Doodlebug minibike gets a Juggernaut super 30 series driver/torque converter/Tillotson 212
Vložit
- čas přidán 7. 09. 2024
- Doodlebug minibike gets a Juggernaut super 30 series driver/Tillotson 212
Installed a Juggernaut torque converter on the Doodlebug/Baja racer minibike with a Tillotson 212. Did some 0 to 30 MPH snd top speed runs to compare the Juggernaut/ torque converter to a standard 15 tooth Max-torque clutch.
Music- Luke Bergs - Tropical Soul _ Background Music No Copyright (Chill)-pP62ZVoEn2g
Instagram - doubledown555black66
___________________________________________________
Parts used -
Super 30 Series Driver - The Juggernaut - www.gopowerspo...
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Wow that juggernaut does make it faster!
Hey Black try removing the red spring and get a green spring and put it in the 3rd hole and do a before and after video and see how much of a difference it makes.
I thought about doing a video on that . I have a couple with the red and green installed already .
These videos are incredible! Thank you for sharing!
Thanks for watching!
Scoot all the way to the front of the seat and let your knees hug the handlebars when you take off.
it must be nice to have a nice garage like that alot of people dont
Good old fashioned hard work and anyone can have a garage like this .
I grew up with nothing for a garage all my life. I vowed that i was going to have one, and after years of working hard as a mechanic i finally have one. Wasn't easy but worth it, and 6 years later its still my favorite thing hahaha!
Need wheelie bars now🤣
Can you make a video of you putting a nitro to the Coleman and testing it out too?!🔥
Great videos
Wheelie bar just si u can get an accurate 0-30 😂
That’s the truth !! Lol 😂
Ive built a little custom mini chopper with about the exact engine and gears and even with the cheap stock comet30 and some white springs that thing is a wheeling rocket ship🤣! Puts a smile on my 45 yr old a$$ everytime i taker out for a rip hahah! But it destroys the drivers quick so i ordered a juggernaut finally. Hope its and improvement as reviews are skewed!?!?
Now to use taller gear for the final drive !!! Explosive acceleration and top end speed !
I have a video coming 👍🏼
@@Black66 any update on that video? I’ve been watching your channel religiously and have been wanting to see what a cvt will do with taller gearing. I’m worried it’s going to slip like crazy on takeoff. I have just ordered a 38t rear sprocket for my CT200U-EX with a 30 series cvt so I guess I’m going to find out one way or the other. Thank you so much for all the great content. 🙏
@@kickboxs77 Thanks! Ya, I have a video on that coming out in a week or so
Cool video, I am just setting up my first torque convetor with a rev cut launch control and electronic ignition kit for the 212cc predator
Sweet!
i felt like u ran out of road lol that top speed looks like it was still climbing
where did you get the riser mount thanks great video found the link again awesome video flat head briggs for life!!!
I love the Flathead Briggs! We used to modify them with Horstman parts back in the 80's
@@Black66 still do and also using my own modified parts
So I’m guessing you like the juggernaut..😂 I think you should straighten the front forks a little too.
Only for a minute . And then I will figure out some other combo to try lol
@@Black66 this is what I like about your videos. You are constantly on the hunt for more performance and you test everything as soon as you do it and show the results. The mini bike performance parts industry should be all over you with sponsorships.
@@RedfishInc Thanks ! It’s fun trying to figure out what combos work .
And the cool part is if it doesn’t work that good we can always change it.
Awesome 👏
Told you so
Yucky torque converter. Do not want. Thumbs up as always for your tireless efforts
You know me , it will only be on there for about five minutes lol I actually bought it for another project I’m doing . I’m going to put a clutch back on it.
It was for testing purposes only lol . I have another video I want to do with it and then I’ll put the clutch back on .
You will be able to get a little more speed by getting rid of the knobby tires and putting on slick tires
I beat people with slicks all the time and I got a bigger bike
@@dinocitybikelife Because you have a bigger bike. Again if you put on slicks you will get more speed
Is a mounting plate essential for the engine with this build? Will I be OK if I place my engine in holes,I drilled in the mounting plate without a mounting plate?
