Mazdaspeed3 for Dummies: Modification Guide

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • In this video I describe what modifications you should do to you Mazdaspeed3 in a certain order for the fun having and safety of your engine! Thanks for watching yo!
    We are almost to 1,000 family members! Lets get it! If I missed anything major or explained something wrong just comment down below and I will pin the comment to help everybody as a team!
    skip to the info: 1:45
    skip to the cool drone shots: 10:14
    ---------------------------------------------------------------------------------------------------------------
    SEND ME SNAPS || camalford
    Follow me on Instagram: @cameronalford
    Twitter: @camalford
    My startup || www.mineralbrandco.com
    Better version of my camera you should buy: amzn.to/2e9bb5q
    Wide angle lens I use: amzn.to/2dV5uu3
    Cheaper wide lens: amzn.to/2ePjqDp
    GOPRO: amzn.to/2j7tBtB
    Fav Pole: amzn.to/2hQOEhW
    Fav mic: amzn.to/2dHZilY
    Put this on your mic, seriously: amzn.to/2dI5nio
    My photography camera: amzn.to/2e9fvl9
    Everyone needs this lens: amzn.to/2dI34vH
    Fav drone: amzn.to/2dHfb0F
    Fav SD Card: amzn.to/2eKf42k
    Fav MicroSD Card: amzn.to/2f6bMtC
    My computer: amzn.to/2e9ed9X
    My monitor: amzn.to/2ePjK5h
    I like this hard drive, its fast and tough: amzn.to/2dI9evv
    Weird Bendy Tripod: www.amazon.com...
    Long lens I use: amzn.to/2f6byma
    short lens I LOVE: amzn.to/2dV4OVG
    INTRO song: / zcrmadeit
    Music: Breathe Closer by Martin Veida on epidemicsound.com!

Komentáře • 471

  • @hunterkaimi
    @hunterkaimi Před 6 lety +4

    I’m buying a Mazda 3 this weekend and this video has inspired me to get into modifying and I can’t wait to see where it takes me. Thank you.

  • @xDarkerincx
    @xDarkerincx Před 2 lety +6

    so i have owned a 2007,2011 and a 2013 MS3 and by far do i love the gen 2 speed more. iv done a lot to it i can hardly keep up! very well layed out video! love the content!

  • @austinparker5155
    @austinparker5155 Před 2 lety

    I just bought my dream car! A 2012 Mazdaspeed3 in black ! I have wanted one since the 8th grade, took me until 31 years old to be able to justify one! All stock, 92k miles, i have been watching all your videos! thanks for the content! I especially like when you met that guy with the white rally Mazdaspeed and rebuilt it ! so cool!

    • @pablonatareno6638
      @pablonatareno6638 Před rokem

      Have fun man !! I just bought mine as well in black . So many ideas for the car 🔥

  • @evoshroomy
    @evoshroomy Před 7 lety +7

    Dude I just got my first mazda speed 3 with 14k miles used yesterday. No mods. Just sick stock virgin. Absolutely beautiful car. I will mod it after awhile just not at the moment

    • @sajeadawad4121
      @sajeadawad4121 Před 7 lety

      Jamie Simpson for how much and where im trynna find one

    • @evoshroomy
      @evoshroomy Před 7 lety +1

      Sajead Awad I just looked on autotrader.com and car gurus app across the United States. I got it for 18k

    • @sajeadawad4121
      @sajeadawad4121 Před 7 lety +1

      Oh nice congrats and thanks for responding so fast

    • @bbrlocal
      @bbrlocal Před 7 lety

      just got one myself 4 hours ago ms3

  • @failureisnooption_finofino87

    subbed. so happy that now there are so much more stuff out explaining what to do with these cars. when i had my first speed i blew it up and did not know any better.. now looking stuff up i see exactly what to do thanks to people like you.. keep up the great work dude. mazdaspeed6 owner here

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Im sorry to hear that.. Glad I can help!

    • @BabyCharlotteschannel
      @BabyCharlotteschannel Před rokem

      So funny how finding these little turbo hatchbacks recently amd hopefully buying one tomorrow or the next day if u find the right deal.. But gotta love the massive amount of info on the net for us gear heads!!

  • @gimmethecarkeys
    @gimmethecarkeys Před 7 lety +119

    1st power mod...
    COBB ACCESSPORT period...
    then internals
    then intake exhaust ect ect.
    you won't get the full benifit of any power mods until you get an accessport.

