over 25,000 is what it cost not worth it when u can built a engine cheaper and a lot faster . then u have me i have 2300 in a 68 pu all that is left is final paint and interior running a stroked 454 with tunnel ram steel crank heavy rods heavy duty 400 turbo and still have the fresh rebuilt 327 and the stock trans 400 turbo that came with the truck and the 2300 is counting the cost of the truck but i have a secret on getting low mile crate engines for cheap or free the 68 454 has only 6000 miles on it and stock the engine had 450 hp at 485 torque so far i got 2 for free with the heavy duty 400 turbo but i get a lot of engines free like right now i am trading a low mile 350 4 bolt for a worn out 2018 l.s.7 427 got the 350 for free and the l.s.7 is a way better engine then any coyote engine stock it has 860 hp . u will find that most shops will put in a used engine in there build hop it up a little make it look fresh this way they can make money on the build so far i have saved over 15,000 on my build and it is just as good if not better because i know for a fact that it is a good engine no break in problems after 6000 miles u know it is good . i get these engine from a place know body ever thinks of and i get only bb chevy , fords and mopars all performance crate engines so far they all been free to me
I dont mean to be off topic but does any of you know of a method to get back into an Instagram account?? I was stupid lost my login password. I would love any tricks you can give me
@Kasen Thiago Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later with my results.
Hi you might have seen my car. It was something my son wanted me to do a coyote swap to. I’m trying to find a place in my life where it doesn’t hurt. I lost my youngest son and my world exploded. Watching your videos helps me meditate. I might end up doing this. I built every inch of the Capri myself, The hard way , Alone in my garage, Took 9 years, I’m thinking about doing a swap in memory of my son. I just wanted to say thank you for your videos.
I decided to just EFI a old motor. Edelbrock Pro Flow EFI on a 348 stroker will be plenty for me 😎. These new EFI systems work so well these days it’s hard for me to throw lots of money at a Coyote. It’s not hard to get the 420hp from a 348 and the EFI will definitely boost the mpg
@@Ruby5.0 Still rather have a sbf in my car. There's only two front suspension choices I go with to run a coyote swap. MMI & DSE. Both would cost a lot of money. To end up with less HP than my sbf makes.
Just got 93 GT, for sure a long project! My dream is buying a wrecked 18-22 gt350 or gt500 and stuff all the goodies I can into the fox. Glad I was able to get the first step done this year.
Great topic and detail. Pretty much nailed everything on the head. It definitely is a loaded question, because it's really not that simple. A full swap of 12k may not be the same as another; could be a lot higher, depending on alterations and options you want. For me even after a year of research, I was still way off (short) on how much it cost me to swap my 94 Cobra.
Thanks for the video. Man look forward to seeing this car when it’s done. I did a terminator swap. Dude love it. Swaps on the either motor is just cool! And it’s the way to go for the daily guy or track guy with these. It all goes to what do u want in your car. Keep the videos coming. Going to be setting me up a channel soon for mine.
I agree with several comments concerning the random comments. It’s pretty good inform but rambles and somewhat gets off task at times. Takes too long at times to get the information across. And in the end did he really answer the question or dance around it. It’s easy to go to the high end but most people want to know how can you do it or if you can and be somewhat cost effective.
Honestly a lot cheaper than I thought it would be... I’m currently looking into purchasing a 67’ fastback and putting a cayote engine swap in it (or a newer engine) and then doing up the suspension, breaks etc. Thought a full swap would cost insanely more
The real question is gonna be, is it worth it? But you can’t answer that yet lolz. This hobby/sport/game, requires pay to play. If it’s too expensive for someone, then this isn’t for them. Build something old school and go fast like that. Don’t get me wrong, I’d like to coyote swap my 06 but I’m building a house right now. Priorities comes first. It’s highly appreciated that you tackled the big question everyone has. It is a hard question to answer, especially because there is no one answer to it. Sub’d and can’t wait til she’s done
I stopped 4 mins in.You started with,'there are 2 questions'1 what do you have,and 2. what do you want"?/I want to know how much a Coyote,with ECU.That is WHAT the question was.You are very smart,and I can relate, as you extrapolate the entire system I can see your eyes moving as your brain skips about through systems.
if your true to hot rodding the cost while a major factor is nothing compared to the smile on your face when it's done and you do with it what you built it for, be whatever that may, plus opening the hood and watching someone's jaw drop is alway's fun lol
You just have to look for good deals on parts, do all the work yourself, even trade/barter for stuff. It can be done cheap if you know what your doing. I’m doing one now and I’m doing it as cheap as I can. Got my hydroboost stuff all from junkyard cheap.
justin91lx Ellamore already has the kit to complete that transition. So you’re right in a couple years it will be cheaper and the motors will be cheaper . If I ever change my motor which most likely I won’t because my car is clean as hell . I would buy a boss 302 with the heads on the factory boss 302 . That 7000 for that motor . And you could probably get an aluminator cheaper in a coupe years , but remember when they stop making certain things the prices go way high . Especially when it’s discontinued Ford racing parts
It cost me 12 to do mine and I coyote swapped an 87 Ranger and I'm looking to put a coyote in a Ford Fairlane when I buy it to be in the next month or two
It really depends on how much knowhow you have yourself. I personally would not spend that much swapping a coyote engine. I would just build a 434 Windsor with a passenger block.