HAY MAN LOVE YOUR VIDEOS, I JUST GOT A RAPTOR MINI BIKE ON AMAZON I REALLY LIKE IT BUT THE DRUM BRAKE ON THE REAR ISNT NOTHIN TO RIGHT HOME ABOUT CAN I CONVERT IT TO HYDROLIC DISC? MAYBE IDEA FOR A NEW VIDEO.........THANKS FOR YOUR TIME MAKIN THESE VIDEOS
THanks!! I have a video coming out that will apply to that bike as well as the Coleman.
hey bud its me again im just wondering when are we gonna see the drone footage of you rippin u should have 2 camera angles would be dOpe by the way that thing is a Sicko BeasT
There is some drone footage on this beast video,check it out czcams.com/video/pVMs6lshHKY/video.html
Man you should totally do a stage 2 79 brother! I just swap 1 sprocket at and a chain for each change I want and it's an absolute riot!
Could you or do you have a video on her ratios and what different sizes run like? I’m new to small engine world an want to wrap my head around gear ratios
Do you have the stock flywheel on it? If so glad someone else read into the tillotson and saw he flywheel is rated for 10k rpm. No need to lose charging system and spend money xtra cash on a billet flywheel for it. Awesome doodlebug man
Yes, I added an advanced flywheel key to the stock flywheel to get some timing advance like the billet wheels have
@@Black66 okay Thank you
@@Black66 Because I’ve been asked my mama can I get one
@@Black66 and she said she got a pay bills
Not continuous, just for 10 seconds @ 10k
What gas tank u running mine won't clear the frame with the riser plate
Tilly tank in this video. Check out the Doodlebug playlist for many engines and combos on this bike. czcams.com/video/x61JKb-A_84/video.html
So I am new to the mini bike scene and I'm trying to find the best setup for my bike as far as Street use, I know torque converters are extremely popular however I see most people who do drag racing go straight chain no jackshaft or Torque converter.
So my question is what are the benefits of straight-chain as well as the disadvantages?
I think the advantages of a straight chain are less moving parts and Easier to manage at take off . The power doesn’t come on all at once like with a torque converter . So you can have a heavily built engine and still be able to manage it taking off. Myself I like the Chain set up better for a minibike . Check out my Coleman bike videos . I put a 212 on a cc100x . That bike is fun and pretty fast with a simple clutch set up .
See I like torque converters because id rather ride in the woods and i think the torque converter is a better application for that stuff because u get more power on the lower end….Everyone is different and I think it really depends on WHERE you’re planning to ride it…If i did alot of street riding, id absolutely have a clutch setup though..
@@ziggybammurphy1645 I totally agree with you. The torque converter is perfect for riding in the woods and trail riding.
How about a 40 tooth see if you can break 70
Have a different sprocket coming!
@@Black66 your light enough guy you could hit the 80 club I don't know if you want to on a db30 bit you only live once
I have a 157qmj ice bear q6 trike 2020. N I want to make it go as fast as that mini bike. I need good torque at stop n go plus top speed az well any help on what kits I need to buy to make it go fast from a stop n go plus get top speed?
Not sure what engine you running but a torque converter is good for exactly that. It will have really good low end and decent top speed. Check out this video. I put a torque converter on a mobility chair. czcams.com/video/dINewgKuzkg/video.html
@@Black66 it's a 157qmj engine. Cvt trans which runs with belt and chain. It's a icebear 2020 q6 trike. I'm new to all this moped life. Which this is my first scooter/moped I've ever own. I've seen alot of videos which people talk ABOUT big boreds and torque changing. But like Ive said I'm new to this. I've recently sub to your channel as I've notice that you are different from others. Seems like you sure know your stuff when it comes to this bikes. I've recently seen some where you change the torque tooths to more tooths n get a faster response from a stop n go point of view. I've also seen the video where you put the juggernaut I belive was called n damn the mini bike flew lol. That's exactly what I want my bike to do from a stop n go. I still need to upgrade few more simple things like the carbs. It's factory and comes plug from the air fuel ratio screw. Which don't allow me to adjust it. Do you provide parts I need to upgrade my icebear?
@@user-nw7mr8ib3d Thanks for the sub. No, I don't do any parts or anything. I actually do this stuff more for fun. It's fun testing different combos. I learn a lot along the way. My dad had a kart shop back in the '80s and I never really got rid of the bug. lol
Ya, you can make your bike fast and quicker
with that torque converter.
@@Black66 where can I find those torque's?
