How to Replace Rear Wheel Bearing 2009-2015 Toyota Prius
Vložit
- čas přidán 7. 08. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHR00307
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2009-2015 Toyota Prius.
This process should be similar on the following vehicles:
2010 Toyota Prius
2011 Toyota Prius
2012 Toyota Prius
2013 Toyota Prius
2014 Toyota Prius
2015 Toyota Prius
Tools you will need:
• 10mm Socket 1aau.to/oex/1AXAA00017
• 14mm Socket 1aau.to/off/1AXAA00015
• 21mm Socket 1aau.to/ob9/1AXAA00043
• 1/2 Inch Air Impact Gun 1aau.to/oQ/1AXAA00252
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/ofR/1AXAA00016
• Socket Extensions 1aau.to/off/1AXAA00015
• Torque Wrench 1aau.to/oc4/1AXAA00044
• Anti-Seize Grease
Subscribe: / @trq
Check out our playlist:
2010-2015 Toyota Prius: • 2010-2015 Toyota Prius
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Man! You saved me $400! THANK YOU SIR! 🙏
love your detailed repair video's
Very good video on wheel bearing replacement on a Prius! Mahalo!
Thanks for the tutorial. Saved me tons of money!
Awesome video man, thank you!
Super helpful - thank you!!
Thanks for the detailed video.
Is the right rear and left rear wheel bearing the same unit and is it the same for the hybrid as the plug in? I have the Gen 3 hybrid.
Thanks again.
Did same as you abs don't see rear speed sensors? Was careful w connectors,they clicked on. Got hubs off ebay cheap? Sensors no good? Any calibration needed?
nice job. What symptoms did you have to suggest the wheel bearing was bad? Squealing on turns? Some other symptom?
Great job
How do you know when the rear wheel bearing need replacement
great video. now i know how to do it and jsut need thousands of dollars in tools to complete it lol
What are the tightening torques of all bolts?
What kinda lub did you use ?
Do u have to do both at the same time? Left rear and right rear?
+Dees Links Thanks for watching. Bearings tend to wear out evenly, so it is best practices to replace both sides!
what was the paste that you used against rust?
Anti seize
This is not for a Prius 2013
don't let the weight of that caliper pull down on the hose. Should support it by strapping it to something...
Good video-would be better if your camera was on the aorta, rather than your hands…
Thanks Man! Great Video!