The way he’s driving the bike looks like „Trail“. Driving through the landscape not for speed, but to master difficult „scenes“. What you need there is a wide power band starting just above idle. Nothing this twin-engine had originally. A friend of mine had one and it was all about rev‘s. And then add an in any case to big turbocharger. The one used looks more like 2..3l displacement instead of 125ccm. But anyway, in the 70s, when I was in the „modify your small bike“ age, we did not the parts and machinery at all. If we would have got hands on a modern TIG welder! We used either electrode welders (and mainly closed holes we burned in before), or we sometimes could get hold on a gas welder to make nice 2stroke exhaust cones. Maybe that way we survived 🙃😎.
I just noticed this, but I think it would run better if you ran it as a draw through setup (carb before the turbo) instead of a blow through like you have it.
Nope, because then you need to change the Turbo Seals out. Other why's it sucks oil and makes a huge vacuum leak. He neeeds a fuel pump or a way to make a 1:1 Fuel pressure rise with boost.
@@trxtech3010 on a carb setup, a blow through requires pressurizing the carb to manifold pressure. its easier to do a draw through setup. It wont make the leak like youre claiming it will. and thats from first hand experience with draw through carbie turbo setups on vws increasing fuel pressure would just cause the float bowls to leak. What you actually have to do is pressurize the float bowls, but this doesn't work on all carb setups. I've seen some setups where the entire carb is contained within a pressure box
Germans are Asians and other foreign countries not as much America any more but still alittle cause America is 9n Russia's side and one Israel prime minister is siding Putin against Ukraine which was Germans ally since thirties so they are foreign countries mostly us too but not as much any more they give others permission and us too ones that want to be their allies you and I would have permission too you know they will there's some few hand full that are not for Putin
А четырёх цилиндровый можешь собрать? Это будет интересно тем что такой тип двигателя распространенный Я впервые вижу двухцилиндровый самодельный Это просто шикарно конечно дружище. Да и кстати ещё есть звук подобие спортивного мотоцикла даже на этих двух цилиндров, a 4х будет он абсолютно звук идентичен просто
Nên làm 2 kênh ytb a à. Một bên là có giọng nói của a uo kênh dành cho người việt. còn kênh kia thì ko cần lòng tiếng dành cho người nước ngoài. Rất nhiều người làm như vậy a à 😊 chúc a thành công kênh ngày càng phát triển 👍
Le Dan your channel is great. One quick note though you need an oil pump to feed the turbo oil or does the turbo have its own built in pump that sucks the scavenged oil?
I believe that boss he welded and tapped was in a pressure passage to end feed the crank(see 11:19 & 13:27-13:42), and thus the turbo gets it also...@14:00 you can just make out a clear braided return line showing flow. Also as he puts on air cleaner, behind his hand 14:46-14:56 w/the white zip tie.
I wish there were captions on this mans videos! That engine build is fantastic!
Bro same
There are, press the CC icon on the bottom right of the screen!
@@alexroca6981 Which is worthless except for [Um], So[Music] & [Applause]...
Respect from Brasil,i never see 2 cylinder engine bmx...in Brasil only have a bmx with 1 cylinder,50cc,2 or 4 stroke...good job.
đây là một trong những kênh xe dc nước bạn quan tâm nhiều
All your creations needs atleast a million views great work man 2 thumbs up from Philippines 🇵🇭
Muchas gracias mi amigo❤️❤️
The way he’s driving the bike looks like „Trail“. Driving through the landscape not for speed, but to master difficult „scenes“. What you need there is a wide power band starting just above idle. Nothing this twin-engine had originally. A friend of mine had one and it was all about rev‘s. And then add an in any case to big turbocharger. The one used looks more like 2..3l displacement instead of 125ccm.
But anyway, in the 70s, when I was in the „modify your small bike“ age, we did not the parts and machinery at all. If we would have got hands on a modern TIG welder! We used either electrode welders (and mainly closed holes we burned in before), or we sometimes could get hold on a gas welder to make nice 2stroke exhaust cones.
Maybe that way we survived 🙃😎.
Hands down one of the best detailed video on youtube to do a custom build to a bike thank you!!!
Chế thêm chỗ đựng cục gạch vừa kê chân chống và cũng là công cụ hỗ trợ :)) , cảm ơn b vì đã mang lại nhiều video ý nghĩa
nghe máy nổ đã quá bạn ơi
I just noticed this, but I think it would run better if you ran it as a draw through setup (carb before the turbo) instead of a blow through like you have it.
