Aerospike Rocket Engine (3D Printed)
Vložit
- čas přidán 29. 11. 2020
- My viewers get 50% off their first month of any crate by going to www.kiwico.com/integza50
Follow me on Instagram: / integza
Support me on Patreon: / integza
Discord: / discord
Reddit: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
3D Models
Ceramic Rocket + Nozzles:www.thingiverse.com/thing:467...
Aerospike Engine (Source Video): • Additive Manufactured ...
Music
Kumare Brothers by Dialgo Artlist
Pizzi Waltz by Kadir Demir Artlist
Slime Time by Randy Sharp Artlist
Sneak Peek by Alon Peretz Artlist
Chartreux Noir by Bob Hart Artlist
Son of a Beach by The Polarity Artlist
Fela by Egozi Artlist
Concerto Grosso by Will Van De Crommert Artlist
Teenage Dream by Curtis Cole Artlist
The Treasure Hunt by GYerro Artlist
Witches Brew by CK Martin Artlist
Fiddler by Ben Phantom Artlist
Terres by Dialgo Artlist
Little Scientist by GYerro Artlist
Gettinginto Character by Oved Pinchover Quintet Artlist
El Mayor by Las Pampas Artlist
Early Dawn by Anthony Vega Artlist
Aria North by Ben Winwood Artlist
Glass Jaw by Bob Hart Artlist
Make It Rock Instrumental Version by John Coggins Artlist
Down the River of Hearts by Eyal Talmudi Artlist
Free Wheel by Rex Banner Artlist
El Ro Fluye by Reuven Bransburg Artlist
Non Piu Andrai - Ron Meixsell (CZcams Library)
#rocket #aerospike #3dprinting - Věda a technologie
Pro tip on the rocket fuel: Don't use plain table sugar. Use Sorbitol. It has a smoother burn rate and lower pressure. Also, mix the two ingredients with enough water to dissolve the sugar and heat them in a pan (VERY LOW HEAT!!). Once evaporated, you will have a lightly brown, thoroughly mixed fuel. Pour that into a mould the same dimension as your rocket cavity greased and lined with a thick paper tube. When it cools push out the fuel slug (grain as they are called) and you are ready to go. The paper tube and tight fit will help keep the flame from going around the outside of the grain and causing a pressure spike. If you need more power, push a rod into the middle of the grain before it cools. This hole will create greater surface area for the flame and the fuel will burn faster.
For an even faster burn, create multiple grains. You can use these parameters to raise or lower internal pressure to suit how much your rocket can withstand. Check out Richard Nakka's site for all the information you would ever want to know about experimental rocketry. There are a ton of resources there for anyone who is curious.
It also has the orbit in it, that alone makes it three times as potent☝🏻
excellent suggestion!
i have to add some safety corncern about the tecnique you discribe for the pit and melt the sorbitol ill suggets to use a doble bath call baño maria. just to not get the mixture in contact with any hot flame or stuff that mixture from 90 degrees it self ignite trust me i have experience
allso ill suggets to use a rasing base redox fuel that are more powerfull and more safety
This can be extremely dangerous and he can use normal sugar just needs to make it in to a powder e.g. A ball mill
Casually launches rocket in a town
ikr? I love how the neighbors have the lids closed^^
casually hopes town is hit by rocket...
Casually tests rocket fuel and ignition systems in a wood-framed attic :-)
Thats something China would do
@@incubusfan4211 woah
so underrated channel
i know, right?
he has more than a quarter of a million subscribers, not “so underrated” to me
@@yoloboogie3674 Most people who make shit content have like 10m subs 😂
@@exotikinc3397 most? name 25 then
there’s over 100 million channels that make shit content, i’m just asking for 0.00000025%
@@yoloboogie3674 I don't know that many channels, I do know nikkitutorials, Morgz, ninja, t-series, Casey neistat, faze rug/rice gum, Jake Paul, and many more.
Hey Ineska, just want to let you know you are a bright light on this gloomy globe and you continue to inspire me and through my my community to be positive, have fun and make it achieving great things that little bit easier. Thanks Buddy! Keep up the good work/life! Brilliant
One of the best things that happened this year was discovering that channel.
