Radiolink T8S FHSS 8CH Transmitter Bluetooth & Receiver - Review Part 1 Test Flight
Vložit
- čas přidán 18. 08. 2024
- Get One Here: Radiolink T8S FHSS 8CH Mode2 Bluetooth Version
www.radiolink....
Radiolink T8S FHSS 8CH Mode2 RC Handle Transmitter Bluetooth Version with Receiver - Review Part 1 Best Cheapest?
This Transmitter & Receiver are courtesy of RadioLink.
I want to thank RadioLink for sending this item for Review.
Banggood GCRC
www.banggood.c...
You can help support us by using our affiliate links to the products above. A small commission (At No Cost To You) helps us buy more items to review.
#GroundControlRC #GlueAndFly #GFS #GCRC #ScratchBuildPlanes #RadioLinkT8S #T8STransmitter #T8S
See you in the Air!
Build, Fly, Crash, Repair, Rinse & Repeat!
Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes
Consider Supporting Our Channel by becoming a Patron at: / groundcontrolrc
Patrons of the Channel will have access to the latest Aircraft Plans & Exclusive Content!
See Us On CZcams | Patreon | RCGroups | Facebook
/ groundcontrolrc
/ groundcontrolrc
www.rcgroups.c...
/ posts
Legal
Ground Control RC™ and "Glue and Fly™" Series Aircraft. All rights reserved. Publication, reproduction or distribution of this Video/Media by any means whatsoever, including but not limited to, electronic transmission via internet or e-mail, re-uploading existing Videos/Media on any other website is strictly prohibited without the prior written consent of Ground Control RC. We are not directly affiliated with any of the vendors or manufacturers that may be referenced in our videos. Ground Control RC is not liable for any damage or loss through the use of products or techniques shown in any of our Videos/Media and you do so at your own risk! This Video/Media and all Ground Control RC Videos/Media are intended for entertainment purposes only. - Zábava
Hi my friend :) i would like to know wich ones are your favorites rc planes. I miss the p51 series
Hi Jon! I have a hard time sorting that out ;-) As far as Factory Planes go, I would have to say the Fun Cub 1100 Kit is my favorite Factory Plane so far. That's one of my Largest Planes. Then I would have to say my 2nd favorite Factory Plane is the Volantex Sport Cub 500. That's one of my Smallest Planes ;-) In 3rd place, it's kind of a toss up between the Volantex Ranger G2 (One of my Largest Planes) and the Eachine Mini Mustang (One of my Smallest Planes). Hehehe...I like them all but I'd have to say those are my Top 3. I miss that P51 as well. I'm almost finished with Reviews and then I'll have time to take other planes out including the P51 ;-) See you in the Air!
Hello Ground control, When are you going to review the V710 receiver? Noticed you mentioned it on Banggood! I'm particularly interested in its suitability for the Radiomaster Tx16s. P.S. still doing great with my sports cub 500, I'm actually flying in expert mode now! Just... :)
Hi Leo! I wish I could tell you ;-) I have so many components to test, servos, receiver, ESCs, Motors, Props, etc. I'm trying to get caught up before the next Aircraft arrives ;-) And get my T-33 Micro Prototype all dialed-in ;-) I have one of the V710 Receivers installed in something.....I think in the Eachine Airloader! I know I haven't had any problems with it and I like those 7CH Receivers. That comes in handy for things like Flaps, which I haven't gotten to yet ;-) I have it setup on either the Devo 8S or the TX16S, I can't remember which but If it will bind to one it will bind to the other. The Holidays have really pushed things back. I'm glad you're having fun with that Awesome Micro Plane! If you're flying in Expert Mode then I know you're having a lot of fun ;-) See you in the Air!
@@GroundControlRC Thanks mate!
what app are you using to adjust the expo droid here
Hi Brad!
I'm using the Android App I downloaded from the Radiolink Website.
I've also used the Windows App.
www.radiolink.com/t8s_firmwares
Interesting. Being old school raised on Futaba transmitters and not gaming consoles, I find the game-controller style TX's uncomfortable.
People well familiar with Xbox and Playstation playtime will probably find it fitting them like a glove. The angled sides throw me off though as they place my hands at unfamiliar angles, and I end up moving the sticks improperly and off-axis. I have the same problems with the similar Spektrum/Blade/Eflite transmitters that come with RTF aircraft.
Seems like a nice TX , but not for this old fart.
"I think it was 28 degrees out...."
I'm resisting going out to fly because I'm seeing low 50's. Call me "wuss". ;-) Dang California living.
Happy flying!
Yeah, it's a bit difficult for me as well. Other than those Micro RTF Models I always use a full size TX and that's what I'm used to using. It's going to take a few flights to get comfortable with it and I do need to setup my DR & EXPO differently for this TX. It has nice smooth gimbals but not quite the resolution I'm used to having. Did you say 50's temperature wise? Yeah, I'd be flying in that for sure ;-) See you in the Air!
How do i set up my radiolink A560 so that the ailerons are less sensitive?
Hi Jason!
I discovered that all the Dual-Rates were at 100% with no EXPO on the stock setup.
I lowered the Dual-Rate on mine and added 40% EXPO if I remember correctly.
I posted my Model File for the T8S Transmitter on our Facebook Page for download.
You can download that file and load it into the T8S to test out my Setup and see if that works for you.
I really like the way it handles in Acro Mode with that setup and I'm having a blast with it ;-)
See you in the Air!
@@GroundControlRC thanks for your reply,don't suppose you have a video on how to add the file to controller?
@@jasonsuffolk Hi Jason,
No I don't, but in the programming application you can load your model file, so all you have to do is save the model file on your computer and select that file from the software app.
I did produce a couple of review videos on the bluetooth version of this transmitter that might be helpful and there is also a couple of very good videos that ReadioLink produced.
Here are the links:
czcams.com/video/23HShdin0uc/video.html
czcams.com/video/ZGmzcHQm37s/video.html
RadioLink Video for Installing the App and Software Introduction
czcams.com/video/lamZCUFXFbU/video.html
GCRC RadioLink T8S Transmitter Calibration and Aircraft Setup
czcams.com/video/23HShdin0uc/video.html
@@GroundControlRC Hi,i just noticed my ch3 is set to reverse and the expo is -100 is that correct setting for that channel ?
@@jasonsuffolk Yes, for some reason the Throttle Channel on that TX needs to be reversed, although, I don't know why there would be any EXPO on the Throttle Channel.
Hi my friend, I would to tel you if I can use this radiocommande to control 7 servomoteur and 1 dc motor, so as the dc motor and servomoteur can run in 2 directions. Thank you.
Hi Khelifi! Yes, you could use this Transmitter and 8CH Receiver to control 7 servos and 1 motor. I hope that helps. See you in the Air!
Thank you very much for this confirmation, so tel me if each channel can control his servo or motor in the two directions.
@@khelifihebbache8032 I'm not sure what you mean by two directions? You can change the channel of the servo from Normal or Reverse so you can change the direction of each Servo. The motors whether Brushed or Brushless would need an ESC to control the Motors. The wiring of the Motor would determine the direction the Motor spins.
@@GroundControlRC please what is her distance control.
@@khelifihebbache8032 It depends on the Receiver but the one that I received with the transmitter is rated for 1km and they also have receivers that are rated for 2km. They seem to work very well but I fly close proximity so I've only have it out around 200 meters.
Is this multi-protocal?
Hi Dave!
This TX only supports Radiolink Protocol.