    • @CameronAlford
      @CameronAlford  Před 7 lety +5

      +gimmethecarkeys I agree

    • @supercooled
      @supercooled Před 7 lety +1

      Hey guys, I'm not a MS3 owner but I have a turbo car as well. I was like Cam describe wanting that woosh sound but it doesn't sound like its recommended to go that route.
      Recently shelled out some big money for coilovers and installed them. The shop also does tunes but strangers on the internet seem more helpful than the shop is who claim big horse power from no preventative mods. The guys just said yeah your motor can handle a 50% increase in power from just the tune and CAI. Like I'm completely unaware while they had cars in their shops with blown motors presumably from their tunes.
      Regarding the Cobb device, it isn't available for my car but doesn't an OBDII device with Torque (Android app) do the same thing? It has a lot of monitors in that app.

    • @FreakinKatGaming
      @FreakinKatGaming Před 7 lety

      Kyle W don’t forget your RODS!!! mine gave out round 400 something... so RODS!!! Very Manley💪🏻 H 😉

    • @marcotruitt19
      @marcotruitt19 Před 7 lety +8

      Internals first wtf😂😂

    • @fastandfun3524
      @fastandfun3524 Před 7 lety

      W

  • @taylorsharp2812
    @taylorsharp2812 Před 7 lety +1

    So glad you made this video man, just got a 2010 Speed3 a few months ago and really want to get to modifying right away but have no clue how or what to do! This video definitely helped out a ton, thanks for the help!

  • @aldenjohnregimbal
    @aldenjohnregimbal Před 7 lety +5

    I agree with almost everything! I wouldn't get a bpv if your on a budget unless your stocker is leaking, but they're usually good up to 21psi. And if I had to buy an intake again, I would just go straight to a 3-3.5" intake. Wish I'd have done that from the start. -_-
    Love the video quality man, keep it up! Representing us speed owners!

  • @pandadproductions8890
    @pandadproductions8890 Před 7 lety +2

    I just got my atp catless dp, and 3.5 inch intake. getting installed in roughly 13 hours. super stoked to hear it. currently tuned on 20psi on stock ko4 by Will himself at Purple Drank! Goodluck with the car brotha!

  • @vskalka
    @vskalka Před 7 lety +22

    Yo I got a 2007 Mazdaspeed 3 and I live here in SD!!! I am apart of California Mazdaspeeds we are a group with 623 people! If you wanna know more about the group hit me up on face book we are all super chill we buy/sell parts, throw kick backs, cruises, install nights and car events. Any thing need to know about a mazdas we know, We welcome anyone from stock to fully built crazy maniacs! Lets meet up and kick it sometime, great video also!

    • @GabeTelevision
      @GabeTelevision Před 7 lety

      Vinnie Skalka where can I find this group on FB?

    • @6shigh
      @6shigh Před 7 lety

      Same here where can i find this group?

    • @bigzoinks93
      @bigzoinks93 Před 6 lety

      Do y'all have a sect in NorCal?

    • @jaimevela22
      @jaimevela22 Před 6 lety

      Vinnie Skalka ???

    • @haze1281
      @haze1281 Před 5 lety

      Trying to be in the car seen my first mazda speed3

  • @CodyKloepfer
    @CodyKloepfer Před 7 lety +1

    Keep up the great work! I picked up a 2010 Mazdaspeed 3 a few months ago, upgrading from a 2005 Mazda 3. I really enjoy your content and keeping up with your Mazdaspeed 3. Thanks!

    • @CameronAlford
      @CameronAlford  Před 7 lety

      I bet that was a fun change for sure. Thanks for the support!!

  • @maribelsaygidia2414
    @maribelsaygidia2414 Před 6 lety +2

    I have a Mazda 3 as we speak, and looking to mod it. This video will essentially lay down the ground work.

  • @actionjackson82301
    @actionjackson82301 Před 4 lety +1

    I'm about to pull the trigger on a 13 MS3 and I am so excited. This video was so helpful!

  • @jacobmacculloch1531
    @jacobmacculloch1531 Před 6 lety

    Just bought a speed3.. watched pretty much all your videos and don’t have my car till tomorrow!! Love the vids!!

  • @arejayel98
    @arejayel98 Před 6 lety +6

    whats going on man, just came across your channel in search of mazdaspeed 3 content as im interested in purchasing one myself and found your videos to be extremely helpful.

    • @erickeeler3978
      @erickeeler3978 Před 4 lety

      Reuben Lomas hey man did u ever buy it ? I’ve been interested in a speed 3 for quite sometime but just don’t know if it’s worth

    • @duramaxdad
      @duramaxdad Před 4 lety

      Eric Keeler I just bought a Ms3 with mods. Love the car.

