/pantograph

    • @royboy3129
      @royboy3129 Před 8 lety +3

      You don't need that tool. There is a MUCH easier way. Take a pic of the picture with your phone or scan it into your computer. scale it as big as you want it and print it out.Then cover the back with charcoal rub it in with a paper towel. Turn the picture face up and tape the corners to your drawing papper so it don't move. get a mechanical pencil and trace over the image It will transfer the image onto the drawing pepper. this is a quicker and more accurate method

    • @petalp9452
      @petalp9452 Před 8 lety +3

      Quicker and more accurate, eh maybe.
      But definitely not any more cost effective.

    • @lilarosa8357
      @lilarosa8357 Před 6 lety

      Roy Boy right but you cannot modify the size

    • @doofsdoofs
      @doofsdoofs Před 2 lety

      @@royboy3129 That sounds infinitely slower

  • @rubyhunternc
    @rubyhunternc Před 6 lety +2

    What if you're right handed?

    • @PaintBasket
      @PaintBasket  Před 6 lety +3

      depending on the design, some have reversible pins making them work for left and right handers. Other designs have a left and right hand model.

    • @rubyhunternc
      @rubyhunternc Před 6 lety +1

      Thank you.

  • @arifkeeerrreeennnmgoodgood1709

    I like it

  • @rubyhunternc
    @rubyhunternc Před 6 lety +1

    Can you make an enlargement to a 16 X 20 canvas?

    • @PaintBasket
      @PaintBasket  Před 6 lety +1

      you can enlarge in increments, so if your picture is proportional, then it will enlarge to a 16"x20" canvas no problem

    • @rubyhunternc
      @rubyhunternc Před 6 lety +1

      Thank you.

  • @marklinsdell7527
    @marklinsdell7527 Před 4 lety

    i take it you can see more from your angel mate, as from here i cant see how you can follow the lines with something in the way

    • @PaintBasket
      @PaintBasket  Před 4 lety

      that is correct, you can see my head is to the side so I can see the pointer on the pantograph perfectly

  • @mazharbutt5712
    @mazharbutt5712 Před 6 lety +1

    how to get same saize drawing sir?

    • @PaintBasket
      @PaintBasket  Před 6 lety +2

      the pantograph has several settings for different sizes, including a 1:1 option

  • @jumanas4012
    @jumanas4012 Před 4 lety

    how do you know that number you put it on ?

    • @PaintBasket
      @PaintBasket  Před 4 lety

      the number is the amount of magnification you want so 1 is a 1:1 redraw, 2 is a double size, etc.

  • @marklinsdell7527
    @marklinsdell7527 Před 4 lety

    i thiught you controlled it from the original point then the scale up point drew itself

    • @PaintBasket
      @PaintBasket  Před 4 lety +1

      you move the pencil so that you can control the pressure on the paper. You don't however look at the pencil as you draw, you look at the pointer on the pantograph, which is on the reference photo.

  • @user-nq7jr3ew3d
    @user-nq7jr3ew3d Před 9 lety

    клас

  • @narcovice
    @narcovice Před 7 lety

    guess thats what he means by drawing magnifier

    • @PaintBasket
      @PaintBasket  Před 7 lety

      Ronald, yes, I would call it enlarger (Pantograph) as that is what it actually does,
      although a magnifier does that also. I personally would not call it a
      magnifier but the trade name was used, nl, "Wonder Art and Magnifier".

    • @yueliu4690
      @yueliu4690 Před 7 lety

      ronald ferreira and