Thanks for making my days a little easier
Build a ground effects vehicle using one of you engines
Definitely
uhh 666 likes... is this a sign???
@@dogo7543 I changed it, now it's 667
dude but you hadn't made a rotary engine yet, had you joined a challenge to make every type of them ?
br br br br br br vroom vroom
DeLorean was about to had one, in a concept
since you made a rocket...
and joined a space race..
you should make an anti-meteor safety system!!
or.. the at least a Home Anti-Theft, anti-intruder system, crazy amount of crazy rockets will surely handle it
hehe
Integza, can you make a camera?
i saw somewhere a 3D printed lens body.
that's might be fun
and also, when you will make a video with Ivan Miranda?
Enjoy that 3d printer dude. Best idea I've seen
I think u won
I love that joke at the end! too many people would be too afraid to do that.
The hitler impression?
@@sharansavakar8569 Yes!
Lol yeah got a good laugh out of it.
I absolutely love the mix of humor and science you have here. Well done 😍
Theme: a 3d printed vacuum cleaning robot that can also mop. Also intelligent enough to not mop carpets.
Get us to 2k likes and Integza has to kiss a tomato...on his next video! 😂
A rocket powered one
@@adequitevelocity1089 where do you wish to vacuum? the moon? lmao! But i do like the sound of that though! aha!
Maybe
Well sjit, printer secured man
@@christianletzerich6523 we'll see aha
You have to be really careful with those things. I was just walking around my neighbourhood recently, and was hit on the head from one out of nowhere. Now my vision is blurry and all I can smell is caramel wherever I go. I didn't really see where it came from, but a passerby said it looked like it was launched from a roof about 300 meters away. All I'm saying is stay safe!
You cracked me up ahahah
@Norm T launched a Goat? How far? Bro you gotta give us the details on this 😆 🤣 😂
@@integza rI'm sure someone like you can easily and quickly make a decent ball mill which will grind your powders to a much finer one. I did a little research project in high school on how to make rocket candy more powerful, by looking into sorbitol, mannitol, xylitol etc. instead of sucrose, and also by adding sulfur and metal powders such as Al and Mg to the mix. Mannitol, a bit of sulfur and very fine Al powder (which you should make by grinding charcoal and Al together in a ball mill, so the Al doesn't oxidise) was the best one. Don't know the exact ratios of the top of my head.
Looking back on all the videos I watched from this channel has made New Years all the more pleasant. I'm really glad I discovered this channel a few months ago!
It makes me so happy to see one of your designs work! I enjoy watching these videos man please keep them up!
Theme: make steerable rocket with liquid fuel, or maybe (perhaps more attainable) like a multi-stage rocket.
Also I'm no expert but maybe next time launch the rocket somewhere a little less populated haha :) I laughed so hard when I saw that
EDIT: If I win the printer, I will learn fusion 360, design and print a tomato, and take a bite out of it.
Let's make it happen.
Yeah no scratch the very first one, multi-stage rocket is a way better (and possible) idea
stop hacking likes to win
Hybrid rocket...
Plastic as a fuel.
Decomposing of hydrogen peroxide as oxidised.
For steering... Spin rocket, and let extra gas out on side of rocket. That changes the direction of thrust.
@@stevecummins324 clearly you're smarter than I am haha
that sounds cool
@@daives01 hey ok I trust you but can you and your people help my friend to win please its name is santiago larrain and his comment is no more than 2 hours ago plaese??
You can 3d print ceramic parts? And you chose to make an aerospike? That is so freakin awesome!
How dare you??? NO ! YOU'RE ARE AWESOME!
AH! GOTTA GOOD
@@integza ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Bigger aero spike needed
@@integza zrub to
z ceramiki lub z masy solnej
The ceramy cant withstand the high pressure
RIP, Grant Thompson. Thought of him when Integza was talking about sugar rockets.
same
Yes same here.
Same
Great project, great comedic timing, great guy overall! You gained a subscriber, keep going!
