Flying At Fritz Field 22 March 2024 Tomcat Down
Vložit
- čas přidán 23. 03. 2024
- Made some adjustments to the wing sweep and double checked everything, ready for another test flight. Before I tried another take off, I asked one of our most experienced club member to remaiden the Freewing F-14. Unfortunately the issue with the ESC, continued and then one of the wings decided to sweep forward on its own. So one of my favorite models was lost crashed. Not a cheap weekend...
Royalty Free Music from Kevin McLeod - Věda a technologie
Freewing is having quality control issues with electronics lately. My F-16 ESC burned out mid-air and the plane dove straight into the ground. This was after 9 successful and stable flights over several weeks. MotionRC won't do anything about it. You are not the only 64mm F-14 to crash. I suspect this model will have a lot of problems going forward.
Just by the take off, I could you were going to have problems
Very sorry for your loss, That one wing swept forward and other stayed back was more than any RC Pilot could handle no matter haw good they are, We lost a real B-1B Bomber back in 1985 when I was in the Airforce because of the same issue, Most of that crew died. It was a very sad day.
The real F-14 could handle it so i guess that's not compareable. Btw: What was this takeoff? o.0
You’re like the second person that happened too 😢 man sorry about ur crash
There seems to be a rash of these uncontrollable new 64mm F-14 crashes. The wing sweep seems to be the cause in this one. I'm not sure if it has been identified in the other crashes I've viewed on YT yet or not. Someone had a nose-dive when changing from 1/2 flaps back to no flaps. On the 80mm F-14 there was always the danger and note to make sure the flaps were UP before swinging the wings back, and mixes were in place to make sure that happens. It's easy to see how a stuck flap could alter the symmetry of the wing sweep. Is it possible any of that is going on with this 64mm F-14?
I mentioned on another video that the swing wing servos are "constantly" under a heavy load. This looks like the end result ?
The real F14 may have been able to do that and fly fine but I can’t imagine the RC version was at all controllable at that point. I mean, the best RC pilot I’ve ever seen was at the controls. I’m still trying to figure out how that happened. Was it an uncommanded wing sweep back or forward on one wing? Or was the sweep switch flipped and one wing didn’t do what is was supposed to do?
That was a cg issue. You could see it right from the takeoff. Jet was way too nose heavy
How does that cause the one wing to sweep Forward?
Sorry bud im hearing alot about thise wing rods and if there not put in right. I havent maiden mine yet so i think im going to recheck them. That sucks for a $500 buck plane
I think I’ve seen way more crashes of this new F-14 than any other rc model ever.
Important..im not at NAS anymore and need to let Fred and his wife know how kind and thoughtful they are...please let them know i said ❤ and used Jesus name. Thanks. PS your channel rocks !!!
Fred and Denise says, thank you and wish you the best.
Probably didn't put the ball links connectors on the right direction, if they snapped on easy then it's wrong
I have been hearing this alot and I looked over mine and they seem very snug, but I looked threw the manual they dont even mention anything about installing the rods. So if there is a issue with them coming off that is on MotionRc bc even in Wes video he only shows he puts them on and doesnt say a word about the size of the holes in the ball joint clevis.
@DronemanJoeRc I have one and I think what I'm going to do is take the screws that are holding the balls on off and put a big washer on them so will keep the connector from popping off the ball
This happened to me with the Twin 80mm version when they first came out. I'm disappointed that they used cheap plastic clevices to connect the swing wing mechanism on this one. Very soft and this is likely going to happen over time 😕
No. It won't. The only time you risk breaking that clevis is when ,on landing or takeoff, you have a very strong wing strike on the runway or grass.
@frank-vq4mx Not true. My metal clevice failed in flight on my twin 80mm. Broke in the air
Hey Johnny, Bummer Dude. RU on the RCGroups by chance ? I'd like chat with you if so.
Not actively, you can message me on fb or IG @agentnot007
One of the wing stayed closed
Other way around, the pass was with the wings swept. One then opened on its own. Control rods were still connected after crash.
How did goose’s wife take the news this time ?
probably crashed because you had the wrong theme song music playing lol Should be playing final countdown! Please stop the injustice and stop playing top gun every single time an F14 flys lol
Cheap Chinese quality.
Sorry about the crash! Attempted to contact you via fb (unable to find you) and instagram (last post 2022). Any other way to contact you to talk about parts