    • @alexking2296
      @alexking2296 Před 4 lety

      @@erickeeler3978 just bought 1 last week, once you cut the reso off and deal with the common turbo seal issues its blast

  • @krzysztofkunka2617
    @krzysztofkunka2617 Před 7 lety +10

    Great video. Btw my fmic install went great. Today i put on my enkei rpf1's 17×9 on with some meaty 255/40/17 Hankook tires.

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Thanks homie! Bet that looks nice!!

    • @businessmanph
      @businessmanph Před 7 lety

      how is the grip?
      my 255s still slip first and second gear

    • @krzysztofkunka2617
      @krzysztofkunka2617 Před 7 lety

      Fuong Wah the grip is great. It'll spin from time to time but not as bad as when it was on stock 225

  • @Atvstevie1
    @Atvstevie1 Před 7 lety

    You are my freaking hero! I have a 2012 2.5, and will be getting a sp3 sometime soon, as the 2.5 is not so friendly when it comes to modding , specifically slapping a turbo in it, new Ecu with wakey tunes, new injectors, high flow pumps.. Bla blah blah, not passing the Ontario clean drive test... Ugh...it goes on , so i really want a sp3 for a better "modding experience" , I will be watching all your videos! Keep it up! So pumped

  • @anthonyoddo7474
    @anthonyoddo7474 Před 7 lety +3

    I just recently got a 2010 Celestial Blue MS3 and didn't know what mods to starts with, so thank you for making this video! Also even at 1k subscribers your channel and video quality is so much higher than others out there, I think that's what makes you stand out and grow so quickly

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      So good to hear! Exactly the reason I made this video. Thanks a ton, means a lot. Good luck with your car!

  • @BabyCharlotteschannel

    Good video, BUT, first thing to do with a new to you car is FULLY SERVICING IT!! going over everything, under hood and under car, grease everything, change fluids etc etc!!
    Mod wise, better intake and exhaust are usually good, and definitely fine tuning at the very least, tightening blow off valve spring if able, and silicone hoses, better intercooler if driving hard, and of course either get it tuned or get an axcessport with whatever tune you need, etc..

  • @Bullshot62399
    @Bullshot62399 Před 7 lety

    I just got a 2013 mazdaspeed3 same color as yours and your video really helped me get an idea of how to start moding my speed3 thanks Cameron

  • @ELDOUBLES
    @ELDOUBLES Před 7 lety +17

    I love my speed , I also love your speed 🔥🔥🔥

  • @juantorres943
    @juantorres943 Před 7 lety

    Recently got t-boned by a police officer in my 2005 Mazda 3 sedan. Next car is a 2012 ms3 and I can't wait. Love your videos bro you just earned a subscriber !🙏🏻

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Not I'm sorry to hear. Thanks dude appreciate you watching!

  • @zacharycohen3130
    @zacharycohen3130 Před 7 lety

    Elaborating more on the vta or recirc topic. The reason to run recirculated is because the MAF meters the air entering the engine. The pressurized air thats still in the charge pipes was still metered. If you let it vent to the atmosphere, the engine reads a lean condition due to letting the air go rather than keeping it in the system. In turn, the ecu dumps in fuel making the car run rich between shifts to compensate for the missing air.

  • @vincentsmith6873
    @vincentsmith6873 Před 4 lety +1

    Thanks Cameron,just got full CorkSport lowering suspension and HPFP done.Now on to intake.

  • @paulrobinson3464
    @paulrobinson3464 Před 2 lety +5

    Love the vid. I just got my gen 2 ms3. I traded in my gen 1 for it. But I didn't know where to start and this vid definitely helped. Just a question though. On a scale of 1-10, how difficult was the installation process for the hpfp ? I already got my res delete. It was the first thing I did lol.

  • @spencerbrehm1982
    @spencerbrehm1982 Před 7 lety

    Just got a speed3 today for my first car. Couldn't love it enough

  • @brendabravo7575
    @brendabravo7575 Před 4 lety +1

    Thanks for this video ! I am considering buying a 2008 mazdaspeed 3 but we will see if I decide to.. I will for sure get the resonator delete if I do buy it right away, I am a full time student as well and this I would be a nice little daily with a little sound to it...thanks for the tips Cameron! :)

  • @jeremyheyne
    @jeremyheyne Před 4 lety

    Don’t know if you’re still around. Just purchased a 2013 speed3. Gotta say so far I love it and your videos are an excellent reference for mods and upgrades

    • @jamaljones8564
      @jamaljones8564 Před 4 lety

      Did you mod it yet?

