I make a thread copier
Vložit
- čas přidán 6. 09. 2024
- Any type and any size of thread can be copied with this machine. It can even be threaded on a conical workpiece. any size of thread on any size of shaft.
Welcome to INNOVATION TIME.💐
I try to make some useful diy tools to doing job easier and faster. These diy tools is for metal working and welding projects. Many ideas for making diy tools you can find here. If you have diy tools idea for this channel, comment me please.
I have made a thread copier. we need two chuck and two bearings. I know it can be made better than this, but I have some limitations and I made this tool idea in this way. For example, bearings place should be machined and bigger Chucks should be used. Having a lathe machine is my old dream, that I couldn't buy it yet.
Your support will allow me to have more and better equipment to better implement such these ideas.
To support this channel, use Super Thanks and pay the membership and share this video with your friends.
Make this diy tool easily 😉
Support this channel with likes and comments 👍
Please don't forget to subscribe 👆
yun.ir/1v78ad
Playlist:
• Bearing puller
• DIY
If this video helped you out share it with your friends 👉
With some tweaks to take out any slop and kick back I can see this being useable to copy big threads for vice making.
🙏🙏❤️❤️
My first thoughts when watching this was that's quite a bit of butchery, but it really is a fantastic idea and like most of the other commenters said there's room to improve on this and make a really good simplistic thread cutter. Good luck and I hope you get your lathe soon
Many thanks bro 🙏🌹🌹
your 1st thought is correct , butchery is right , hack , grind , weld up some junk to make more junk... oh and welding on bearings always makes me giggle....
Ilmu yang bermanfaat😊
The concept behind this is quite clever. I have a plain-turning lathe which can't cut threads, but with a similar setup, I could probably make something with a set of common inserts (M6, M8, M10, etc) to be able to do the job. Nice work!!
Hello dear Dax
I am also building a lathe that cannot make threads, which will probably be ready in a few months😉
7
try a cutter for key duplicating machines
@daxmakes Interesting, I have a similar predicament. Picked up an antique Drummond lathe with missing change wheels. I was looking around ideas to get around re-manufacturing the original gear train. Have you tried to set this up, and what are your thoughs of how this could be integrated to a lathe?
@@computername I have not yet, as I haven't had a use for it, but I'm still adamant is could be done. You'd need to find very high tolerance nuts and bolts to use as your 'master', though.
Misas sinceras felicitaciones por una excelente idea , cuando se aúnan ingenio con necesidad la capacidad del ser humano es asombrosa , apartir d este dispositivo con ciertas variantes acordé a la necesidad de cada quien , trabajos q se encarecian yo o cualquiera los puede realizar con un costo mínimo , desde Virrey del Pino , la Matanza, Bs. As. ARGENTINA un gran abrazo y que sigan los éxitos 👏👏👏
Thank you dear Victor 🙏🙏🌹🌹
Creative n looks like slower feed rate is what does it might suggest some form of dead stop on cutter so you could repeat cut at same depth a couple times...dust off material
👍
Excellent idea. I can see a variation being used to cut very large threads in wood for wooden screws and other parts. The template thread could be as simple as rope or cord wound around a mandrel or even just a helical mark made by hand to guide a .pointed indicator. The cutting side could be a wood router with a V-shaped cutter.
🙏🙏🌹🌹
stop encouraging this goofy solution to a problem that does not exist ...
It's 100% perfect copy paste program of thread
Sem sasional da hora parabéns pela sua inteligência
Thanks 🙏🌹
Brilliant!. For the home workshop, that's it
🙏🙏❤️❤️
Your idea is indeed good , you can be called a genius . greetings friends from Indonesia 🙏🙏🇮🇩🇮🇩
Thank you dear Dewa 🙏🌹
Using the law of averages on your nut, very precise threads can be made using very similar methods
Very Nice Job 😎
Thanks 👍💐
Excelente vídeo, GRACIAS POR COMPARTIR, la creatividad de sus ideas, no tiene límites. GRACIAS !!!
🙏🙏🌹🌹
Brilliant Idea, I think it is applicable for big threads only 1.5, and 1.75 due to disc thickness.
