I followed these steps and it worked on my 21 Stelvio. At first I thought it didn't because the entire Christmas tree lit up. I placed it in reverse moved it 20 feet and turned it off for 10 minutes. When I started it again all lights were off...its been perfect since
Thanks for the video, im getting ready to replace pads and rotors front and rear. Does the Multi scan ECU program have an option to reset oil change service reminder?
I did my front brakes and rotors without using service mode or disconnecting the battery.....all that is for the rear brakes and there's a way to do it without service mode
If the abs detects any air difference when the car is on it will throw a permanent code in the abs module. This videos is for the front a rear overall procedure. If you don’t disconnect your risking getting the code and it’s not an easy one to remove. I’ve seen 4 in the last 2 weeks on the FB groups and 2.0 chat stuck with abs lights in their dash because they pushed back the calipers and the car mistook it as air change in the brake system. Unless you have the software to clear don’t chance it just disconnect.
@@JaidenStylezTV do not do not do this without disconnecting the battery. You’re asking for getting towed to the dealership. You can message me on IG alfamods512 and I can send you a list of screen shots of people who tried and can’t get the codes cleared I’m trying to help you.
Thank you for the video. I was looking at getting a Stelvio. Are they fairly reliable? Just nervous on getting an Italian car. They are very beautiful.
I just did my front brakes yesterday (12/16/23) and every code came up. I researched the internet for solutions and found your video a day late. I am interested in getting the "Gray Cable" but can not find one in the U.S. on Amazon. Could you please provide a good link for the correct gray cable. Thank You. 2018 Alfa Quad with a manufacture date of 10/2017 so should not have a SGW.
amzn.to/3NxCx7R Here you go it’s in the package they don’t sell it individually You still need the obd2 to laptop cable to put the grey adapter on I recommend the obd SX
Hei, I dont understand how you pomp the brake without the batery beeing conect if the Giulia brakes are electronic, the pedal its not atach to any liquid circuit
Just trust me and do it if not you will end up with abs codes that need software or a dealer to remove. It does push the caliper in even with the battery off.
@@skullofserpent5727I just went on Rockauto, I went with the daily category, they’re still holding up. However they squeak when they get too but they have great stopping power.
If you don’t know how to remove pads you honestly shouldn’t be doing this brake job they fall right out after you remove the pins. If you mess up you will trigger ABS permanent codes and your calipers won’t work. I’ve had at least 4 independents mechanics contact me after they do the brake job and can’t clear their clients codes so I highly suggest you take it to Alfa before you end up paying a ton more. It doesn’t bother me that you said the video sucks, Just take the advice so you don’t end up paying a ton more when you can’t clear the codes. Even high end diagnostic tools don’t work, only MES and dealerships Witech.
I followed these steps and it worked on my 21 Stelvio. At first I thought it didn't because the entire Christmas tree lit up. I placed it in reverse moved it 20 feet and turned it off for 10 minutes. When I started it again all lights were off...its been perfect since
Solid videos brotha 🤝 I’ll use it when I do my breaks that are overdue 😂
Very usefull, thank you! :)
Thank you!
Thanks for the video, im getting ready to replace pads and rotors front and rear. Does the Multi scan ECU program have an option to reset oil change service reminder?
Yes it does! It’s pretty cool software. Thanks for watching!
I did my front brakes and rotors without using service mode or disconnecting the battery.....all that is for the rear brakes and there's a way to do it without service mode
If the abs detects any air difference when the car is on it will throw a permanent code in the abs module. This videos is for the front a rear overall procedure. If you don’t disconnect your risking getting the code and it’s not an easy one to remove. I’ve seen 4 in the last 2 weeks on the FB groups and 2.0 chat stuck with abs lights in their dash because they pushed back the calipers and the car mistook it as air change in the brake system. Unless you have the software to clear don’t chance it just disconnect.
@@alfamods2.0T did the fronts last year, never had any lights, haven't done the rears yet
@@chrisianiero3511 can you tell me step by step how you did this
@@JaidenStylezTV do not do not do this without disconnecting the battery. You’re asking for getting towed to the dealership. You can message me on IG alfamods512 and I can send you a list of screen shots of people who tried and can’t get the codes cleared I’m trying to help you.
Thank you for the video. I was looking at getting a Stelvio. Are they fairly reliable? Just nervous on getting an Italian car. They are very beautiful.
Those leaves on top of opened reservoir gave me slight discomfort 😂
Looks like my 2021 stelvio don’t have drive assistant menu , and cannot find the break service mode , any solution ?
Check passive safety
I just did my front brakes yesterday (12/16/23) and every code came up. I researched the internet for solutions and found your video a day late. I am interested in getting the "Gray Cable" but can not find one in the U.S. on Amazon. Could you please provide a good link for the correct gray cable. Thank You. 2018 Alfa Quad with a manufacture date of 10/2017 so should not have a SGW.
amzn.to/3NxCx7R
Here you go it’s in the package they don’t sell it individually
You still need the obd2 to laptop cable to put the grey adapter on I recommend the obd SX
@@alfamods2.0Tdo you have a link for that? 🙏🏽
With euro compulsion if the codes come up I just clear it off 🙄 but we good over here !
Glad you have a good way to use your tuning device smart thinking for sure!
Do you have a link on where to get that snake badge you have on your fender
Sure thing
madnessautoworks.com/index.php?route=product/product&product_id=300013316&tracking=alfamods
what rotors do you recommend as a replacement option? i prefer drilled and/or slotted. thanks
I recommend stock, but for cost savings R1 with the slotted or geomat, stay away from drilled.
Hei, I dont understand how you pomp the brake without the batery beeing conect if the Giulia brakes are electronic, the pedal its not atach to any liquid circuit
Just trust me and do it if not you will end up with abs codes that need software or a dealer to remove. It does push the caliper in even with the battery off.
@@alfamods2.0T thnx 4 answer, 🙂
@@alfamods2.0T I make a litt reserch and you very right. Its conect to 2 pomps even i its no electricity. Nice video
I got those two things. How do I get the software for? Which website do I have to go to?
@@princesssamaraandiqra5393 multiecuscan.net
@@alfamods2.0T thank you can you recommend those brake pads?
This software do you have to purchase?
@@princesssamaraandiqra5393 yes it’s 50 euros I linked the website if you still can’t find it google multiecuscan
@@alfamods2.0T ok thanks you Mac book will work
What’s the rotor dimensions for a 2020 Alfa Romeo Giulia Q4?
I’ve looked everywhere to find an alternative to dealership prices.
I believe euro compulsion has it on their site
@@skullofserpent5727I just went on Rockauto, I went with the daily category, they’re still holding up. However they squeak when they get too but they have great stopping power.
this video scks doesnt show anything how to remove the pads..
If you don’t know how to remove pads you honestly shouldn’t be doing this brake job they fall right out after you remove the pins. If you mess up you will trigger ABS permanent codes and your calipers won’t work. I’ve had at least 4 independents mechanics contact me after they do the brake job and can’t clear their clients codes so I highly suggest you take it to Alfa before you end up paying a ton more. It doesn’t bother me that you said the video sucks, Just take the advice so you don’t end up paying a ton more when you can’t clear the codes. Even high end diagnostic tools don’t work, only MES and dealerships Witech.