    • @jeremyheyne
      @jeremyheyne Před 4 lety +1

      Not yet. Other things have happened since posting. But looking into some mods from corksport.

    • @jamaljones8564
      @jamaljones8564 Před 4 lety

      Jeremy Heyne would it be a downgrade if I traded my 05 Infiniti g35 coupe in for it?

    • @jeremyheyne
      @jeremyheyne Před 4 lety

      I don’t think so. I got my 2013 speed3 with 52k for 13.5k. Haven’t looked back. I love this car

  • @stevenbasswagner6882
    @stevenbasswagner6882 Před 7 lety

    the names steven lol i have a 2010 ms3 i got cpe top mount hpfp 3 inch all the way back turbo inlet pipe and intake with a dyno tune making 315 whp from freektune and getting a bigger turbo and front mount very soon and i love them because where im from no one has them they all have wrx and gti's that i roast lol love seeing there shocked face when they think its just a ms3 love the channel and i watch ever time you come out with a new video

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Hey Steven! Thats hilarious. Love it. Thanks for introducing yourself, sounds like a fun speed. I will catch up to you one day!

  • @ryanscooterful
    @ryanscooterful Před 7 lety

    Hey bro much love from Canada! Ive got a first gen ms3 2008.5 and im loving your videos so far! Can't wait to see where the channel goes in the future. pce homie

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Hey Ryan! Thats whats up, thanks for the support! Have a good rest of your weekend.

  • @SkyFarts
    @SkyFarts Před 7 lety

    I support the small man and the fellow ms3 community. keep it up homie, good shit!

  • @atefxf
    @atefxf Před 4 lety +2

    Damn u grown a LOOOOT.. like 100k+ ... ur gonna grow bigger!! Keep it up

  • @austinparker5155
    @austinparker5155 Před 2 lety

    you went from 1k subs to 278k in 6 years? thats amazing good job!

  • @koreymayo8884
    @koreymayo8884 Před 5 lety +2

    Keep the resonator on! Exhaust will already be loud with a catless downpipe! And don't mess with a bypass or BOV! Just get an aftermarket air intake!

  • @chrismoss3307
    @chrismoss3307 Před 4 lety

    The e85 tune is hella fun I am rocking that with a methane injection on my 08 and it puts me back in my seat every time

  • @Immortaliz3d
    @Immortaliz3d Před 7 lety +1

    The stock bypass valve isn't necessary to upgrade until it starts leaking or breaks. With buying the aftermarket one you just add a new part that needs maintenance. Only reason to change it would be for looks or the sound really.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Agreed! As often as I hear it, it was worth it to me for the sound!

  • @RobertoRodriguez-eb9sq
    @RobertoRodriguez-eb9sq Před 7 lety +1

    Its crazy how you know Tune by Nishan. He's from jersey and I've seen his car in person at car meets. Straight monster and I'm going to him to get my dyno tune.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Sweet! and yeah my buddy Jeff told me about him.

  • @EZ_EZzzz
    @EZ_EZzzz Před 6 lety +1

    Im going to subscribe, this helps a lot thanks. I am trying to decide between the Focus ST or a Mazdaspeed3, but its sure a lot of help Thanks!!!

  • @davidweight3017
    @davidweight3017 Před 7 lety +1

    Love your videos bro! I've had my gen1 speed3 for about 4 months now I got it completely stock and am slowly starting to do mods to it. So far just done lowering, wheels, and a Corksport SRI+TIP. This video definitely helped me get ideas on future mods for my speed3

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Hey David! Thanks for watching. Thats whats up. Bet it looks clean! Glad I could help.

  • @texas_henry
    @texas_henry Před 7 lety

    i have a 09 gt with full bolt ons and e85 also just ordered a ATP Turbo GT2871R with internal standard wastegate. im so excited

  • @namek1925
    @namek1925 Před 7 lety

    RMM yes. Passanger motor mount yes and no depends on what your goals are with the mount you get transmission whined sounds like another muffler in front of the car to me. trans mount will make it even louder. Just replace your old mount with a new one or if you don't mind having a loud sound from the front of the car then try a aftermarket mount. Lowering/good shocks/good tires helps alot with traction also. Warm the car up before you get on it! Take care of it and it will take care of you no need to WOT everywhere you go. Engines are not cheap.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Amen to that. PMM is freaking loud in my car compared to stock. Nice knowing the engine isn't moving though

    • @vitalquinxy778
      @vitalquinxy778 Před rokem

      Should I do a sigma upper transmission Mount or a driver side transmission Mount I’m not too sure which one

  • @adnankapic1627
    @adnankapic1627 Před 7 lety +4

    Hey great video man. Being a fairly new MS3 owner, I love your MS3 videos. I recently installed a K&N intake, corksport non-resonated exhaust and Turbosmart 50/50. What is your take on the turbosmart 50/50 since it is half VTA and half BPV?