Bruh he just straight up launched exploding rockets in the middle of a city
My kind of guy
hahahaha that was cool
And no one cared what a country
Theme: Electric Jet Engine (turbojet or with air bypass). Use a brushless motor from a vacuum cleaner (100k rpm) to drive a compressor. Jet fuel on the combustion chamber and don't use a turbine at the end. Let all the hot gases get out of the nozzle! This could be a cool project!
👍
Yes, why not
This is the worst idea i've heard in my entire life.
@@user-le7gs9rv9j hahaha bro, u crazy crazy
Your idea is easier than mine! [actually I am already planning how to build a fully ceramic composite jet engine housing at full scale!]
I just want to see if the ceramic can handle the heat too!
/)/)
( 'ˬ')
@(>_ )-b
\) \)
That rocket exhaust out of the aerospike was absolutely gorgeous!! I'm sure you got a big sense of pride when seeing too knowing something you made did what it was designed to do,mostly!
I really hope to see more of this project! I love that you're going with the aerospike design!
Integza: i dont wanna buy a kiln cause its tooo expensive
Also integza: so basically i am giving away three 3d printers
Hmmmm... how about building a new kiln using Aerogel or aerated-concrete. It seems to me that if you want to get more extreme ceramics might be in your future.
Post Hmmmm - if you 3d printed a ceramic kiln liner that could be the foundation around which you could place the insulation.
@@alphabravo3683 printing the lining is massively cost prohibitive. 3D printing excels at producing items of complex geometry for cheap (compared to tooling up for mass production or machining traditionally) but it is not the tool for bulk material (such as furnace lining). Just one liter of SLA resin costs anywhere from 60-150$, and given that ceramic resin is likely a lot more advanced than conventional resin, i would not at all be surprised if a bottle surpassed 150. On the other hand, kaowool lining (refractory wool) can be had for about 100$ for 24"*12"*2" which is sufficient to line a small furnace in its entirety.
@@alphabravo3683 Could also make one(a kiln) with some starlite material for very cheap, technically a forge but you could dial back the heat to turn it into a kiln.
reference video czcams.com/video/FmEb1YZScxc/video.html
maybe he just prints the 3d printers???
Yo integza,
Make a rocket with tomatos inside , so if it fails atleast the tomatos will be destroyed so no loss!!
Remember kids , tomatos as the most DISGUSTING guuy thing in the world.
Lol enjoy your printer mate
My he so hated about a tomato leave him alone man
Mmmmmmmmmm
I want the 3d printer give me plz
JORGEEEEEEEE
If you are familiar with the film 'Hunt for the Red October' the plot focuses around getting a Russian sub with a new type of propulsion system called a "Caterpillar" in the movie. If I remember right it basically used an Archimedes screw to propel the submarine with little to no cavitation, thus making it run silent. That would be kind of cool to explore.
I've always wanted to build Rockets but you've inspired me to actually do it. Thank you integza.
“She likes k-pop and I like explosive engines”
y e s
Theme suggestion:
You have been working so hard to create a good pulse jet/rocket engine, why not put your knowledge and hard work to the test, make a plane powered by one! It has to be able to carry its own fuel, and have at least 30 seconds in stable flight.
Along with this, another idea is to use your micro controller skills to rig it with a functional steering system. Then you can try your luck at perfectly crashing it into a tomato.
You’re videos keep getting better. Parabéns! :)
Fantastically entertaining videos Integza! A helpful tip though - your rockets will go in a straight line if you make sure that the rocket center of thrust is forwards of the rockets center of area
Also spinning stablizez it.
Why don't you build a machine that makes surgical masks, it could be very helpful in this period!
Or maybe build a vacuum machine that makes tomatoes explode, cos' tomatoes are fricking disgusting ahaha
...
Tomatoes are disgusting!
idk why but everytime i write machine my smartphone corrects it in macchin lmao also vacuum*
That's a nice idea
*Surgical
Slap that phone
@@NaughtyShepherd i Will 😂😂😂
@Joshua Denning because they are disgusting eeeew
Theme: You should build a miniature manual transmission!
Absolutely great videos. Keep them coming, good sir.
Integza, I have 2 challenges for you!
3d printed flamethrower
Or
A fully 3d printing EDF ( Electric duct fan basicly a electric jet engine)
only parts excluding parts are wiring and stator shaft
Maybe use ceramic resin for the rotor and carbon fibre filament for the casing?