Nope, because then you need to change the Turbo Seals out. Other why's it sucks oil and makes a huge vacuum leak. He neeeds a fuel pump or a way to make a 1:1 Fuel pressure rise with boost.
@@trxtech3010 on a carb setup, a blow through requires pressurizing the carb to manifold pressure. its easier to do a draw through setup. It wont make the leak like youre claiming it will. and thats from first hand experience with draw through carbie turbo setups on vws
increasing fuel pressure would just cause the float bowls to leak. What you actually have to do is pressurize the float bowls, but this doesn't work on all carb setups. I've seen some setups where the entire carb is contained within a pressure box
Thats pretty slick using the frame as the gas tank! For a minute I was like hold up where is the tank🤔
Very cool. I want to do 2 cylinders. I'm from Thailand. ❤️🇹🇭🇹🇭
Sawadeekap
Great masterpiece ❤ Love from philippines ❤💪👉🇵🇭
This kid's got insane talent!!!!!! Awesome Ideas and ultra cool builds! Indian Larry would have liked your work..
Wow! Who gave you permission to build such an awesome bike?? I love it!!
if you dont run it in street ragularly, you dont need permission
Probably his mind
Germans are Asians and other foreign countries not as much America any more but still alittle cause America is 9n Russia's side and one Israel prime minister is siding Putin against Ukraine which was Germans ally since thirties so they are foreign countries mostly us too but not as much any more they give others permission and us too ones that want to be their allies you and I would have permission too you know they will there's some few hand full that are not for Putin
@@Jeremytran_18 it’s a metaphor lol
@@ball7411 it was 8 months ago lol, the time goes so fast 😂😂
I wish I have the same skills and balls as this guy! Putting an engine to a BMX is dangerous enough.. and he put a friggin turbo in it! What a madlad!
Hai đầu lòng mà thêm quả turbo nữa ,good job
chế được như vậy là quá ok ..! tuy nhiên mình góp ý thêm cho bạn nên thêm gác chân kiểu moto và lắp thêm chắn bùng kèm hệ thống đèn nữa là ok ..!
Hi om from indonesia, i also own a 2 cylinder wave 110, good job 👍🏼
Terima kasih a, dan orang Indonesia
Giá sao vạy ạ
Halo sobat. Saya juga dari Indonesia. Saya sangat suka projek 2 silinder
Sound like benelli300😅
Awsssm👌
Great build! , bad brakes! 👍
Wow really awesome. Good job. RESPECT from the Netherlands 🇳🇱 💪💪
Very creative. Nice work!
Cái này gọi là đỉnh của chóp.trong làng chế và binh xe
Siêu phẩm được tạo rất đẹp việt nam giỏi quá
Such a great talented person.
Really nice build. Smart man.
Ga ăng ti nghe như harley, còn lúc nẹt nghe như 4 máy quá đỉnh quá bác ơi
chúc bạn sức khỏe, ra thêm clip hay
respect from Tunisia 🇹🇳👌🤗 nice
А четырёх цилиндровый можешь собрать? Это будет интересно тем что такой тип двигателя распространенный Я впервые вижу двухцилиндровый самодельный Это просто шикарно конечно дружище. Да и кстати ещё есть звук подобие спортивного мотоцикла даже на этих двух цилиндров, a 4х будет он абсолютно звук идентичен просто
A Dẫn chế đẳng cấp quá
Acompanho esse canal a algum tempo e sempre fico impressionado com suas construções, parabéns. Você é muito bom de serviço.
Parabéns! Você é ninja demais!
Nên gắn intercooler nhé chủ kênh.
Đó là j ạ
@@Le_Dan làm mát khí trước khi vào họng hút.
@@Le_Dan à. sẵn cho mình xin link bán turbo dc k nè
@@phuongxamgsx bạn vào kênh Khắc Duy Vlog
Phát hiện :)))
Nên làm 2 kênh ytb a à. Một bên là có giọng nói của a uo kênh dành cho người việt. còn kênh kia thì ko cần lòng tiếng dành cho người nước ngoài. Rất nhiều người làm như vậy a à 😊 chúc a thành công kênh ngày càng phát triển 👍
Nếu kênh kia cũng gặp phải ng nước ngoài thì cũng vậy thôi.
p
Love you video from Philippines 🇵🇭🇵🇭🇵🇭🇵🇭
💖💖
this is a cool bike!👍
Nice modification but i didnt saw the battery & fuel tank..👍😊
I think the fuel tank is in its own body.