👍👍
Kereeeennnn dan mantaaaap sungguh ide yg sangat cermelang tinggal di Sempoornakan lagi Mas Broo👍👍👍☺️🇲🇨🇲🇨
A idéia é ótima!!! Se fizer as peças mais centradas e com menos folgas ficara perfeito!
Obrigado, meu amigo🌹
Excelent idea. Thank u for share iit ✌️👍
❤️
Esse ultrapassou os limites vai pra Naza ❤😂
👍❤️
Wow. Smart. Love it
Thanks 👍
EXCELENTE!!! PARABÉNS!!!
👍👍👍👍👍👍
Thanks 👍
Technically you could make a lathe style cutting tool from a hss drill bit and add it to the cutting side because you basically have a crude lathe machine
👌🙏
please do not encourage this junk.
Very good idea. I do this on my homemade lathe.
👌
How about adding a smaller pulley at the end and connect to a motor then weld a collet to hold the cutting tool in place ,I think it would work perfectly
good idea 👍
I haven’t read any comments so forgive me if these points have been mentioned. Threads have a precise angle that must be met by the cutting tool which varies by the thread type. The depth of the thread from crest to root is just as important. I won’t even address concentricity
Thanks dear Stryker 🙏🌹
I got it 😉
Muito engenhoso. Parabéns.
Thanks 🙏🌹
¡¡No termino de entender este desperdicio de inteligencia y evolución humana a estas alturas!!
Este video me recuerda, cuando el hombre primitivo en su origen, mirando, y estrujando su gran cerebro al contemplar un piedra semiplana, y empezó a quitarle las puntas, las aristas más protuberantes....y "Eureka" La rueda.
¡¡Eso fue un gran descubrimiento!!
¡!Pero lo de este video....es un puro, y vano entretenimiento!!🥴😜
❤
ذكاء عالي ماشاء الله الله ينووور عليك ❤️❤️❤️👌👌👌👌
🙏🙏❤️❤️
You are a genius, congratulations
🙏🙏❤️❤️
The Idea is true, if you modify the disc in 60 degrees for metric system or 55 degrees for English system you will grow better screw
👌
Thanks bro 🙏🌹
GREAT GREAT JOB, SIMPLE AND CLEVER. GOD BLESS YOU.
🙏❤️
Boa noite amigo excelente vídeo ótimo projeto muito top gostei bastante parabéns pela criatividade.
🙏🙏🌹🌹
Very nice idea 💡 and there implementation.
🙏🙏❤️❤️
N’eur e t’accatt na barr da nu metr. Quand casen!! 👍👍👍
An ingenious idea. I expect some one will refine it.
👍
I bet the NASA engineers would love to have this in their research and development lab.
👍
The idea isn't the problem, the cutter is. You need to be using a thread cutter to actual cut the treads. And with that type cutter, you will also need a way to adjust how deep you initially cut them. It takes a few cuts to get to where you will have workable, useable threads... Grinder cutting disc don't have the proper "V" groove to make such thread cuts. And even if you had the proper "V" groove cutter, it would take a lot of power to cut the threads, meaning more HP on the spinning drive motor. But keep experimenting. You will get it working...
Thanks bro 🙏
Inechtin smart good 👍 work
❤️❤️
Nice, nice
Thanks🌹
Good idea 👍👍
🙏🙏❤️❤️
Geneious
Thanks 👍
Excellent work brother 👍👍.
Thank you 🙏🙏
You ever heard of Lagonda. They made custom bolts. Extremely expensive. You could make a fortune making them.
👍👍
Can you do the same to Cut Acmy thread ?
👍
Brillant idea, iam very thankfull for this idea
🙏🙏🌹🌹
Clever build. We shared this video on our homemade tools forum this week 😎
👍🙏
Почему не используется плашка и все?
😅👍
Muito bom valeu muito obrigado!!!.
❤
Kreatif ide yang jarang diketahui orang...benar benar bagus👍👍
Thanks 🙏
А что именно хорошо? Рукожопство? Идиотизм?