You beat me to it...
Didn't he do that all ready? 🤔🤔🤔🤔
@@conor1475 I don't think so, maybe tho, I thought it would be a cool idea
Maybe to make it Christmasy. make it look like a sled or make a few and lift a mini tree 🌳
Yessssss
Integza: "This video does not have a happy ending."
Me: *grabs popcorn* "This is what I subscribed for."
2/3 rockets exploded “calls himself a rocket master”
That’s probably what happened at SpaceX too, I mean you’re dealing with the one of the most dangerous device on the planet
@@kerbodynamicx472 nuclear scientists
Your standard X Ray tech is in more danger daily than a rocket scientist
For anyone not living in Europe, please take a time to admire those beautiful buildings around Integza's balcony. So lovely.
Use a small rocket to lift a steel cable deeply conected to earth in the middle of a storm. Have a bucket filled with salty water between the earth and the cable to instantaneously create HHO when the thunder strike the steel cable.
And admire a nice explosion ! :D
PS : Do not do this from your balcony this time :D
PS2 : This ceramic resin looks awesome
PS3 : Upvote if you wanna see the world (or bucket) burn !
Ridders on the storm
Here's a salty comment for you
Or better, use a pure silver wire!! :O
“Like that smash button”
Liked for that ‘smash’ button
You mean smash that like button
@@Randomperson0467 NO, I meant LIKE that SMASH button!
Your are great and very simply explain tough works with nice story and entertainment. Keep it up.
A University in Hull, England is doing something interesting that you could use a 3d printer for: They are experimenting with using compressed air flowing over a rod (perpendicular) to direct the jet of air to use as dynamic controls. When the air passes over the top of the rod, boundary effects pull the air downward as it leaves the device. Downward movement of the air acts like down aileron on the wing. Passing the air under the rod has the opposite effect.
You could also use the printer to experiment and make better propellers for RC aircraft. I would try to make a Prandtl style propeller for greater efficiency and reduced noise. Would be handy to have these on a quadcopter drone to reduce noise.
My psychologist:
Mustacheless Integza is not real, he can't hurt you.
Mustacheless Integza:
14:20
He looks like a young Till Lindemann!
@@TAlexBlack thank, now I can't unsee that haha
I see Inetgza's neighbours are smart enough to have boarded the windows facing his house.
Theme: create a piston that entirely runs on rocket engines
no
Yes
kAN made one is Scrap Mechanic
this got me excited as a kid! thx !
Try making a 3d printed gasoline engine for your next video.
And never ever shave again!😂
If I get 1k likes Integza has to eat a tomato.
⬇️
Looking forward to it 😂
Not funny Didn’t laugh
What? You don’t want to see him eat a tomato?!?
Y’all better like this comment
Remember last time he said he’d eat a tomato he didn’t
“Noooooooooo” Jorge’s motto from here on out.
hehehe
I need that printer dude!
You comment on every science video i watch lol
U should build a vehicle that runs on a HHO generator
"Ha ha ha, Let me show you its features"
I hope you all are doing good and enjoying the holidays!
I think making a 3D printed Plane (maybe using a jet engine?).
Love watching your videos and have an amazing day
Great chanel! It is amazing seeing someone combining knoweledge, entertainment and visual in one video.
Theme: solar concentration mirror, Stirling engine, electric generator.
🤓😁
Greetings from Portugal! 🇵🇹
Two videos in two weeks? Awesome!
I know right!!
You should definitely do more videos using sugar rockets. I have 2 themes: you should upscale the rocket and attach a parachute. And you should attach the smaller rockets to an RC car or plane and use them as missiles.
Nice first downrange test for the Integza Space Program!
So I used to make something.similar to this when I was a kid, about 30 years ago.
I found that one way to get a nice even consistent burn, was to melt the potassium nitrate, and sugar mixture, and pour it into the rocket. When it cools, it's a solid.
Also, I used rolled paper for the rocket body, since we didn't have 3d printers.