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Thanks Adnan! Thats awesome. The 50/50 is definitely an acceptation! Not a problem at all. I actually kinda wanna get one lol

  • @aaronriehl6649
    @aaronriehl6649 Před 7 lety +2

    have you cleaned the carbon in your intake manifold and valves yet? you should look into doing that crappy job but it has to be done on these direct injection engines an egr delete and adding a catch can will help with build up. keep up the great vids man.

  • @ryan.jajaa7
    @ryan.jajaa7 Před rokem +1

    so i bought a gen 2 ms3 and it came with no cat and no muffler and a bov. What should i do?

  • @gabrieldiaz8689
    @gabrieldiaz8689 Před 7 lety

    I'm about to buy a 2012 so this video is going to be very helpful! Thanks for the info man great video! maybe I'll see you around San Diego

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Heck yeah if you ever see me for sure come say whats up! Good luck on getting one!

  • @micahlawton
    @micahlawton Před 6 lety +1

    Been on the fence about subscribing to ya, I hate to admit. But you got my sub my mans. MS3 🤙

  • @aldroms3life926
    @aldroms3life926 Před 5 lety

    Real helpful advice thanks so much,I will take care of her a lot more now

  • @craigzilla100
    @craigzilla100 Před 6 lety

    Upgraded from my eclipse and Bought a speed6 after I kids for a good "family car". God, I wish I had this car before kids when I had money. I'd love to mod it to your list. Maybe someday..

  • @josebarrientos9984
    @josebarrientos9984 Před 7 lety +5

    A gen one with a intake blow off valve and a cnt racing exhaust . Do u think I should get the fuel pump internals ?

  • @lalamadrid
    @lalamadrid Před 7 lety +2

    You're killing it Cameron!!!! 🙌🏼👏🏼

  • @joepena9004
    @joepena9004 Před 6 lety

    Cameron you make awesome videos. Keep up the good work .

  • @sohailahmed4347
    @sohailahmed4347 Před 7 lety

    Bro thank you so much for this!!! Life saver man. I have a 2013 speed3

  • @benjaminharrison3571
    @benjaminharrison3571 Před 7 lety

    Hi great video I have a UK Mazda 3 Mps just fitted cruise control as in the U.K. it didn't come standard on the Mk1 mps some great tips thanks for sharing!

  • @davidj3288
    @davidj3288 Před 5 lety

    I got a blow off valve and my car runs fine. There are no issues. You just need the right tune.

  • @xGSFxGoat
    @xGSFxGoat Před 7 lety

    I have a 2010 MS3 and I got the resonator delete and the JBR 88a RMM, and now I'm saving up for the Accessport (won't run tunes yet, I'm getting it for the launch control), then I'm going to get the HPFP internals, then intake and TIP, then downpipe. The terrible thing though is I live in Canada, so the HPFP internals are almost $600, the Accessport is almost $900, etc. I also just bought Evo X BBS wheels and tires today so I have another 20mm of tire and 1inch width of rim. As long as I don't lower it, 245s don't rub, which is nice.

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      +Goat good stuff, that's brutal that it costs that mug more. You have pictures of your build on insta?

    • @xGSFxGoat
      @xGSFxGoat Před 7 lety

      Cameron Alford Yeah man, follow me @celestial_blue_mica

  • @quocphu01
    @quocphu01 Před 6 lety

    yeah I have a gen 1 too, but ppl always forgot to mention the high fuel consumption associated with mod, my second Mazda turbo I just leave stock and pay less $25 fuel a week, the stock power is good enough for me

  • @rolandomartinez2674
    @rolandomartinez2674 Před 7 lety

    Sup good video got a crystal white pearl 08 speed just started to modify so far mods are, autotech hpfp, htp 3" turbo inlet , cobb short ram intake, ap v3,turbosmart dual port, resonator delete, and cat delete. Looking foward to get an exhaust ,and fmic. Thanks for the tutorials .

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Hey Rolando, thats awesome! Thanks for watching!