Cool burn out man i love it for a bmw with dirt tread or all terrain treaded tires with deep treads
Nghe giống như xe 4 máy ,. Giống moto. Hay lắm anh ơi
Looks like you go all in with your handmade twin cylinder BMX bro 🥸
Oh i’m sorry i forgot about that turbo too 🔥🛸👽
Bang nawee, mau swap engine satria nya bang?
It would probably work better with the carburator on the turbo!
a thợ good chóp tuyệt vời đỉnh nhất việt nam
The bicycle that makes world proud of it and him..
With respect From PAKISTAN ! God job ! I had never seen 2 or 3 cylinder 4 and 2 stroke engine. I also want to convert my bike 2 cylinder in pakistan
❤️
I love that sound 🙏
Nice bike thanks for sharing .Santa Rosa california
That’s awsome I love the no fuel tank trick .
Beautiful Project ♥️
Great work! Much appreciate from Indonesia🇮🇩
WOW turbo charged cub.mx but no cooler so just go for a oversized airfilter ,, it's really cool greetings from Norway
nice rear spring setup you got there
Guy has so much talent
Great, great build, except you put the top fork bearing race on backwards.
Exactly what I was thinking! Had to check the comments to see if I wasn’t the only one who saw that! Lol
One of the most American non American things I’ve seen! Hell yeah brother!
Very amazing skills . Beautiful bike 🙏🏼✨
Quá đỉnh rồi anh ơi 👍
Nice build but the frame will bend sooner than later looks nice tho
Ja Man, great job!! Go ahead... Greetings from Germany, Munich...
Chúc anh luôn thành công 😊
Mừng anh trở lại... kênh kia bay màu mất tiêu 😢
When the sc project exhaust more expensive than the bike itself
Wrwqur
Quá giỏi! 👍👍👍
Nice sound, i like it, awesome
You set up a new channel ? No wonder ive got no up dates from you 🤣🤣 found you now 😁😁🤘🤘🤘🤘🤘
I want an engine like that for my dirtbike
Great build no stone untouched man I would love to give you my Harley see where that goes 👍🤘🍀
Quá ngon , chắc liên hệ bạn làm 1 e như này quá👍👍👍👍
bro can u make inline4 or 3 engien Love to see ur video's gr8 work🔥👌🇮🇳🇮🇳
RESPECT MAN FROM ATHENS GREECE...♠💥💥
hi.. I'm from Indonesia 🇲🇨👍👍, your idea is awesome..
hahaha nice build, love it
keep up 👍
That is so cool I wish I had it
Hi.. I'm from Indonesia
Amazing..
Good job brother... 👍
You are really talented, keep it up
trais na alto giro pra nois vê se é braba msm
só se for pra quebrar o motor no primeiro role
saporra n bota pra andar n sei pra q 2 cilindro turbo kkkkkk agonia
Brilliant idea..nice workmanship... most amazing diy bike
Thành công sẽ đến với ai biết cố gắng
Hay lắm vẫn oi kỷ sư tương lai việt nam
Super awesome my buddy! Lot of power on that frame!
Cool build. Is the frame the fuel tank?
mình thich ban ve phan gia cong co khi ...tay nghe dung dinh
Badass build - upper headset race was installed upside-down @5:39 though :x
You are a genius !
Le Dan your channel is great. One quick note though you need an oil pump to feed the turbo oil or does the turbo have its own built in pump that sucks the scavenged oil?
I believe that boss he welded and tapped was in a pressure passage to end feed the crank(see 11:19 & 13:27-13:42), and thus the turbo gets it also...@14:00 you can just make out a clear braided return line showing flow. Also as he puts on air cleaner, behind his hand 14:46-14:56 w/the white zip tie.
Chất thật sự 👍
Wow very nice 👍👍 from Philippines
Mien this is nice work
Làm máy L twin 2 đầu lòng 49cc đi anh ❤️
Quá đẳng cấp bạn ơi
Nice good job bro its amazing from philippines
Could u show us the turbo works in the high speed?
Would you mind sharing what kind of turbo charger are you using?
mong kênh phát triển a sẽ đc nổi tiếng
Cantik kali suaranya bah,salam dari Indonesia
Where sis I get the oil feed for the turbo? Was it an external electric oil pump?… and how did U tune the carburator
For few second.. I tot it was GS sound...
Quá giỏi A ơi..
Tiếng pô nghe phê vãi
Vì đây là 1 chiếc xe độ 2 máy nhưng âm thanh ấm hỉnh luôn đã vl