6 Colors, 1 Epoxy River Table
Vložit
- čas přidán 16. 06. 2024
- In this video, I showcase the creation of a one-of-a-kind rainbow river coffee table. The coffee table will be auctioned, and all the proceeds will be donated to The Trevor Project, a crisis support organization for youth. By combining artistry and a meaningful cause, this project aims to make a tangible difference in the lives of those in need.
Coffee Table Auction: CLOSED
The Trevor Project: www.thetrevorproject.org
Donate to The Trevor Project: give.thetrevorproject.org/giv...
New Merch Line: www.bonfire.com/store/double-...
Power Tools:
Laguna JX|8 Jointer: bit.ly/3rgGw0t
Laguna 18|BX Bandsaw: bit.ly/44viHjK
Laguna P|Flux Dust Collector: bit.ly/439RfqB
SuperMax 19-38 Drum Sander: amzn.to/3XGSj46
Epoxy and Pigments:
Tabletop Epoxy: www.superepoxysystems.com/ref...
Deep Pour Epoxy: www.superepoxysystems.com/ref...
Merlot: amzn.to/3D16A2l
Vivid Orange: amzn.to/44i573s
Tuscan Sunset: amzn.to/3D6Um88
Dark Ocean Green: amzn.to/44y5DtY
Deep Blue Sea: amzn.to/44TJvKX
Purple Haze: amzn.to/3O4G7al
Product Links:
Track Saw: amzn.to/3qCqYAB
Dewalt Track Clamps: amzn.to/3rfZG6x
Nylon Wheels: amzn.to/44FbaPD
GripRite Sheathing Tape: amzn.to/46IpE34
Silicone: amzn.to/3NQupiq
Dewalt Plunge Router: amzn.to/3pvUD1y
Amana Slab Flattening Bit: amzn.to/3RGeRhM
Featherboard: amzn.to/3O3ytfl
Colored Veneers: www.roarockit.com/skateboard-...
Vacuum Press Kit: www.roarockit.com/skateboard-...
Freud Flat Top Blade: amzn.to/43k1VTL
CA Glue and Activator: amzn.to/3PK8JXJ
Center Punch: amzn.to/46CJiNM
Forstener Bits: amzn.to/3U3G9Ad
Festool Domino: amzn.to/46xA31c
Double Sided Tape: amzn.to/3PPf9oy
1/8" Roundover Bit: amzn.to/3Dm1a3l
Festool ETS EC 150, 3mm Sander: amzn.to/3JLCcww
Counter Sink: amzn.to/3RJhGyA
Threaded Inserts: amzn.to/3pEUp8d
Connector Bolts: amzn.to/44AgfIR
Abranet Sandpaper: amzn.to/3DlWx9f
Abralon Polishing Discs: amzn.to/3QFR2p9
White Scotch Brite Pad: amzn.to/3LhCB9x
Grey Scotch Brite Pad: amzn.to/3Bew3UE
Rubio Monocoat: amzn.to/3O4GnpP
Polishing Kit: amzn.to/44n4Igs
To see progress between the builds
Instagram: / doublekay_products - Jak na to + styl
Thumbs up on Trevor Project!
a foundation that exists to save lives is an easy one to support.
An absolutely beautiful statement piece. Whoever ends up with this will be a very lucky.
Thank you! It was shipped off to Canada and hopefully enjoyed for many years!
Beautiful work! That table is incredible!
The table is absolutely fabulous. You did an amazing job. I also want to comment on your video about your process. Thank you for showing things not to do and that you made errors. Showing the errors helps others I believe and I think adds a unique over view to others. I learn from mistakes as well and appreciate you showing them in your clips. A lot of people do not do that and make it seem impossible when someone is trying to follow along. I give you Kudos for your video.
Thank you, Mary. I try to keep the process transparent. Although I'm always striving for perfection, its infrequently a perfect process. I hope my successes AND failures can be of value to not only myself, but others. Again, thank you and hope you stick around to see more!
