Old Bosch Hobby Drill - Restoration | Workshop DC
Vložit
- čas přidán 10. 07. 2021
- #Restoration #WorkshopDC #Drill #ASMR
Old Bosch Hobby Drill - Restoration? | Workshop DC
Hello Guys, how are you doing?
In this video i show you how to renovate a old bosch Hobby Drill.
This Drill belongs to my father and it have more than 30 years old, it's a very good tool from a very good brand.
Bosch is a brand that produces a lot of electric and non electric tools, as i already said is a company that sells tools with a very good quality for almost every type of work.
So, to begin the renovation i stated by removing the mandrel, after that i use my screwdriver to remove the screws and open the case.
I also remove the stickers, to clean them.
After the disassemble done, i begin cleaning all the case and other pieces with degreaser, some parts was really dirty with a old grease.
To clean electrical motors i always use penetrating oil and a soft plastic brush to do not damage the surface and in the electrical components.
The plug wires and triggers was cleaned with the same process.
I sanded the rotor to make a better connection with the brushes.
Now i Brush Wheel the mandrel to remove the superficial rust and make it more shine.
I Removed some bad casting marks on the plastic and scrapered some parts to make the damaged areas more smooth. I didn't wanted to make a super glossy finish on the surface of the case, i just remove some imperfections without remove the past marks.
I painted the case with a matte Black, 2 coats.
I also straightening the plaque with brand specifications.
The sticker needed a good clean, so i clean them with machine oil, i also laminate the sticker as you can see one of them broke when i remove.
All done, time to assemble.
The assemble was not that hard but i needed some atencion to plug the electrical conections, and i replaced the old brushes to new ones.
After done i glued the stickers and make a little test to see how it is working.
For me the drill is making less sound than it was before the renovation.
The final result was good and me and my dad was happy with it.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Rust Remover;
- Primer;
- Penetrating Oil;
Equipmentis used:
- BenchGrinder;
- Plier;
- Screwdriver;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, please make a Pix with this key - workshopdcdiy@gmail.com
My Instagram - / workshopdcof
My Facebook - / workshopdcof
If you like the video please don forget to Subscribe, like and comment!
Thanks for Watching!
With Love - DC ❤️
Beautiful restoration good job well done
Thanks Vince! ❤️
nice work 👍
Thanks MrSuzi! ❤️
Nicely done.
Thanks! ❤️
Nice job, man! I know it's tempting, but don't you start wandering throughout the house drilling holes all over the place haha
Now you know why I restored this drill hehe'
Thanks Bro! ❤️
Great! I fixed one like that
Thanks Bricoda! ❤️
Good job
Thanks TI! ❤️
Estupenda renovacion realizada a este Taladro Old Bosch Hobby, respetos desde Venezuela.💯🤜🔥🤛🙏👍💯💯
Muchas gracias Amilcar! ❤️
@@WorkshopDC 💯👍
Parabéns, excelente trabalho.
Obrigado Alexandre! ❤️
Good job ! And your video is very helpful.
Good job...
A very good restoration!! this was a very difficult one to restore as well, with a difficult to refinish exterior. love all the videos!
Thank you so much BGB! ❤️
Essa Furadeira ficou igualzinha a um berbequim que tenho cá por casa. Bom trabalho
Furadeira ou berbequim eis a questão? De qualquer maneira servem para furar kkkk
Obrigado Luiz! ❤️
Horeee aku sudah sub👍👍👍
Terima kasih banyak! ❤️
Great work as always I would probably have used double sided tape on the labels though, to get them super flat 🧡
Thanks Deena! ❤️
Double sided tape will be a good choise.
I have a few of the similar Bosch and Black and Decker drills as well, they are very well made. Even rewound the stator on one that I got for free from a customer by Bosch who did not want to pay nearly the price of a new drill for the stator, so I asked him for it, and got it for free. I was there to buy replacement metal gears for a Bosch electric screwdriver I had, where the original plastic gears had worn out, but there was a later version that had metal gears that would fit.
Bosch really make very good tool. I love that brand.
Bom trabalho. Infelizmente restaurar coisas de plástico é um trabalho ingrato.
Aliás, essa escova de aço do esmeril já viu dias melhores né kkkkkkkk
Realmente Plástico não muito o que fazer. Eu gosto de usar as escovas até acabar, mas logo eu coloco uma nova kkkk
Obrigado! ❤️
@@jzrgrmm kkkkk😂😂😂 Essa tá surrada viu. rsrs E o esmeril fica vibrando e pulando igual um pula-pula kkkkk🤣🤣😅
6:41 if you cleaning the old grease from the drill or grinder use a toilet paper first
Ai kêu mày lột tem ra chi vậy