  • @hunterlies3246
    @hunterlies3246 Před 7 lety +1

    Hey great jobs on the vids man, keep it up! And I'm also 20 with a 2012 speed3 same color as yours haha it's my first turbo car and this vid helped just out of curiosity what miles does your odometer say mine is at 54k mine is almost stock with the exception of a magnaflow cat back. I can't wait to get mine back, I was driving home from work at 2am and a deer jumped into me, so she's being pampered and patched up in the body shop. So glad they didn't total her, wish I could put pics on here for you to see haha sorry this comment was so long!

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Aw that blows Hunter :/ Sorry to hear that! I have 68k on mine. Glad the video could help! Good luck with the car!

  • @austinparker5155
    @austinparker5155 Před 2 lety

    i love that intro lol

  • @ChoppaTrappin
    @ChoppaTrappin Před 7 lety

    COOL I FOUND THIS CHANNEL I ALSO OWN A 2012 SPEED3 BOUGHT A YEAR AGO AND I TURNED 20 TWO WEEKS AGO HAD TO SUBSCRIBE AND DROP THAT LIKE

  • @GJHunter
    @GJHunter Před 7 lety

    Don't even own a MS3 (here in UK it's mazda3 MPS) But still love your vids, production is on point. I'd like a 3 at some point but even at 21 nearly 22, insurance here fucks you

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      Thanks a ton! Thats a bummer its more expensive. Best of luck!

  • @JimmyJ0314
    @JimmyJ0314 Před 7 lety +2

    I really like your videos bro.. I learn something new every time!! I just bought an 09 gen1 mazdaspeed 3 & wanted to ask if you would recommend the same tips for mine

    • @CameronAlford
      @CameronAlford  Před 7 lety

      +JimmyJ0314 that's awesome! Good to hear, thanks for watching them! Yeah the exhaust tips? 100% 2.5" to 4" is perfect

  • @mattconroy3918
    @mattconroy3918 Před 7 lety

    Yo yeah man love the speed three 2012. Just done a few mods but u know hard to save cash. especially in canada hard to ship parts, duty delivery blah b blah,!! just love the car!

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Thats rough but heck yeah me too. They're great!

  • @kerrykettelkamp3193
    @kerrykettelkamp3193 Před 6 lety +1

    Hey Cam, great video! Lots of helpful info for a newbie looking to mod (me). When you say res delete, do you mean a total res delete (all 3) or just the straight section between the cats? Looking for the nastiest growl I can get. Thanks man!

  • @joshdelucco8580
    @joshdelucco8580 Před 7 lety

    Hey my dude love the videos ! I thought our community of Ms3 was all but extinct at times! Keep it up !
    Quick one for you & all Corksport stage 1 power Short Ram intake is advertised as not throwing a CEL true? Perhaps because it's dry flow?
    Help a brother out !
    Peace !!!

  • @thetattedbuster6613
    @thetattedbuster6613 Před 7 lety

    Mine has a BOV and intake, no problems retuned I would suggest a Cobb tuning

  • @dylanshalom
    @dylanshalom Před 6 lety

    Just found your channel! I’m in San Diego too! I’m looking into MS3, and a couple other cars but we should totally meet up once I found something!

  • @johnwjeromejr
    @johnwjeromejr Před 4 lety

    Where were you when I had my True Red '08 Speed 3 from 2008 - 2015? I had no idea what mods were available so I contacted a local speed shop and they wouldn't give me the time of day! I ended up with a dealer-installed cold air intake and, after it was installed, they warned me against driving through any standing water in the street as the intake inlet is only about 7 - 8 inches above the pavement (living in Tampa FL guarantees you will end up in standing water sooner or later). I probably came extremely close to blowing my engine when I was forced through standing water in a busy intersection after a cloud burst. Fortunately I was able to quickly pull over (coasting) and crank the engine to blow out the ingested water. Miraculously it started afterward without engine damage but the turbo's life was compromised and had to be replaced a couple years later. I now have a 2016 Golf R purchased from a dealer with its own tuner shop so the R is now APR Stage 2 with just under 400 HP. I still have many fond memories of my Speed 3 having owned it for 7 1/2 years and nearly 130K mi. Knowing what I know now, I could have modded it much more and gotten even more fun out of it.

  • @stoneee1234
    @stoneee1234 Před 5 lety

    Good videos for people looking to get into speeds, but gotta get the modding order correct for safety sake.
    Before you do anything, first power mod should be a Cobb AP, and the mandatory reliability mod would be fuel pump internals.
    Basically any power mod needs a Cobb AP, for example a common beginner mod would be an intake, and most aftermarket intakes and inlet pipes use a larger diameter than stock, thus you'll have a higher risk of blowing the engine due to running it lean. Additionally, it is also better to go with companies that offer a OTS map with their mods to load on your vehicle if you are not planning to get a custom tune any time soon.

