Painting Jinx from League of Legends (3D Printed)
Vložit
- čas přidán 24. 04. 2024
- I 3d printed Jinx from league of legends and painted her in this video using acrylic model paints.
Model available here: / ca3d
The Printer: Uniformation GK two : www.uniformation3d.com/produc...
Get $80 off when you use Code: ground
Or here's the Amazon link: amzn.to/3wgaDrk (Unfortunately, no discount code for this)
⭐️Support this channel on Patreon and receive exclusive and behind the scenes additional content: / groundeffected
⭐️ For more videos like this:
/ groundeffected
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ US Amazon LIST:
Tools and materials used:
▪️ Hobby knife: amzn.to/3wBFKxP
▪️ Tweezers: amzn.to/48IAd60
▪️ Sprue nipper: amzn.to/3TfYGL9
▪️ Needle nose pliers: amzn.to/3SPogW4
▪️ CA Accelerator: amzn.to/3UYxj9P
▪️ Big bottle super glue: amzn.to/3SWfyp8
▪️ Masking tape: amzn.to/49Np58w
▪️ Better memory stick for your printer: amzn.to/49NprvS
▪️ Aligator clip with wire: amzn.to/49KgUdu
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
Paints:
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
🖌️ UK Amazon LIST:
Tools and materials used:
▪️ Hobby knife: amzn.to/3P3Z8dc
▪️ Tweezers: amzn.to/3P2HFl9
▪️ Sprue nipper: amzn.to/49WIp3v
▪️ Needle nose pliers: amzn.to/48zj5PV
▪️ Accelerator: amzn.to/3uHy0tD
▪️ Superglue: amzn.to/4bPD6ol
▪️ Masking tape: amzn.to/3wHw6tf
▪️ Better memory stick for your printer: amzn.to/3Ij13qr
▪️ Crocodile clips with stick: amzn.to/49NeYRT
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How to Paint 3D Prints, How to Paint 3D Printed Parts, How to Paint Models, Model Making Techniques, Model Building Tips, 3D Printing Ideas, 3D Printer, Easy Painting Techniques, Painting Miniatures, 3D Printing, LED Lighting Effects, Follow Along Painting, 3D Sculptures, Finishing 3D Printed Parts
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my CZcams channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - Jak na to + styl
Also loving the Ending Credit song ! ! ! ! !
i want that bloody awsome song to play while i paint mine
i wanted to print and paint her and saw your video now i'm kind of encouraged and discouraged at the same time 😂
Do it dude!!
You’ll never be as good as him but you might become the best version of yourself 😂
Extremely interesting, entertaining and funny too!
ca3d gets the character's likeness almost every time.
Words in the little square box, love the finished model. Fantastic work, makes me want to watch Arcane again :)
You’re an amazing painter! I love watching your videos!
Awesome paint job 🧨 and The end song 🤟
Love your videos but this one has to be one of my favorites so far. I just like your commentary on your own work. It felt real and funny especially notating mistakes or hurdles. “I could have used magnets but I didn’t so there”. “I decided to stop the hair for some reason and work on the boots - oh look past me has gone back to the hair”. Very enjoyable. Thanks for the video. I like that you did Jinx as she is bit different from your usual models. I would love to see how you use your latest paint styles on anime figures one day.
I dig the bold black outlines, gives it a cell-shaded feel to it without being overly "in yo face!" about it
Holy shit...the end credits song Rocks!
The Music 🔥The paint job🔥
Awesome video as always.
Dude, the new song is incredible. Rock on!
Nice jam at the end! 🤘🏼
OMG the music is so good!
You have to get that end credit track it's own video!
Man, you know you gonna have a good time when the Paintgod himself Uploads a new Video!
It’s always a pleasure my man.
I printed the bust, loved it, I tried the blue wash that people are doing, didn't really work because she's such a punky purple, so I printed another lol
Great song!
Insane work as usual!
love you work you have knock awesome video out of the park. keep them coming. Milan from Indianapolis In USA
Amazing paintjob. I love watching you work.
Thank you 🙏
Love the music on this video , very clever hahaha. Great painting as always also.
Há algum tempo o CZcams me sugeriu vídeos de impressão e pintura 3D. Assisti vários vídeos de diferentes artistas e diferentes estilos. É ótimo vê-los no final do processo. Todos esses artistas conquistaram meu respeito pela grande capacidade de criá-los.
Então o CZcams sugeriu seu vídeo "Triangle of Difficulty- (Yellow, Skintone, Eyes) How To Paint 3D Prints". Até o momento, você foi o único que realmente me impressionou.
Saudações do Brasil.
WORDS!!!
Stunning work!! Thanks for sharing.
amazing
Beautiful work as always!
Stunning painting process and model!
Looks fantastic!
This is incredible, well done.
That is one sweet build!!
Awesome work my guy!
👍👍 on the 3d print theme music!
This was a sick video 🔥 and the 3D printing song slaps!
amazing 🥰
Love the ai music usage lol. Model looks great as usual!
Haha couldn’t resist. It’s so funny but annoyingly good
@Groundeffected it's crazy how good ai music comes out. Just waiting til I can ask ai to generate me whatever figure that I want and make it look good, then print it. Won't be long
Woot, first video on the Patreon List. Amazing work. Gran Approved.
great job!
Absolutely love the job you made of this model. Might try myself at some point but lot of work involved there
It’s daunting but if you take the lazy way like me it wasn’t too much to be honest. It’s a cool model I like the colours
The 3d print song! Tho🔥🔥🔥🤘🏻😝🤘🏻
Great video as always. This model turned out amazing. Awesome job brother 🤘🏼
Thanks for watching dude
Your talent is amazing!