First launch you'll probably break a T5 with a bone stock Coyote, not worth it when you have pieces flying everywhere. You're doing it right by getting a stronger transmission but kudos to you for staying stick
Greg V T5 are a very finicky animal. I have munched them on stock tires and stock motor. I have friends damn near pick the tires off the ground with one.
It cost a lot. U can buy a 2011 or 2012 GT for less probably. I just bought a 2012 GT for 15k and it has 69k Miles. A motor control pack the power steering bracket and ecu. Trans stuff. Yes. It cost a lot. But if u have the car and the money. I say go ahead and do it. Love to do my 98 gt but I seen this 2012 GT and went with that and I didn't have to wait.
This sounds all too familiar. When I was a kid, I had a couple of old Mustangs. I had one in particular that was a 68 that I was going OCD on in restoring with an eye for higher performance. Money just went and went and there was still more to buy. Here's the crux: Back then, there was no high end muscle car market. An old pos Mustang coupe could be found for well less than a thousand. A fastback for about 40%+ or more. You could easily dump a couple grand into it and you would not be likely to sell it for anywhere near what you had in it. By the time the late 90s rolled around, the market started to change. You know what these things are worth now, especially the Machs and GTs....
Well from my experience 95% of people that ask how much !!! do not have the $$$$ to even attempt to start on this project or that goes for any project. Sad to say but true oh and keep up the good work bud
I feel like if you have a new edge with a 3650 already in it you could get this done for much cheaper. Even a reman 3650 is only about 800 bucks in my area
Audience I'll just put a 4.6L terminator motor in my Fox, if I decided to do a swap. Now LS motors are cool, but I don't want to waste a ton of $$$. I'm retiring in 3 years, and love my procharged stroker Fox with ALL the bells and whistle. I also own a 2004 mystic chrome teriminator, both are immaculate...Yikes lol
In a harley f150, it would use the same motor mounts, transmission mount bery little fab work and just hook all the wires and e-fans and fuel system and you're golden
So I was thinking of just buying a 15+ donor car off copart. That was at least you have a motor and trans and can go from there. I want power steering and a/c. But even then spending all that money could just be a big down payment on a brand new gt. I'm just not sure
good honest answer also need to know if they want the 11-14yr or 15-18 little bit of price diff. would like to know what you think of these used master kits on ebay ? I have 98 gt and wanting to do a swap I have a AJE k member orderd I hear 4.6 engine mounts will work or should I start with a crate motor and control pack some of them master kits seem to have everything
I just bought a 56 f100 want to put a fuel injected motor in it not a racer just a cruiser but would like to put a 5.0 in it of course transmission to go with it and a real to go with it what would recommend
Would be good, if when you release the PDF file you have a reference section for what video(s) have that particular part in them. You put out so much content, that figure people going back, are going to have a hard time going through months and months of 15 min videos 5 days a week... I've been keeping notes of a few refetence.viseos for certain parts myself
Every1 is so negative about how much. When I dropped off my car I asked how much to make sure I had plenty to pay for it. I researched it and knew about how much. I prefer to ask how much so when they call I have the $ Living in South Florida I can't pull an engine and put a new 1 in. The HOA hates it. They hate me cause my W2 is way less than what I make. So I keep it easy.
You gave valuable info but you made it sound a little too difficult. Just buy a coyote engine and transmission still attached from an auto wrecking yard and just worry about installing it. Installing an engine at my local mechanic shop is just labor work, all they have to do is install the harness and swap the engines. My mechanic said he’ll have my 91’ LX ready in 2.5 weeks. Piece of cake.
I'm curious how much you can prep a new edge for the swap and still drive it with the old motor. For ex: can I add the return fuel line without problems, or should I wait for when I do the motor swap? Because I'm goin to have to build towards it. Also, wondering how many hours it takes to put the motor in roughly. I recall you saying you can use the stock motor mounts on the new edge swap, correct?
You can go to the pre-99 fuel system to go return style but idk how the ECU would handle it. But you can go ahead and get the parts ahead of time. Tubular K with mod motor mounts, upgraded clutch or build the auto trans, upgrade the cooling, maybe a bbk H/X pipe and long tube setup ready for the BBK coyote swap headers, etc. Etc.
Approximately how much will a swap cost for 2019 ls 3 6.2l into a 1966 ford f100 with custom headers and rebuild torque and trans. New harness, driveshaft coun. and front runner and hot cam
I did it on a 2005 f150 when the 5.4 went out , igot a copart 2012 f150 for 2200, a tree fail in the bed, paid 4k to have transmission and engine installed
I think for $10,000 I could drop a nice Terminator set up in my 2000 GT...or a built SOHC Mod Motor! My Vortech Supercharged 45K mile mod motor is good for 12.5@111 as it sits, I also run Mustang Challenge car time on the Road Course!!