    • @TysonJ-gk6mu
      @TysonJ-gk6mu Před 9 měsíci

      So do you have to get a better fuel pump to keep the engine reliable while running an intake?

    • @stoneee1234
      @stoneee1234 Před 9 měsíci

      @@TysonJ-gk6mu Not necessarily, in theory as long as the map and vehicle config is stock or equivalent then you should be safe. But in reality it may be a roll of the dice thing, as there is still the possibility some cars have pressure dips under wot even while stock, especially with growing age, and it would be hard to tell without monitoring/datalogging.
      At this point in time, as a general rule of thumb I would take the HPFP internal upgrade as a prerequisite whether you are planning to mod it or not just to be on the safe side.

  • @maliksamara6676
    @maliksamara6676 Před 7 lety

    Hey dude i just want to say your vids are awesome dude. Keep up the great work man. Youve also made me want to get a speed3 haha. Hopefully insurance isnt has bad as the suby lol. Much love from salt lake man.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Malik! Thanks so much man, awesome to hear. It definitely won't be!

  • @justusroloff8209
    @justusroloff8209 Před 7 lety

    Just stumbled on this channel. Content is really good quality awesome

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Thank you dude!

    • @justusroloff8209
      @justusroloff8209 Před 7 lety

      Shot in the dark but I saw this dude that looked exactly like you at south beach yesterday was that you

    • @CameronAlford
      @CameronAlford  Před 7 lety

      On saturday at south mission?

    • @justusroloff8209
      @justusroloff8209 Před 7 lety

      At the park with the camshaft looking pole in the middle at south point park I think it's called

  • @businessmanph
    @businessmanph Před 7 lety

    you should get a short shifter. the short shifter plate is whatevers
    short shifter
    short shifter plate
    bushings
    you be good to go. feels like a video game.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      I definitely want to soon! I know what you mean by the shift plate being whatever, totally agree!

  • @Luminary_Industries
    @Luminary_Industries Před 7 lety +3

    One day I'll catch up to you! This was my next video tbh! Gonna be doing my hpfp!

  • @lanedahl942
    @lanedahl942 Před 7 lety +4

    if I have a high flow cat already on my ms3 and I have the fuel internals, intake and bypass valve and accesport do I need to retune again after every new part I put on? or can I throw all the parts on at once and do a tune straight out?

  • @BOOM_125
    @BOOM_125 Před 6 lety +1

    Dude I love you I'm a freaking noob to car tuning but this video is amazing thanks boss I'm not big on the front bumper any recommendations?

  • @francisco_plays
    @francisco_plays Před 7 lety

    I love it! I own a stock mazda speed 3 and am looking forward to getting a cold air intake. The fuel internals really hurts my heart and wallet :(

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Yeah do the internals first. It costs money now but it'll save you money later!

  • @Anonymous-po9gy
    @Anonymous-po9gy Před 7 lety

    This is awesome thanks man ... can you please make a video on making a stanced speed 3

  • @skylerhodges1804
    @skylerhodges1804 Před 3 lety

    DUDEEEE YUMAAAAAA AHHHHHH BRO WE GOT HANG OUT NO JOKES I HAVE THE SAME CSR AS YOU TOOO

  • @dwinsemius
    @dwinsemius Před 3 lety

    You should invest in tires and suspension. The stock tires were crap and your track time will improve a lot more with sway bars than with the recommended mods.

  • @marcotruitt19
    @marcotruitt19 Před 7 lety

    Channel has a lot of potential

  • @dreysonmay6552
    @dreysonmay6552 Před 3 lety

    So this video is old but I need help with my Mazdaspeed 3 I replace the alternator 2 time and the battery light is on still it goes off for like a day and then I got another one and same thing

  • @jackwaggoner4311
    @jackwaggoner4311 Před 2 lety

    Just bought a 2008 mazdaspeed 3 at 18 years old, Don’t plan on doing too much atm since I’ll be attending school but any advice?

  • @bottom_lizard192
    @bottom_lizard192 Před 4 měsíci +1

    After 7yrs this is some ricer ass list lmao . Always always always do it this way first .
    1.HPFP
    2.AccessPort
    3.Intake
    4.MotorMount
    5.Exhaust
    Finally after all that check your VVT !!