I’m not surprised you’ve found success in woodworking! Whatever you put your mind to, success always follows!
Coming from you! Thanks for always being on my side, brother. Miss yah.
I admire your craftsmanship and skills!
Thank you, John!
Beautiful table foe a great cause. Nice video too. Keep it up.
Thank you! Will do!
This is really beautiful. You did a great job!💞
Thank you so much!!
Absolutely amazing table and amazing work. Hope it raises lots of money
Thank you, Jim, and thank you for viewing both of my videos.
What a beautiful table. You did an awesome job! I'm praying it brings a hefty sum at auction. The Trevor Project is a worthy cause.
Thank you! It could have brought more, the video is gaining some exposure quite a bit of time after the auction ended. I'll keep that in mind if I'm to ever do it again.
Very easy and very wonderful.
Beautiful. You're doing well. Thumbs up !
Thank you for the kind words and for watching.
Great project and a great cause. I throughly enjoyed it.
Thanks for watching the build!
Beautiful table! Picked up lots of new tricks, thanks.
Great to hear I could help!
Absolutely beautiful, and a great cause.
Appreciate the support.
Very nice!
Such a great video. You definitely have a gift. Thanks for sharing and all of the tips!!
Ahhh shoot, thanks, dude! Hopefully I can continue to grow and share
Outstanding!!
Well done..😎
Thank you very much!
Wow that rainbow strip looks amazing, seriously incredible work
Thank you! I had the vision to incorporate that from the get-go and I definitely was pleased with that part of the piece.
This is an amazing process to watch and an amazing cause you're supporting. ❤
thank you! I'm not sure I'll make a piece quite like this again, but it was nice to formally show the process and use the opportunity to do some good.
Beautiful work! Great build and a good learning experience!
Thank you very much!
Love what you achieves. Well done!
Thanks.
MAGNIFIQUE !!!
The colors are amazing. Thank you for sharing your experiences both good and bad, this is very honest on your part.
Translation of French by Reverso.
Absolutely STUNNING!
Thank you so much!
Amazing build and excellent, clearly explained video.
Thank you - I think the next one I'd like to take more of a "this is how I made it" rather than "this is how to make it". Less instructional, more story-like.
Gorgeous table! Wish I could have bought it ❤🌈
Thank you! I do take commissions on one-offs like this, but right now I'm a bit packed for a few months.
Great work, looking forward to more videos
Hoping to do every 2-3 months, if my schedule allows it! Maybe one day I’ll be able to do every 4-6 weeks
Really great and thorough video. Great work man keep it up!
Absolutely beautiful!!!! I would love to see more of these in public gathering areas to spread the word of The Trevor Project!
If people will buy them, I will definitely make them.
Such an amazing table and a well explained process!!!! I love it!!! Great video Zakk!!! 🤙🏽
Eddddd! Appreciate you watching!
Double Kay…why?…great builds, great videos, and an even greater cause. NOICE!🤙🏼
👁🌈👁
You absolutely nailed every aspect of this build! Your work always inspires me to strive to be better. Amazing work. Amazing video. Amazing cause. Just... amazing. 👏
Thanks, Adam. Slowly getting the hang of it all. I think the next project / vid will really show it all come together ! Appreciate your support, always.
Absolutely stellar build and edit! Being a third generation logger, Sawyer, and woodworker I deeply appreciate Zakk’s no frills, no ego, all work and emotion that goes into every project. You always take the time and attention to a new process to quickly (but thoroughly) master and improve upon its. Zakk you are making the woodworking video not just for those who enjoy watching, but one more other woodworkers. You are what CZcams viewers and more need to watch to really see and feel the trade, not the gassed up or diluted stuff that’s shoved into everyone’s feeds on here, IG and Tik Tok. Keep being amazing brother!
Derek, man, you’re the best. I really really appreciate those words. Hopefully one day this channel becomes something - I know I’m gonna busy my butt to try to “make it”
Amazing video and an even more amazing table! The rainbow veneer and epoxy combination looks EPIC!!
Thank you for helping through the process and contributing to such a unique piece.