I dont why some people wont go to a salvage yard and get parts and everythang is there i mean thats what i did i put the same kinde of engine in my mustang its been working good and it only cost me five hundred bucks
I was thinking the same thing. Buy a gt with what ever coyote gen u need from iac or copart. Buy one that has no front end damage. Theres atleast a good chunk of parts there.
I would like to swap a ford engine in my 69 mustang fastback.. I am looking into reliable mustang engines with stick shift.. any recomendation/suggestions?
that is the best 4v na before the 2011 coyote. it's a strong runner. full bolt on ported short runner intake manifold and a swap to 96-98 cobra intake cams is a fairly cheap build and can get you to 350+ whp on 93 pump gas. don't gear the gear go at least 4.10 in the back I'd recommend 430-456 if staying na
And that's why. Ls is a better choice cost. Dollar for dollar you can make more hp and more after market support. 400 hp coyote or 1000+hp ls junkyard monster you do the math.
The cheapest successful build I seen total came up to $7,788 in a 1986 GT... for motor mounts k frame , throttle body , cats , fuel line , and a few computer codes bugs fixed and the rest was plug and play .. would have been cheaper if he didn’t get the bamba cam tune and flo master exhaust setup , and he changed the air filter , and resealed the head gaskets because the engine came out of a junkyard 2011 5.0 GT CS and it sat for a while
Its around 10k if you can do all the fab work, or 25k if you pay a shop to do all the work. And anywhere inbetween depending on the amount of work you can do or deals you can find on parts. And depending on what parts you can sell of old motor and trans when finished.
exactly thank you. it isn't much more expensive than building a powerful Windsor you can make a ton of power and have perfect driveability and better mpg with the coyote and certainly better reliability compared to a built out the ass stroker plus a 347 stroker usually will only go 100k if you're lucky and take care of it the coyote can go way beyond that.
How does this not have more likes for this many views? LOL. I didn't do a coyote swap, but i've done a ton of work on my '89 including a motor swap. I've put up a link to the spreadsheet for that here: docs.google.com/spreadsheets/d/1_V8WiL9B40gVKv3JmYOtwokHZr6QtZralGd_cT2gNuM/edit?usp=sharing
Drop in a 7.0 L and then you'd have something. IMO the 5.0 coyote makes the car sound wicked as it's doors are getting blown off, but that's about it. All bark and no bite.
Just put a whipple on ur pushrod 5.0 with a t56 transmission and make sure she can breath with a set of trick flow heads headers and h pipe. You will smoke stock coyote's. Its just like ur wife always cheaper to keep her.
what you just said would cost 1000s of dollars and wouldn't be all that much cheaper all things considered....it's not just about the horsepower...it's the fact it has over 400 hp stock and can average 20 mpg or better prob even more in a lighter fox body. you aren't going to get that good in a 400+ hp pushrod stroker or blown pushrod and the driveability also won't be nearly as good. plus that 400+ on the coyote is just the start you can get to 450+ whp without even touching the heads cams or short block and it has potential to make 600+ easily if you supercharge it down the road. it's just hands down the better engine and I love pushrods and all mustangs but facts are facts if you build your pushrod to make a reliable 450 whp (which is getting near block splitting territory btw) you're going to have about as much in it and if you build the short block to go beyond that number like the coyote can you're def gonna have more in it. and you're still going to have to upgrade the suspension rear end trans etc just like with a coyote swap. I see low mile engines and trans with the harnesses ready to be swapped for like 5-6 grand on ebay all the time. there's just a few more things to do beyond that it could easily be done for sub 10k if you're only talking about the engine and trans and getting it in the car and running.
How much depends on what you get. Brand new crate engine, used mustang GT engine, used F150 engine or core engine (F150 or Mustang GT). Fuel system and going crazy with 1200 dollar system dual pumps and never ever going to supercharge it. I'm in middle of helping my brother do coyote swap on 01 cobra. Have many say stock cluster won't work at all. Looking at diagrams and knowing Control pak does broadcast engine info over datalink and cluster works off datalink WOW 2 wires to wire in. If datalink protocol different between both of them then he will try this www.carid.com/2004-ford-mustang-custom-gauges/intellitronix-led-digital-replacement-gauge-panel-613116928.html. I have done glider kits where you drop in older diesel into brand new chassis Both have different datalink protocols and they make control box that goes between them to make them talk to each other. It don't always work the best sometimes they do something goofy. Yes I'm a tech
Hey buddy, if you want to save a ton of money i can save you a few grand on the fuel system for something you never thought of. Let me know if you are buying a fuel system upgrade or if you want to use the stock one?
