Few people know these clever ideas in metalworking
Vložit
- čas přidán 9. 07. 2024
- Few people know these clever ideas in metal working on the lathe and milling machine !!!
==================================
Good afternoon, friends!!!
My name is Sergey, I am the author of Cool Ideas DIY channel. On this channel I present everything that I made with my own hands at home. Creative ideas, useful tips, homemade tools and inventions. Welcome to my channel - Cool Ideas DIY!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative ideas
🔥Make in home
🔥Life hacks
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share! - Věda a technologie
Love from INDIA ❤
Thank you so much friend!
SENDING THANK YOU FROM FLORIDA IN THE USA......love all you do, Paul
Thank you and welcome!
🎉 insert end mills! Saving this one
Welcome!
Exelente video ¡ pregunta . A cuantas vueltas corto el hierro redondo y de q diametro ?
MASHA.ALLAH.GOOD.WORK
Thank you so much friend!
Absolut top!
Thank you and welcome!
Good work❤❤❤
Thank you so much friend!
👍👍👍
Seus vídeos são muito bons mesmo! Parabéns 👌👌👏👊❤️🤝🇧🇷
Thank you and welcome!
real cool
Thanks man!
Okay..... 🤔 wenn mir mal langweilig wird... Ist, kann ich mal was machen 😅
Nice
Perfeito!👍
Thank you and welcome!
How to hold square stock in a 3 jaw chuck, that's the biggest tip here.
👏🏻👏🏻👏🏻
parece a empresa que eu trabalho
du machst hinten vorne vieles
Welcome!
the cutting edge of the insert in tool #2 should be on the center line, right now it is waaayyy off
Welcome!
Tools 2 + 3 are waaay off, I'm surprised that they don't rub. Basic stuff to have the tool face on the centerline.
Do you know what the first tool is useful for?
थडतछं जोछ
Need to make yourself a few file handles, especially the ones you use on the lathe. Catch a jaw with one and the tang will be in your wrist and half way up your arm before you can even think shit let alone say it.
The first tool could have the clamping screw from the top going through the holder to clamp the toolbit, keeping the bottom flat for more clearance below the toolbit. The toolbit could then be even lower in the holder as there will be no need for so much material for the thread. The toolbit should be ground half way to keep the cutting face on the centreline of the spindle. This makes the cutting edge the largest radius so less relief behind it is required making it stronger. I dont see an application for this tool, maybe that is the next video.
👍👍👍
Thanks man!