Watch This to Before Installing Your 12K Upgrade Kit
Vložit
- čas přidán 1. 08. 2024
- 🎉Upgrade your Sonic Mighty 8K to 12K: phrozen3d.net/NjRI3!
Experience the capability of 12K printing now: achieve effortless higher printing quality just by replacing a few key components. The Phrozen ACF Film paired with the new firmware from the new 12K mainboard will reduce your printing time and increase printing efficiency to achieve successful prints each time.
In this video, we will show you how to upgrade your Sonic Mighty 8 K printer parts into 12K and how to change your release film to the new ACF film.
Learn more about the 12K Upgrade Kit: phrozen3d.net/NjRI3
* Please DO NOT refresh your Sonic Mighty 8K’s firmware after installing your 12K Upgrade Kit. You can download the new 12K firmware on Phrozen Website.
**The LCD test in this tutorial video uses the Mighty 8K for demonstration purposes. After installing the Mighty 12K Upgrade Kit, the LCD test results may differ from the actual performance. As long as the test functions are successfully completed, it indicates a successful installation.
📌Click on the time stamp below to review each section:
00:00 Unboxing
00:08 What's in the upgrade kit?
00:28 Procedure preview
00:56 Remove the case
01:39 Change the LED driver
03:08 Remove the mainboard
04:39 Remove the LCD panel
05:03 Install the mainboard
06:23 Setting up the LCD panel
07:47 Perform the hardware test
09:29 Install the case back
10:00 Replacing the ACF film
11:44 Change the 8K label into the 12K
We hope you have an incredible 3D printing journey with your new 12K printer!
Follow us on Facebook ➜phrozen3d.net/CF9rN
Instagram ➜ phrozen3d.net/i77kS
TikTok➜phrozen3d.net/2zPmd
Twitter➜ phrozen3d.net/OrFF2
#LCD3DPrinting #Mighty8K #Mighty12K #UpgradeKit #ACFFilm - Věda a technologie
Thanks to the detailed explanation, it can be easily changed to 12k mighty!!
❤️❤️❤️
super merci phrozen !!!😍🤩💯👍👍👍👏👏 cool le tuto et pratique pour upgrader nos imprimante 3d!!!
I have installed the upgrade and 12k firmware. What about Chitubox? There is no Mighty 12K to select. Edit. I found the information I needed after a lot of searching. That information I needed should be in this video.
How do you slice for it to print on the new 12k resolution? I don't see a new settings in chitubox for the new resolution
Do I need to replace the USB splitter too? There is a new one in the package
@phrozen3d Is there any harm of leaving the ground cable as it was before the upgrade?
I think I need to do leveling again because of the difference in the thickness of the two films?
Is there any problem if I use it as is?
I wonder if you have a plan to release an upgraded finished product. I'm still delaying the purchase because I'm afraid that the 12K finished product will come out
I bought and installed the upgrade kit and installed the firmware update. The problem for me is that chitubox doesn't have the resin parameters to print faster. The 12K printer parameter have to be set manually in the software, but it's not in the instructions...
Any plans of similar to mini 8k?
Will there be an upgrade kit for the Mega?
Non c'è anche per phrozen Mega 8k?
Hey phrozen, i installed mine today but the screen has a bubble in the polarizing film and the acf seem scratched. What should i do ?
Hi there 👋 please fill this form : helpcenter.phrozen3d.com/hc/en-us/requests/new. One of our agents will assist you shortly🙏🏼
Hello, I switched to 12 k, what are the parameters to print?
We do not keep the 8 k parameters I suppose?
A video would be appreciated.
please help me
Hello! You can click here to learn about the parameter settings. Thank you.
phrozen3d.com/pages/resin-12k-upgrade-kit-for-mighty-8k
What about the ground cable? Do we need to plug it back? When? How?
We won't be installing the ground wire after removing it 😊
Will this upgrade work on the Sonic Mighty 4K as well or only the 8K version?
This 12K Upgrade Kit only works on the Sonic Mighty 8K😊
Will there be a firmware update required for the upgrade? Also do I have to upgrade to the ACF film, or can I keep using nFEP with the 12k?
Yes, there will be a firmware update for the 12K upgrade. Using nFEP with the 12K is fine, but we recommend you to try out our ACF film for a faster printing experience 😉
What version is the correct one?
Are there also new files for the 12k version with the 8k aqua resin?
ACF reduces print quality buy a small amount I’d stick with nfep.
Hello phrozen i have original box pack mighty 8k lcd can i exchange with this i can give u
Difference amount
Bought the mighty 8k brand new with the 12k upgrade kit, installed following this video, but the printer won’t turn on….
Anyone else experiencing this issue?
Hi there! Don't hesitate to reach out to us! We'd love to help you out with confirming the details of your issue. Our customer service team is available to assist you.
helpcenter.phrozen3d.com/hc/en-us/requests/new
I did this install today, but my LED is now staying on all the time. I don’t remember this being the case before. But I never powered it on with the case off before.
Hello.Please contact our customer service for assistance. A specialist will help you with this issue. Thank you.
helpcenter.phrozen3d.com/hc/en-us/requests/new
Is the firmware update done after replacing the hardware?
You can download the 12K firmware here: helpcenter.phrozen3d.com/hc/en-us/articles/6369983852569-Firmware-downloads
😊😍👍🤝