Just a lil tech tip for ya, If you don't want to spring for the adapter fitting & AFPR. You can use a stock Vette C5 fuel filter which has a built in regulator. it'll save you a few bucks there like 30 buck brand new
Before I would invest $15,000 to $25,000 to upgrade an older car to an EGO MACHINE I'd take my .380 and blow my ignorant head off. A very foolish waste of effort unless you for sure plan to keep it for 10yrs or more. Most gearheads do not have the commitment or attention span to manage more than 2yrs. Do something else.
There’s two kinds of fords 🤔 1 you have the Ford . 2 And the Can’t afford.
😆
It's actually a simple question it's either 20,000 or 10,000 no need to sugar-coat it man tell the straightforward
over 25,000 is what it cost not worth it when u can built a engine cheaper and a lot faster . then u have me i have 2300 in a 68 pu all that is left is final paint and interior running a stroked 454 with tunnel ram steel crank heavy rods heavy duty 400 turbo and still have the fresh rebuilt 327 and the stock trans 400 turbo that came with the truck and the 2300 is counting the cost of the truck but i have a secret on getting low mile crate engines for cheap or free the 68 454 has only 6000 miles on it and stock the engine had 450 hp at 485 torque so far i got 2 for free with the heavy duty 400 turbo but i get a lot of engines free like right now i am trading a low mile 350 4 bolt for a worn out 2018 l.s.7 427 got the 350 for free and the l.s.7 is a way better engine then any coyote engine stock it has 860 hp . u will find that most shops will put in a used engine in there build hop it up a little make it look fresh this way they can make money on the build so far i have saved over 15,000 on my build and it is just as good if not better because i know for a fact that it is a good engine no break in problems after 6000 miles u know it is good . i get these engine from a place know body ever thinks of and i get only bb chevy , fords and mopars all performance crate engines so far they all been free to me
Thank you!
I dont mean to be off topic but does any of you know of a method to get back into an Instagram account??
I was stupid lost my login password. I would love any tricks you can give me
@Colten Ben instablaster :)
@Kasen Thiago Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff now.
Seems to take quite some time so I will get back to you later with my results.
Donate engine and the transmission and I'll put in a 69 Chevelle to piss off the Chevy guys
wouldn't piss us off because it would always be broke down or running over people
I meaannn, we chevy guys ls swapped a plane😎
Yep time to LS a 2010 Ford explorer Sport Trac then a 2010 Town Car
@@mikead24 that is 1 swap over millions chevy swaps on everything else !!!!!!!!!!!!
Isn't an LS swap cheaper and more powerful?
My level of skill is removing the tire, then putting it back on, and taking it to a shop.
Sounds like a new Mustang financed is the best option thanks!
Hi you might have seen my car.
It was something my son wanted me to do a coyote swap to.
I’m trying to find a place in my life where it doesn’t hurt.
I lost my youngest son and my world exploded.
Watching your videos helps me meditate.
I might end up doing this.
I built every inch of the Capri myself,
The hard way ,
Alone in my garage,
Took 9 years,
I’m thinking about doing a swap in memory of my son.
I just wanted to say thank you for your videos.
I hope you're doing better! My thoughts an prayers!!!
I decided to just EFI a old motor. Edelbrock Pro Flow EFI on a 348 stroker will be plenty for me 😎. These new EFI systems work so well these days it’s hard for me to throw lots of money at a Coyote. It’s not hard to get the 420hp from a 348 and the EFI will definitely boost the mpg
Amen 🙏 brother
I'll just leave the push rod v8 in there
I was contemplating doing a coyote swap but the numbers don't add up. I have a 347 s trim vortex, blown head gasket.
Drop a 347 with a vortec alot cheaper easier and faster.
Only coyote I'd put in my 67 fastback is a flat crank gt350 motor.
@@I_like_turtles_67 that’s a voodoo not a coyote
@@Ruby5.0 Still rather have a sbf in my car. There's only two front suspension choices I go with to run a coyote swap. MMI & DSE. Both would cost a lot of money. To end up with less HP than my sbf makes.
Just got 93 GT, for sure a long project! My dream is buying a wrecked 18-22 gt350 or gt500 and stuff all the goodies I can into the fox. Glad I was able to get the first step done this year.
Great topic and detail. Pretty much nailed everything on the head. It definitely is a loaded question, because it's really not that simple. A full swap of 12k may not be the same as another; could be a lot higher, depending on alterations and options you want. For me even after a year of research, I was still way off (short) on how much it cost me to swap my 94 Cobra.
Should be a simple answer
10 to 20k
The rest of the speech is just B/S time consuming!!!
Thats what i say. He talks to much. His videos suck, they're all the same. Nothing to learn from it
Why not compete against him....y'all are so damn smart, get after it...make a video answering the question...
Thanks for the video. Man look forward to seeing this car when it’s done. I did a terminator swap. Dude love it. Swaps on the either motor is just cool! And it’s the way to go for the daily guy or track guy with these. It all goes to what do u want in your car. Keep the videos coming. Going to be setting me up a channel soon for mine.