@@user-nw7mr8ib3d I put the link down in the description.
Yoooooooo Black66!!!! Hey I'm on my first build Doodlebug and I just scored a Predator from harbor freight. Do you have a link for that lift mount? I could use that as a template to drill my holes for the plate. If not no sweat. Awesome content bro anyways. Peace!
Thanks. Here is the link to the mount www.ebay.com/itm/153979950963?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
@@Black66 What a legend. Thanks bud!!!
@@bigmacmillerlite8775 That's right! A legend in my own mind LOL
Hey. I was wondering the size of that extended bolt because i might need to get one also.
What's the benefit of the riser plate?
The riser plate holds the driven side of the torque converter high enough to clear the frame rail.
im trying to hit high speed on a jug same frame i have a 12 tooth on the tourque converter and a 57 on the rear would that go fast?
No problem running a modded engine on a #35 chain?
No problems. Most of the time I use RLV GOLD on GOLD 35 chain.
u gotta change the name from DoOdLeBug toO BAja BEasT!!!!!!!!!!!!
Yes! Good idea . It is a beast!
Take a drink everytime he says beast, I did on another video and I woke up on the floor several hours later... 😏
@@RedfishInc That thing is a beast beast beast lol 😂
Hi is the key necessary?
what is that tool you used to pull your clutch off?
would really appreciate the help thanks
Its a universal puller. They have inexpensive ones at places like Harbor freight .
On a non hemi predator 212 engine can I use the 265 stage 2 cam and 22lb valve springs and still keep stock billit rod and piston?
The stock piston is fine and will work good with the 265 cam . But the stock rod I would replace with a billet rod .
Because that cam is capable of over 7000 RPM . The stock rod would be the weak link
@@Black66 you have a link of billit rod for predator 212 non hemi?
@@l.a.m7645 You can use the stock length rod or maybe even a .020 rod depending on how far down the piston is in the hole. That's if you want to bump compression a little. Here is the link www.arcracing.com/6254-arc-billet-rod-hf-predator-212cc-std-3-308-x-1-191-x-709/
im wondering if this Juggernaut will work on my 80cc is it a 5/8
No, but you can get an adapter to make it fit a 5/8 shaft for a few bucks on Amazon
@@Black66 thank u bro
Hey man, my bike has a 10t clutch sprocket and a 32 rear. Would the gear ratio change a whole lot with the TC? I still want to be able to cruise around 40mph
you would 100% be able to cruise at 40
hi i have a 212 in a pretty light mini bike with a 12 tooth clutch i was wondering if i should get the 3d motorsports manual clutch i anted to know if the accelaration is better or top speed is better
I had a 3D clutch on the kart. It was fun for burnouts and stuff like that but I'm not sure if the acceleration is better or top speed. I would have to test it to see.
@@Black66 if you have a stock 212 can you give it alot of gas and then will it do a wheelie
@@adambolko2448 yes, it will do a wheelie with a stock engine if it has a torque converter.
@@Black66 I’m talking about the the manual clutch
@@JackJohnson-mx3ny I have one for the kart. Here is a video czcams.com/video/O-CdW48qIoo/video.html
What is the correct valve lash specs for a stock predator 212
.003 is good
What kind a flywheel were you running?
In this video the stock flywheel.
Where did you get the plate for your doodle bug so you can run a torq-a-verter
Most of the parts used are linked in the description of the videos.
@@Black66 I looked only link is for the torque converter
@@mastermatt289 The link is in the description of this video czcams.com/video/YPpR91lpkVA/video.html
@@Black66 Thanks!
What app do you use
digHUD and a Dragy device for 0 to 30
Can I have that Please
I gain about 5-6mph running laps on a big bike w/ juggernaut. Sick plate bro!! OMBWAREHOUSE.COM for the WIN!!
Where did you get the gas tank ? I need one
That gas tank is off of the Coleman cT200 mini bike engine.
Where did you buy a Mod 3 cam?
I bought it from a shop back east . I would have to get you the link when I get home . I’m not sure if I put the link in the description.
@@Black66 Thanks, I would like to see the cam specs.
www.ebay.com/itm/133248355322?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Put a torque converter on your 200u ex!!!
I will , Video coming . I have more videos coming out with that bike
Can I have that please
Yes! Lol
@@Black66 I can for real