  • @yelp2334
    @yelp2334 Před 6 lety +3

    What bout a normal mazda 3 cause i just got a 2012 swroes 2 mazda 3 neo 2.0 litre and im thinking of doing some simple upgrades but im not super sure what'd work

  • @Mattvarville
    @Mattvarville Před rokem

    If there’s an intake would I need a acsess port because I know cars like earlier sti cars need a tune even with an intake and exaust

  • @oliver-9687
    @oliver-9687 Před 5 lety

    Just now watching this. I just got a 2005 Mazda 3 hatch and the number one problem I’m having is the freaking timing chain do you know of anything I can do

  • @minshull0185
    @minshull0185 Před 7 lety

    Dude your car is sick! How much have you spent on it so far? keep up the content bro

    • @CameronAlford
      @CameronAlford  Před 7 lety +1

      +jacob minshull probably 3-4k in mods I think?

  • @j4cse
    @j4cse Před 7 lety

    got full exhaust intake with tip, accessport, hpfp and rear motor mount all within a week

  • @astablishment2697
    @astablishment2697 Před 7 lety +2

    this video helped. i just bought my speed 3 a month ago and so far so good. i got the car with an intake so do you recommend the hpfp internals before i go forward?

    • @CameronAlford
      @CameronAlford  Před 7 lety

      +astablishment2697 yes 100%, until you get them baby the car and dot run it wide open at all. Thanks for watching!

    • @crazyfireboy123
      @crazyfireboy123 Před 3 lety

      Get n accessport first always first thing you should always do

  • @stonecoldstunner12
    @stonecoldstunner12 Před rokem

    Thanks for the video!!!

  • @pegasus903
    @pegasus903 Před 4 lety

    Dunno if you still reply, but got my ms3 and its completely stock. If i just wanted to get a short ram intake would i need to get hpfp internals? i would obv get if i continue modding but just for sri is it needed?

  • @AdrellixGaming
    @AdrellixGaming Před 7 lety

    What's up man, I'm Noah and I'm lookin to purchase a gen 2 speed 3 by next year, I have a 2005 2.3 S rn, love your videos!

    • @CameronAlford
      @CameronAlford  Před 7 lety

      +Adrellix Gaming hey Noah! I hope that works out for you! You'll love it

  • @nathanjarosz6306
    @nathanjarosz6306 Před 3 lety +1

    Is a bone stock Mazdaspeed 3 for 8k a good price?

  • @carterharnett6714
    @carterharnett6714 Před 6 lety

    just got an 08 mazda 3 sedan.. sadly not a manual or a hatch :( still love it tho. got some nice rims and a sound system but more mods to come

  • @gameslobby8869
    @gameslobby8869 Před 5 lety +3

    Fuel internals and access port first or you risk blowing it up

    • @gt4uk2000
      @gt4uk2000 Před 5 lety +1

      What this guy said

    • @LargoC
      @LargoC Před 5 lety

      Games Lobby fuel internals which part?

  • @sean_finch
    @sean_finch Před 7 lety

    Names Sean Finch. I am picking up an 08 Mazdaspeed 3 tomorrow. Not sure if it's a good buy or not. Please tell me what to change or look at when I first get it. Thanks! Keep up the good content.

    • @CameronAlford
      @CameronAlford  Před 7 lety

      Check out my buyers guide video! Good luck!

    • @marcov9808
      @marcov9808 Před 7 lety

      Make sure oil was changed regularly 5k miles at least per change. Check the timing chain (quick check stick your finger in the oil tank and feel how tight the chain is) if loose it will need to be changed. Check all fluids of course. And try to look for any leaks splatter in the engine bay or leaks under the car (if you can).

  • @jb6574
    @jb6574 Před 4 lety

    Warning!! Other brand aftermarket bolt ons that are not Cobb brand might not work well with Cobb stage tunes

  • @flexipino
    @flexipino Před 4 lety

    Cameron. We picked up a 2008 speed 3 with a CAI. What's the easiest way to change the air filter? Under the wheel well tire removed or take off the front bumper? Thanks in advance

  • @alynromero8729
    @alynromero8729 Před 6 lety

    What oil do you run on yours? Semi-synthetic? Full synthetic? In addition, I’m about to purchase an ETS Top mount intercooler. For me, i just dont feel a front mount isn’t worth the money nor time especially if you’re not planning on pushing serious power > 450whp

  • @JVidsReplay
    @JVidsReplay Před 6 lety

    Waspoppin Jdm all day bruv watatatataaapapap!