É muita inteligencia parabéns
Obrigado, meu amigo🙏❤
Surfing CZcams, seen your video, have comment: I would have to give you a GONG, GONG, GONG. You chasing your tail here, all you should do is weld up a tool post holder (install a nicly ground thread cutting bit) and adjustment screw. Put a large hand crank in the place of the drill and make it all done by hand. Remember the machinist hand book says about threading crews, feed it in at 29 1/2 degrees. Anyway interesting concept for a all manual or hand made threading machine tool. Scrap the power tools all together and be a real caveman dwelling innovator.....lol. ;-))
❤
surfing also ... and i wish these videos would show the finished project first and how they are used to solve a real problem.
before wasting our time watch sparks fly to make some butchered up junk.
VERY GOOD
Bravo Turkey İzmir selâm 👍
Thank you dear Hayat 🙏
جيد يا صديقي فكره جديده ورائعه
شکرا 🙏🌹
Thank you for sharing! I too have a lathe that cannot cut threads. This will help me. Thank you.
👌❤️
❤ super 🎉😂😊
❤️
Ingenius
❤️
VERY COOL AND USEFUL THING, WE SHOULD TRY IT AGAIN
👌
Это "изобретение" на орден Полуляха второй степени тянет...
Genius
❤️
Very clever
Le concept est bien sauf que le produit fini laisse a désirer en terme de qualité, bravo.
Excelente 👏😀
Thanks 🙏
Tanto lío para hacer una rosca.lacompras y listo 😂😂
😉
Very nice
❤️
That device clearly does not make a very good threads.
❤
สุดยอดขอบคุณครับ
🙏🌹
Interesting concept!
🙏🙏❤️❤️
Se o assunto é máquinas e dispositivos, tamujunto, parabéns, inscrito & Like 1.5k
Brother, if I want you to make an auto machine, can you make it? I am from Pakistan and you
Hi dear Ayoub
I'm from Iran.
I think that I have not enough equipment for this
You are a Genius! Besides ,It looks so great!
Thank you dear Cristian 🙏
Creative video, thanks for sharing it :)
❤️
Clever
❤️
The concept is great but the execution is terrible. I'd rather spend the money to buy the appropriate sized tap and die than try to cut threads using this contraption. Far simpler and easier.
the concept is ..... i have a welder , angle grinder , scrap metal , a video camera and a lot of time on my hands. ,,hummmm now what kind of contraption can i butcher up. ??
Quanto custa uma paradinha dessa
❤️❤️
This guy haven't heard of threading die?
I have some dies but none do them doing that
Any size
Every step
Conical thread
i would have been impressed if he used the grinder cutoff wheel to cut the bolt threads off and weld the threaded portion to the mild steel round stock ....LOL
I loved the idea!
Congratulations!
❤️
👍👍👍
Ok khi k có máy tiện
👍
Parabéns amigo uma ótima ideia viu
🙏🙏🌹🌹
Sería genial con un motor de microondas
👌👍
I like your innovation and desire to produce, Good Work.😊
Thank you dear Dave 🙏
К доктору, срочно к доктору Дью его!
👍
Show de bola
Amazing! I need to find spare parts
🙏❤️
Very very good
Thank you my friend 🙏❤️
Its called "Thread Milling" and its olde.
The runout is bigger than the thread depth. Really?
Hello my friend
I made this tool with a mental design and I have never seen anything like it before
If you have seen a similar tool before, please let me know
Thank you
РИЗВАН ДИГАЕВ
1 секунду назад
лучше сперва показывать конечный "результат" заинтересованный потом бы просмотрел-бы
👍
👏👏👏👏👏👍👍👍👍
❤️
1:12 гайку лучше надеть перед тем как отрезать
👌👌❤❤
it ain't pretty, but those do look like threads ;-)
If you can't get the right size die,, and, even if you can, they can be damned hard to use in those big sizes!
👌
Creative idea!! Very well done my friend! 👍
Many thanks bro 🙏🌹🌹
ძალიან კარგია მადლობა
❤
Great work
❤️
Cleaver idea!
🙏🌹
Appreciate it man,nice work 👍👍👍
Muito bacana parabens....
obrigada🙏
👏👏👏👏👏👏
❤️
Creative mind.
Thank you dear Robert ❤️
can make improvement
👍🌹
This is how some old lathes used to machine threads.