Amazing Video!!! imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao. You have a rocket now, why don't you build a moon rover? So you can use solar panel too. Not a real one, but a little space roover with arduino stuff
imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao
jajajajajajaja his neighbors hate him 😆😆😆😂 🤣😂 🤣😝
Theme: rocket that doesn’t explode and potentially has a parachute.
good job that was a beautiful launch
I love your sponsor segments. Always a laugh and i always watch the whole thing. Do you write them yourself?
Project Idea: GROW YOUR MUSTACHE BACK! It looks great, never shave it off again!
Or grow a Tesla moustache😁
@@jasonsummit1885 But he is not an imitator! And Tesla never was! So - to be like Tesla, never be like Tesla!
Theme: Giving all us subscribers free 3D Printers!!
(He said he would do the themes that win, lol)
Please vote for this theme, it ought to be a good one :)
Pro gamer move
Portal: GLaDOS says you get cake if I get 3000 likes #thecakeisalie
Glad I found your channel today! For a theme it would be awesome to add a launch escape system to your rocket. Secondary theme: tomato seeking rocket for maximum tomato destruction.
Good luck Boy, very soon your channel gona be veeery big.
Why don't you build a kiln? You could use those white bricks they use in forges. Add a temperature monitor and an arduino... bob's your uncle you have a controllable kiln!
I suppose buying a replacement or getting one second hand is more practical, but isn't the point of the channel to be creative and do things your own way?
How sexy
@@johngoldberg8949 It's less about reinventing the wheel and more about being able to do something for yourself. I'd be more interested in watching a video where he makes the rocket, the propellant, and the nozzle rather than just buying an optimized setup and showing it off. It all comes down to personal preference but I was drawn to this channel because of it's creativity and willingness to fail.
If his 3d printer broke I would want him to fix it in a quirky and interesting way too. I have nothing against store bought but making something cool simply because he can is just what I've come to expect from him. Someday everything breaks; if you can, I believe you should fix it.
This dude rolls the hardest R's I've heard in an ad ever. Nice.
Tis’ the Power of the Portuguese
@@WingofTech ngl I thought he was Italian
@@apocadood2099 Understandable, the more Latin, the rollier ‘R’s I think. :3
hard R's for life 😏😏
I'm very glad I found your channel. Your videos are very entertaining
I suggest you revisit the pulse jet but casting one from a one of your 3d models. Marry Christmas Integza and community.
It would be awesome if you make an Trebuchet
Next theme should be a magnetic rail gun, would be really cool
@Degrasword call it an orbital payload delivery system test
Try reinforcing the bottom part where the pressure builds up with metal rings. That could help prevent them from exploding if you make rockets again in the future.
Why am i only just finding this channel i could have been watching all of lockdown had i known!
I really appreciate seeing the various steps in engineering here. Many other videos talk about start, making, and end results, but you go through all the failures as well!
Found your channel today. I love it!
Keep em coming!
Lots of You-tubers will love it!
Dude... I love watching your videos. Not only do we have the same idol (Tesla, who did you think I meant?) but you are damned entertaining!
"I still have a lot to learn when it comes to rockets. Especially in terms of safety."
integza's neighbors, currently ordering rocket-proof umbrellas: you can say that again
Portuguese intelligence noticing a sharp increase in rocket proof umbrellas in the area: "ladies and gentlemen, we got him"
That was an amazing aerospike engine, I would love to see more of them.
very impressive exhaust plume geometry.
Yeah, me too.
Yeah, the flow went exactly where it was supposed to. I was impressed. I think the failure may have been due to the solids in the exhaust stream blocking the "throat" (ring in the case of the spike?) and changing the constriction. I could easily be wrong though, I'm no rocket scientist...
@@deltab9768
My daughter in law is. She did her PhD on some esoteric aspect of rocketry, but she worked, initially on wind power turbine design and now she’s employed in fusion research. Formidably smart young woman and super mum. I don’t know how she does it.
Love your channel, your failures (what us tinkerers call "learning moments") and your great sense of comedic humor. However I have to side with your tomato overlords, they are delicious and awesome.
The world needs more of you and people like you. With sound legal counsel, I'm certain you will find financial reward with some of these ideas of yours. Not sure how patents work in your country, but you should patent every single original design. Ceramic coating in those rocket bodies, with perhaps a metal sleeve insert, and you have a policy changing device. I speak where I should not. I am your pupil for now, and I thank you.