I agree with several comments concerning the random comments. It’s pretty good inform but rambles and somewhat gets off task at times. Takes too long at times to get the information across. And in the end did he really answer the question or dance around it. It’s easy to go to the high end but most people want to know how can you do it or if you can and be somewhat cost effective.
Honestly a lot cheaper than I thought it would be...
I’m currently looking into purchasing a 67’ fastback and putting a cayote engine swap in it (or a newer engine) and then doing up the suspension, breaks etc.
Thought a full swap would cost insanely more
Going to be more in pre-fox. The engines way wider than engine bay and more mods needed bc not a popular swap
@@whippled18gt swapping it into something with a factory big block isn't terrible, but factory small block only cars might give issues.
The real question is gonna be, is it worth it? But you can’t answer that yet lolz. This hobby/sport/game, requires pay to play. If it’s too expensive for someone, then this isn’t for them. Build something old school and go fast like that. Don’t get me wrong, I’d like to coyote swap my 06 but I’m building a house right now. Priorities comes first. It’s highly appreciated that you tackled the big question everyone has. It is a hard question to answer, especially because there is no one answer to it. Sub’d and can’t wait til she’s done
David Martin Well said David. Hotrodding is expensive, either way. I looked at doing a Boss Block 363, and it was more expensive! Lol
Foxcast Media no way around paying
its not for everyone....but its the journey when doing it yourself or with friends...
michael #?# It’s a journey for sure, but when I drop the hammer for the first time, I know it will be worth it
I would love to see a coyote swap on a Ranger
I stopped 4 mins in.You started with,'there are 2 questions'1 what do you have,and 2. what do you want"?/I want to know how much a Coyote,with ECU.That is WHAT the question was.You are very smart,and I can relate, as you extrapolate the entire system I can see your eyes moving as your brain skips about through systems.
You then went off in 3 directions for each system.Please,How much is a Coyote,with an ECU?.
if your true to hot rodding the cost while a major factor is nothing compared to the smile on your face when it's done and you do with it what you built it for, be whatever that may, plus opening the hood and watching someone's jaw drop is alway's fun lol
HotRod9967 yeah
Friend of mine did it and it cost 12k that’s with already having the tremec and QuickTime, just as a reference
You just have to look for good deals on parts, do all the work yourself, even trade/barter for stuff. It can be done cheap if you know what your doing. I’m doing one now and I’m doing it as cheap as I can. Got my hydroboost stuff all from junkyard cheap.
One day ill have a coyote swap. I believe a few more years. The prices will get cheaper to do these swaps
lets hope god hears your prayers.
justin91lx Ellamore already has the kit to complete that transition. So you’re right in a couple years it will be cheaper and the motors will be cheaper . If I ever change my motor which most likely I won’t because my car is clean as hell . I would buy a boss 302 with the heads on the factory boss 302 . That 7000 for that motor . And you could probably get an aluminator cheaper in a coupe years , but remember when they stop making certain things the prices go way high . Especially when it’s discontinued Ford racing parts
justin91lx my buddy has done it for 6k.
Doubt itl get cheaper for at least 10 yrs.id bet money itl get more expensive
@@pacific7775
Hopefully more expensive,so less people can have them on the road...
I'm doing a coyote swap in my 2010 gt mustang. I have a 13 motor an trans, but I don't won't the 6r80
I’ve spent around 15k on mine. That’s starting without a car
Coyotecoupe 92 Yup, that seems to be the magic number
It cost me 12 to do mine and I coyote swapped an 87 Ranger and I'm looking to put a coyote in a Ford Fairlane when I buy it to be in the next month or two
@@addisondoty4231 That Ranger is gonna be fun lol.
I had an 03 ranger with the 4.0 and 5spd. Even that was fun in the rain.
It really depends on how much knowhow you have yourself. I personally would not spend that much swapping a coyote engine. I would just build a 434 Windsor with a passenger block.
Great info. Thank you for the knowledge and advice.
How much would a notch with a good coyote swap be worth?
First launch you'll probably break a T5 with a bone stock Coyote, not worth it when you have pieces flying everywhere. You're doing it right by getting a stronger transmission but kudos to you for staying stick
Greg V T5 are a very finicky animal. I have munched them on stock tires and stock motor. I have friends damn near pick the tires off the ground with one.
It cost a lot. U can buy a 2011 or 2012 GT for less probably. I just bought a 2012 GT for 15k and it has 69k Miles. A motor control pack the power steering bracket and ecu. Trans stuff. Yes. It cost a lot. But if u have the car and the money. I say go ahead and do it. Love to do my 98 gt but I seen this 2012 GT and went with that and I didn't have to wait.
it costs 21,317.85 dollars....period
With labor
Fantastic info thank you.
Where the hell are you finding coyote engines for 2 grand ? Everything I’ve found starts at 6 grand an up .
Lkq
eBay
This sounds all too familiar.
