salt water entered me from the usb c port door, I sprayed everything with wd 40 and left it to dry in rice, no signs of life, was I wrong? I am not able to disassemble it like in the video.
I have the same issue. Water got between the battery and the module. I think this created some kind of a short and destroyed one of the parts. No liquid inside the case either.
Yes, you could try. It's just that there would be too many exposed areas (fpc, connectors), the case somehow also has a cooling role for the processor. It would be a little risky but not impossible.
My One R's door for the charging port and SD card no longer holds. This is due to where one of the "slits" on the core frame, that the door goes into, has broken. Do you know if the housing of the "core", the side with the SD card and charging port, can be replaced/bought separately?
Hi, Please help me tht my insta 360 is showing, connection lost with the lense module, please restart, But no luck of re-start, many are facing this issue. I think because of the port get loss by time attaching or ditching
Unfortunately, I did not encounter this defect. This defect can occur for many reasons. The simplest would be to try to clean the connectors with isopropyl alcohol.
Depending on how long it was in seawater and depending on how you proceeded after you recovered it, it could be more or less repairable. The most important thing is to remove the battery immediately. After that, it should be rinsed with clean water to avoid corrosion of the connectors. If you follow the steps in the video and manage to disassemble it, you can try to clean the internal components with isopropyl alcohol. If it has been in salt water for a long time or you continued to use it afterward, there is a good chance that some components will be irreparably damaged.
salt water entered me from the usb c port door, I sprayed everything with wd 40 and left it to dry in rice, no signs of life, was I wrong? I am not able to disassemble it like in the video.
Wow, the Patience of a saint, I think my one R now has water damage, no red battery/power light.
Mine too
@@motosardoMine did come back to life after leaving it for a few weeks, but have since gone onto a X3 and just recently an X4
Great video!
Thank you!
I have One R, and water has entered through charging port. Can you repair it.
I have the same issue. Water got between the battery and the module. I think this created some kind of a short and destroyed one of the parts. No liquid inside the case either.
Man i think i can totally break this into an cam for my fpv by decasing this part
Yes, you could try. It's just that there would be too many exposed areas (fpc, connectors), the case somehow also has a cooling role for the processor. It would be a little risky but not impossible.
I need a help from uh bro
My One R's door for the charging port and SD card no longer holds. This is due to where one of the "slits" on the core frame, that the door goes into, has broken.
Do you know if the housing of the "core", the side with the SD card and charging port, can be replaced/bought separately?
Thanks for the video, my 4k module has the male connector damaged, do you know the ref for this part?
My insta360 twin edition core got water damage,can u service it
I'm sorry, I don't have enough spare parts for this type of camera and I don't want you to send it if I can't assure you that I can fix it.
I have SMO.4k
Led Blue solid
After update
Please helpme
hi, do you have a teardown video of the insta 360 flow please? I cannot find a video anywhere
on how to open the insta 360 flow
Unfortunately, I don't have this type of camera.
GREAT VIDEO. Where can I get a new touch screen for the one rs
I think you can only buy it from someone who disassembles such video cameras or you can buy a defective one and change the display yourself.
sadly i dont have any spares. if you are from europe i could send you mine if youd like to take a look (ill pay you ofc)
Can u help my insta360 repair cuz I on but is not on anymore 😢
What kind of glue did you use to seal it back? Will ti be waterproof again?
I didn't use a special glue to make it waterproof again. There are special solutions for this (epoxy, silicone, acrylic).
Yo. Could that camera module's ribbon cable fit a raspberry pi?
Unfortunately, I don't know if it fits.
Hi,
Please help me tht my insta 360 is showing, connection lost with the lense module, please restart,
But no luck of re-start, many are facing this issue. I think because of the port get loss by time attaching or ditching
Unfortunately, I did not encounter this defect. This defect can occur for many reasons. The simplest would be to try to clean the connectors with isopropyl alcohol.
I have same model and its showing same issue after dropped in sea water.
Depending on how long it was in seawater and depending on how you proceeded after you recovered it, it could be more or less repairable. The most important thing is to remove the battery immediately. After that, it should be rinsed with clean water to avoid corrosion of the connectors. If you follow the steps in the video and manage to disassemble it, you can try to clean the internal components with isopropyl alcohol. If it has been in salt water for a long time or you continued to use it afterward, there is a good chance that some components will be irreparably damaged.