This is the best KiwiCo advertising I've seen Integza. Well done!
Theme: A vortex cooled rocket engine
Theme: make a full-flow staged combustion engine.
Beat that Elon's raptors!
You are a great creator with special rare humour! A great project with the new tools you got I think would be the tesla thermo magnetic motor!
Wow awesome, flame flame flame, I love it, try to build an rpg launcher, it will be outstanding *_* BOOM BOOM BOOM
Yeah that's illegal
Man, your vids are the best!!!
Great video keep up the good work
Hi, Integza - Thanks for your great projects and terrific presentation - I love them.
I used to experiment with rocket fuel, nozzle designs, and rockets (the non-Estes kind) when I was a kid. A friend of mine did too, in his own basement and back yard. Fortunately, I survived the experience with both testicles intact. Unfortunately, he lost one of his during his experimentation when he dropped an ignited engine and it exploded about 90 cm. off the ground.
Please be careful!
By the way, tomatoes are great! Love 'em.
"These are gonna blow up"
rocket: how bout no
Theme for a future vídeo: making an eletric fan jet engine, you can make a scramjet engine with sheet metal and some holes for the fuel intake, and put an eletric drone motor in front of it for the compression of the intake air, you wold have to learn how to bend and weld sheet metal, that wold be sooo amazing to watch.
Also... Oi Integza! Obrigado pelo conteúdo incrível, me inspira muuuito asistir seus videos, mas não tenho dinheiro para investir nos meus projetos... Um dia espero poder fazer projetos como você e me divertir criando e aprendendo, muito obrigado e abraços do Brasil!!
Build an entire 3D vehicle engine that could fully operate on its own. That would be epic!
I personally want to try it. Like part for part of an entire vortec engine that's usually in a Chevy truck. Awesome!
Hey Integza, I love your videos. I think recreating a mini electric car that uses solar panels to charge as it goes would be a fun video topic.
[Video Idea]
Make a skateboard or bike powered by rockets :)
@@czrptr6849 🙏🙏🙏
dps emprestas
@@JoaoRodrigues-kv9lu empresto mm
*Skateboard goes skkr*
I want to see it!
if you can make a working cylindrical tesla valve you have to absolutely try it as a nozzle for these rockets! in a video from Nighthawk called Tesla Valve Explained With Fire it looks like the flow actually accelerates!
Loved your style! So you got my sub!
Keep up the sweet videos 🔥🙏
I would like to see you make the best 3d printed spud gun or canon of all time.
Theme: It would be really cool if you explored the challenges of flying a helicopter on Mars, like the Ingenuity will be doing next year. You could use a vacuum chamber to simulate Mars's thin atmosphere and 3D print a whole bunch of helicopter parts. I think it's within the scope of stuff you do!
You've made a rocket but can you make a rocket that launches a tomato?
3k likes and Integza has to marry a tomato 😳
Better make tomato launcher like potato cannons.
Forced comment bro
You are asking for likes
3D printed sub drone !!! Love your stuff, and keep the moustache (I am french and we love moustaches)
Loved the video. A basic steam engine would be awesome!
Tomorrow in the local news: "Stray homemade rocket kills puppy!"
Stray rocket destroyed tomato garden
@@nikolausluhrs good
There's people who really knows how to make education content in a funny and awesome way. I learn more with you and Electro Boom than in the university here in Brazil 😂😂😂
That ceramic resin is awesome
It would be really interesting to see another rocket design. I'd say liquid fuel but that's way beyond the scope of your videos(no offense). Solid fuel is still really cool.
I think I'd enjoy a compilation of a lot of rockets with slightly tweaked stats launched and then a conclusion of what design is best. The stats could be varied, like the exhaust compression, the solid fuel, The amount of fuel, etc. Though for such a project, I think you'd need to make an assembly line for rockets at least... Lol
Good luck tho, and merry Christmas!
The sentence “speaking of useless children, here’s today’s sponsor” is my favorite and I’m gonna use it all the time
Kill the child, boil him, mash him, stick him in a stew