When I was a kid, I had a couple of old Mustangs. I had one in particular that was a 68 that I was going OCD on in restoring with an eye for higher performance.
Money just went and went and there was still more to buy. Here's the crux:
Back then, there was no high end muscle car market. An old pos Mustang coupe could be found for well less than a thousand. A fastback for about 40%+ or more. You could easily dump a couple grand into it and you would not be likely to sell it for anywhere near what you had in it.
By the time the late 90s rolled around, the market started to change. You know what these things are worth now, especially the Machs and GTs....
Well from my experience 95% of people that ask how much !!! do not have the $$$$ to even attempt to start on this project or that goes for any project. Sad to say but true oh and keep up the good work bud
Brian Sampman there’s the Ford and the can’t afford
Captain howdy how many times are you gonna say that?
I feel like if you have a new edge with a 3650 already in it you could get this done for much cheaper. Even a reman 3650 is only about 800 bucks in my area
So its cheaper to keep my 3v and buy a 2014 gt and have 2 of them
Power by the Hour is making a swap kit for the 3v. You keep almost everything. I haven't seen a price on how much the kit will be, though.
I just need the motor..control pack..bought all other stuff already and got t56 with 800hp clutch...how much am I looking at then
I'm sure a used engine / transmission combo is best....would driveshaft length and shifter location be close with a T56
Audience I'll just put a 4.6L terminator motor in my Fox, if I decided to do a swap. Now LS motors are cool, but I don't want to waste a ton of $$$. I'm retiring in 3 years, and love my procharged stroker Fox with ALL the bells and whistle. I also own a 2004 mystic chrome teriminator, both are immaculate...Yikes lol
10 to 20 for a foxbody well how about a 72 f100 with a crown vic crossmember and a four link 9 inch with 3.55s in the rear
I been thinking of doin some work to my Harley Davidson ford f150 how hard is it to swap with a coyote
In a harley f150, it would use the same motor mounts, transmission mount bery little fab work and just hook all the wires and e-fans and fuel system and you're golden
@@jetjoey19 thanx
How do I get my mt82 trans to work with my 02
What do you want?
Me:
Yes
Can i.swap a 4.2 to a 3.6 same make and model ? Do I need to change the transmission?
So I was thinking of just buying a 15+ donor car off copart. That was at least you have a motor and trans and can go from there. I want power steering and a/c. But even then spending all that money could just be a big down payment on a brand new gt. I'm just not sure
good honest answer also need to know if they want the 11-14yr or 15-18 little bit of price diff. would like to know what you think of these used master kits on ebay ? I have 98 gt and wanting to do a swap I have a AJE k member orderd I hear 4.6 engine mounts will work or should I start with a crate motor and control pack some of them master kits seem to have everything
I just bought a 56 f100 want to put a fuel injected motor in it not a racer just a cruiser but would like to put a 5.0 in it of course transmission to go with it and a real to go with it what would recommend
Would be good, if when you release the PDF file you have a reference section for what video(s) have that particular part in them. You put out so much content, that figure people going back, are going to have a hard time going through months and months of 15 min videos 5 days a week... I've been keeping notes of a few refetence.viseos for certain parts myself
I guess 10,000 to 15,000. A moderate price not on the but not all out.
Every1 is so negative about how much. When I dropped off my car I asked how much to make sure I had plenty to pay for it. I researched it and knew about how much. I prefer to ask how much so when they call I have the $ Living in South Florida I can't pull an engine and put a new 1 in. The HOA hates it. They hate me cause my W2 is way less than what I make. So I keep it easy.
You gave valuable info but you made it sound a little too difficult. Just buy a coyote engine and transmission still attached from an auto wrecking yard and just worry about installing it. Installing an engine at my local mechanic shop is just labor work, all they have to do is install the harness and swap the engines. My mechanic said he’ll have my 91’ LX ready in 2.5 weeks. Piece of cake.
Was it a piece of cake?
I'm curious how much you can prep a new edge for the swap and still drive it with the old motor. For ex: can I add the return fuel line without problems, or should I wait for when I do the motor swap? Because I'm goin to have to build towards it.
Also, wondering how many hours it takes to put the motor in roughly. I recall you saying you can use the stock motor mounts on the new edge swap, correct?
You can go to the pre-99 fuel system to go return style but idk how the ECU would handle it. But you can go ahead and get the parts ahead of time. Tubular K with mod motor mounts, upgraded clutch or build the auto trans, upgrade the cooling, maybe a bbk H/X pipe and long tube setup ready for the BBK coyote swap headers, etc. Etc.
Coyote motors in eBay run from $7000 to 12000 or more then the extras dam looks like 20,000 dammm
Updated prices?
Approximately how much will a swap cost for 2019 ls 3 6.2l into a 1966 ford f100 with custom headers and rebuild torque and trans. New harness, driveshaft coun. and front runner and hot cam
I did it on a 2005 f150 when the 5.4 went out , igot a copart 2012 f150 for 2200, a tree fail in the bed, paid 4k to have transmission and engine installed
I have an 07 King Ranch and I have been considering the same swap. Did you get significant power increase and would you recommend it?