Thank you.
Custom groundeffected rap song🤔 lol great vid
That was pretty cool Metallica like song about models. I smiled listening to lyrics.
Nice one looks sweet I aspire to be just as good and the tune is awesome lol
You're a trip! I love visiting with you.
Amazing video. Love the ending song.
Haha I thought it might prick up some ears 😂
Pinkle, Deck Tan and now Pair of Tooth! Love your channel! Just great content love your song too.
Bruh. A pair of tooth is the worst!
Not sure how fast you actually work but this was awesome to see. Another banger!!
Uh. My timescale is a bit crazy. Usually start on a Saturday and by Monday night I aim to be done to do a rough cut of the video so that I have Tuesday to support and start printing the next one Wednesday video voice over and thumbnail etc and Thursday’s and Fridays I tattoo it’s a wild ride haha
Very nice!!!🎉
Thanks!!
YAAASS! I so want to paint this model!
Loooove the music!!!
I love the song at the end. Who is the artist so i can listen to more from them
Good job
Cool figure painting ist Superb
Thanks my dude
Excellent work as usual Brent! Is it wrong that my fav part was the sticking plaster on her knee? I just love that bit! Eyes man...I have to wear HUGE magnifying glasses now for those.
Love the song btw, is that an AI generated one just for you?
👍
Yes dude. I had the reveal song made by ai out of my dopey words haha
fuckin love the sound track
Your theme song goes so hard.
ive watched a few of your painting videos. I only have an FDM printer. Have you ever tried printing one of these figures in an FDM instead of a SLA resin printer?
Dad, do you know how to read minds or why is it that you always print and paint models I'm about to do ?!
Great job as always !
Amazing paint job! Love the song too! As others have mentioned, would love to see a link to the song posted so we can enjoy in its full glory.
Ok ok. I’ll see what I can do.
Did you find a link? I want to jam out please@@Groundeffected
lol I love the song in this one.
Haha
Bro, do a Swamp Thing. I just am starting to wrap up the print. I am wondering how to approach it.
I like the fire on the base, but the zenithal over black makes the yellow look green. I think a zenithal over a deep magenta would really pop those darker parts of the yellow into orange and the orange into red and so on.
To be honest I would agree for most cases with fire but in this model I wanted to keep the base a bit darker and desaturated vs the figure. And the fire is more smokey kinda i didn’t really show it nicely but the OSL lights up better from the side.
@@Groundeffected fair point, you want the focus up on the figure and the top 1/3 of the figure at that. Looks great, I have to get that CA3D Patreon soon
Love the song. From your dad
I love the song. Who does perform that?
It’s an ai song that I made out of some silly words I made up 😂
every video you get better. I need to get better!
Go in get better dude!! You can do it
did you print at original size or did you enlarge it thanks awesome job
I usually print at the scale I get it in. Mostly 1/6th but scale is a funny thing and is different between artists so some seem small and some seem big but on average I print in 1/6th and sometimes in 1/4
I'm loving the song, can we all adopt it?
Niiiiice 👍
Thaaaaanks
Hi there. Do you apply a varnish before masking with tape?
Could you list all the paint brands you used on this?
What do you think about Elegoo Saturn 3 Ultra?
You said letting matt varnish rest and cure before continuing. How long did that take? Overnight?
It doesn’t have to be but for safety I do the varnish at the end of the day then when I get in in the morning it’s good to go anyway. A couple hours is usually fine but better safe than sorry I guess.
ummm 3D printing metal song?!?!?! link to it?
I’ll post it gimme a few days
You from SA mate?
How do you decide when to use an ink.
If I want to see some colours underneath or if I just want a bright saturated version of certain colours sometimes ink is better because it will be dark in the dark parts and bright over the white parts of a zenithal.
Nah, My Dad has Intro Music NOW!!😂😂 let's go!
Can you tell me what type of printer you are using?
Sure it’s a resin printer. Specifically it’s a Uniformation gktwo there is a link in my description that can show you all the information about it ( it is an affiliate link I have to tell you that haha)
@@Groundeffected oh sorry I didn't notice and thank you
🤩🤩I made her a snack! ...Sheesh, I'm not that crazy.🤩🤩
Excellent job.
Not a fan of sculpted "smoke" though. It lloks like that rocket has a trail made of rocket poop. =)
You are a ledged bud...!!!
I'm working on a french Shrek 40k kill team (baguette chain swords and such) , would you like some ?
Edit: free 3d STL files I mean
5th 😮
whats the song called ?
I haven’t given it a name haha
What if I wear 4x reading glasses all the time? Do I need to use 8x then? Bi-Focals suck !!!
Que se siente que eso fue hace 4 años que nadie sabe quienes son y que a nadie le importe?
typing words in the not so square box...
Just Mentioning 69K
I see your Dad, I press Like 👍
I like that you press like 👍🏻
I hear suno.
That’s a solidly good ear you have my dude
why is jinx's chest so big, realistically, she is flat as a board
typed words
Splendid!
wait wait, jinx with boobs?, that is new.
1st :)
Give us the song( at least name/ who made it) or I will start spamming on your instagram until you give the song.
Sounds ai. Suno, most likely. He said he would post it in a few days.
It's hilarious! I like that it says "my names your dad", lolokok
It is an ai song. You can make your own of course. But I will post this one in a few days. Also did you notice the one near the beginning?
@Groundeffected I will rewatch to listen for it. How many tries before you got the song you liked? I love having it make up on the fly songs for random stuff I see.
@@demijebus6831 a good few tries hahaha lots of wasted credits lol some were terrible some cool but some sucked so bad.
song goes hard
is this where the words go?