Buy a cheap v8 new edge and the 3650 bolts right up and u can use the factory k member
im at 25k and the engine is not even in the car yet.... I wish I would have stayed with my 347. Problem is you cant find anyone to do the work.
I think for $10,000 I could drop a nice Terminator set up in my 2000 GT...or a built SOHC Mod Motor! My Vortech Supercharged 45K mile mod motor is good for 12.5@111 as it sits, I also run Mustang Challenge car time on the Road Course!!
I dont why some people wont go to a salvage yard and get parts and everythang is there i mean thats what i did i put the same kinde of engine in my mustang its been working good and it only cost me five hundred bucks
Have 2005 f150 would like a swap gen 3 super charge 10 speed and atlas t case just thinking
it might be better to buy a salvage mustang
I was thinking the same thing. Buy a gt with what ever coyote gen u need from iac or copart. Buy one that has no front end damage. Theres atleast a good chunk of parts there.
Awesome, appreciate it now i know.
Hey I'm thinking about doing a coyote swap in my 1965 galaxie 500 xl what think
I like the Coyote swap a Gen II into a 94-95 bodied GT,is this possible for your team
What about the the diff? Can you use the stock diff or does it need to be swap out?
And I’m guess if your going automatic it’s probably a little more expensive
$15-$20K, you can buy an 11-14 Mustang Gt, Coyote pre installed, unless you would rather spend the $$ putting it in an older Mustang.
Jeff .S Would much rather have it in a lighter fox, just my preference
Jeff .S that is true but people choose the older mustangs particularly the new edges to swap because they are way lighter💯
dude its all about the fox rest is junk
Have you even driven a new mustang? I have owned several. from 88 to my current 17. The 17 is the best mustang I have ever owned.
Why are "restomods" so popular? Why do people build hot rods? They like the looks. Nothing better than having classic looks with modern tech.
Is it easy to buy a wrecked 2016 mustang gt and then swap it using all the donor parts except for kmemebers
Yes bro!!!!
It's been done for 6k
You can barely get a motor for 6k
Buddy Wilson you're not very informed. My motor was 2k shipped across the country to me. People find them cheaper than that
@@shotemup123 with how many miles on it? Was it complete with wiring harness? from a mustang or truck?
Buddy Wilson 80k miles, harness and everything. F150 motor, mustang cams are like $120
@@shotemup123 do you care the compression will be lower because of different pistons or are you boosting?
Have a 94 gt that I’m currently trying to do the swap to. I have the coyote and a 96 gt donor. What next steps should I take in the build?
What about 74 torino? What about the fuel tank
I would like to swap a ford engine in my 69 mustang fastback.. I am looking into reliable mustang engines with stick shift.. any recomendation/suggestions?
opinions on the 4.6 4v that's in my 04 mach 1? good reliable engines? haven't had it very long
that is the best 4v na before the 2011 coyote. it's a strong runner. full bolt on ported short runner intake manifold and a swap to 96-98 cobra intake cams is a fairly cheap build and can get you to 350+ whp on 93 pump gas. don't gear the gear go at least 4.10 in the back I'd recommend 430-456 if staying na
I’m in the middle of my swap and I have a donor car it’s a 2014 will the gauges fit my 2006 s197
And that's why. Ls is a better choice cost. Dollar for dollar you can make more hp and more after market support. 400 hp coyote or 1000+hp ls junkyard monster you do the math.
The cheapest successful build I seen total came up to $7,788 in a 1986 GT... for motor mounts k frame , throttle body , cats , fuel line , and a few computer codes bugs fixed and the rest was plug and play .. would have been cheaper if he didn’t get the bamba cam tune and flo master exhaust setup , and he changed the air filter , and resealed the head gaskets because the engine came out of a junkyard 2011 5.0 GT CS and it sat for a while
To do the job right why can you just say between
$10,000 to $ 25,000
Jason Smith how can you differ 15,000 😂😂
Jason Smith that’s a bigger differ than the price could even cost 😂😂
Its around 10k if you can do all the fab work, or 25k if you pay a shop to do all the work. And anywhere inbetween depending on the amount of work you can do or deals you can find on parts. And depending on what parts you can sell of old motor and trans when finished.
Doing the swap now i have a TKO 600 allu ds on pushrod setup does ds need shortened
Ok guys need some advice.Want to do a swap on my 08 mustang.Its a v6 and 5 speed trans.Whats the best way to get there .
I'd just buy a 5.0 from a wrecked mustang with low miles which could run from $2k-7k a transmission shouldn't be much
Will this engine fit a 1987 flareside Ford F 150?
I appreciate the video, but it can be slimmed down to ball park figure .
couldn't you say x to z,which at 11 min in he did
not to bad bro a built 347 longblock is about 7k alone
exactly thank you. it isn't much more expensive than building a powerful Windsor you can make a ton of power and have perfect driveability and better mpg with the coyote and certainly better reliability compared to a built out the ass stroker plus a 347 stroker usually will only go 100k if you're lucky and take care of it the coyote can go way beyond that.
I would like to do this to a 06 ford ranger! Do you think it’s possible?
I saw one swapped into a 2011 ranger back in 2011 when the coyote first came out...prob find the video on CZcams if you look
2k in the engine? The engines, if they are worth a shit are 4-7k and that's just the engine
What you need is a crashed coyote . Don’t buy a coyote crate motor , unless you have the money
How does this not have more likes for this many views? LOL. I didn't do a coyote swap, but i've done a ton of work on my '89 including a motor swap. I've put up a link to the spreadsheet for that here: docs.google.com/spreadsheets/d/1_V8WiL9B40gVKv3JmYOtwokHZr6QtZralGd_cT2gNuM/edit?usp=sharing
Y’all act like the coyote motor is 1000hp motor it’s nothing special lol u can build another motor way cheaper and more power
Coyotes make nasty amounts of power so it kind of is special.
Lay it on us man..
4.6 and 5.4 4v engines are dirt cheap and make huge power . The best for the bang for the buck if you ask me
lucian kristov where would you recommend I buy one, I can’t find any and would like to swap my 3v
just throw a Chevy motor in there
My 1966 Ford Mustang has a inline 6 nothing special
What happened to building an old 302, carbed, good Lord way to expensive for my blood, wow!!!!!
Brandon Alderson because there slow and weak
Save a lot of money and time at the shop and LS swap it.
Drop in a 7.0 L and then you'd have something. IMO the 5.0 coyote makes the car sound wicked as it's doors are getting blown off, but that's about it. All bark and no bite.
Just put a whipple on ur pushrod 5.0 with a t56 transmission and make sure she can breath with a set of trick flow heads headers and h pipe. You will smoke stock coyote's. Its just like ur wife always cheaper to keep her.
what you just said would cost 1000s of dollars and wouldn't be all that much cheaper all things considered....it's not just about the horsepower...it's the fact it has over 400 hp stock and can average 20 mpg or better prob even more in a lighter fox body. you aren't going to get that good in a 400+ hp pushrod stroker or blown pushrod and the driveability also won't be nearly as good. plus that 400+ on the coyote is just the start you can get to 450+ whp without even touching the heads cams or short block and it has potential to make 600+ easily if you supercharge it down the road. it's just hands down the better engine and I love pushrods and all mustangs but facts are facts if you build your pushrod to make a reliable 450 whp (which is getting near block splitting territory btw) you're going to have about as much in it and if you build the short block to go beyond that number like the coyote can you're def gonna have more in it. and you're still going to have to upgrade the suspension rear end trans etc just like with a coyote swap. I see low mile engines and trans with the harnesses ready to be swapped for like 5-6 grand on ebay all the time. there's just a few more things to do beyond that it could easily be done for sub 10k if you're only talking about the engine and trans and getting it in the car and running.
How much depends on what you get. Brand new crate engine, used mustang GT engine, used F150 engine or core engine (F150 or Mustang GT). Fuel system and going crazy with 1200 dollar system dual pumps and never ever going to supercharge it. I'm in middle of helping my brother do coyote swap on 01 cobra. Have many say stock cluster won't work at all. Looking at diagrams and knowing Control pak does broadcast engine info over datalink and cluster works off datalink WOW 2 wires to wire in. If datalink protocol different between both of them then he will try this www.carid.com/2004-ford-mustang-custom-gauges/intellitronix-led-digital-replacement-gauge-panel-613116928.html. I have done glider kits where you drop in older diesel into brand new chassis Both have different datalink protocols and they make control box that goes between them to make them talk to each other. It don't always work the best sometimes they do something goofy. Yes I'm a tech
Hey buddy, if you want to save a ton of money i can save you a few grand on the fuel system for something you never thought of. Let me know if you are buying a fuel system upgrade or if you want to use the stock one?
ckygogo All I am planning is a 255 in tank pump, AFPR, and adapter fittings
Just a lil tech tip for ya, If you don't want to spring for the adapter fitting & AFPR. You can use a stock Vette C5 fuel filter which has a built in regulator. it'll save you a few bucks there like 30 buck brand new
Is that what the strokercoupe guy used? I tried looking that up but didn’t find any additional info on it
Steven Hinkle yes it is, I did the same thing & it works great
ckygogo got any more info on it?
For all that's being done it's really NOT to $$ when you think about it.
Not worth it. Just buy a car with a Coyote already in it.
Before I would invest $15,000 to $25,000 to upgrade an older car to an EGO MACHINE I'd take my .380 and blow my ignorant head off. A very foolish waste of effort unless you for sure plan to keep it for 10yrs or more. Most gearheads do not have the commitment or attention span to manage more than 2yrs.
Do something else.