Great work on the table and the video. Between the two it’s an insane amount of work!
It sure is, my guess is in the neighborhood of 150 hours. Hopefully I slowly get more efficient
wow. this looks amazing. wish i could i could afford something like this. what a joy to walk into a room everyday and see this. i would spend so much time looking at every detail.
The greatest of all compliments is someone wanting a piece and seeing something like this appreciated in person. Thanks for watching .
Awesome!! Great Craftsmanship..
Thank you! A simple design, but some intricate work and processes.
You killed it again Zakk. I think this has to be my favorite piece from you to date. Good job not getting discouraged with the mistakes made and for also showing them too! Amazing piece!
Mistakes happen! Finding the solution is the fun part. Honestly, the mistake brought me to a better aesthetic overall.
Absolutely unreal Zakk, can’t wait to see the next project you have in store
Budddddyyyyyy! It’s wild. I’m actually not even sure how I’m gonna pull off half of it
Quality video! Wouldn't change a thing, lovely work
Nice product. Thinking of getting into woodworking/epoxy work myself. Thanks for the inspiration.
Awesome! Glad I could inspire in some capacity. Expensive hobby / business, but man is it rewarding creating functional art.
So beautifull.
Thank you! Cheers!
I like the potential of this channel, so I subscribed ❤
I'm optimistic, the biggest thing for me is having the time to create and record projects of this magnitude. I've got very high hopes.
Beautiful job
Thank you!
Stellar execution, my guy!! 👊🏼
Thanks, buddy.
You really earned my subscription. I so appreciate that you included & explained all the things that went wrong and how you fixed them. It's a truly beautiful piece of furniture & art! And for the record, I thought your camera work was pretty good, considering you were using a camera you weren't familiar with. Thanks for taking the time to make and share this.
wow - another absolute banger. Excellent work man.
Thanks, man! Appreciate your endless support.
I'd watch a tour of your workspace video. You have some nice tools
Thanks for the idea. I've added some machines since this video (5HP 20" planer) and things are getting a bit tight. I live at a friends, so I'm confined to a bit of a "smaller" space (20'x24') - I'm hoping to get my own place and bigger space eventually.. if so I'll def do a "shop tour" for those interested.
This was a great video man. Loved all the detail and the camera quality was amazing. Very informative kept me to the end. Beautiful table man and noble to make for the foundation. 👏🏼
Hopefully I can make a little splash for a big cause. Appreciate you watching !
Great job man! Your attention to detail on this one really shows - it's hard to truly explain how much work goes into a project like this. The table looks fantastic - thanks for sharing this one!
It sure is. Until someone sees the amount of steps and little details it takes to do something as “simple” as a 3x1 inaly logo tag, it’s hard to understand and appreciate it. Thanks for matching, man. Here’s to success for both of us!
Beautiful piece of work. Gained a subscription thereby.
Awesome! Thank you!
LET'S GOOO! Again I am blown away by the time and effort you put into this video. Great editing and amazing finished product, nice work!
I’m really hopeful this can become the norm for me. I want to try to drop a video every 8-10 weeks IF possible.
Spectacular
thanks!
Man this is so good!
Trying to get better with every build
Excellent video and build Zack!!! The video kept me engaged throughout the whole process, outstanding job!!! FYI, stop being so hard on yourself you nailed it bud!!!
Thank you! Perfectionism will have yah always wanting better. Thank you for the kinds words! Next one will be even better, I promise
Damn great job bro!!
it is awesome
Thank you!
Amazing Zakk!
Thank you, Inlay King!
your filming skills are pretty much on par with your woodworking skills ;) both are great, you found a new sub - which you deserve a hundred times more of what you currently have! especially love the legs!
Well, damn! Thank you for that. Maybe if I can start posting more than once a year I can get that 100x ;)
@@thedoublekayway that sure helps ;)
Obviously a fantastic build and video! Not only was it enjoyable but it held my 3yo son's attention the whole time! Haha thanks for the awesome content, and break from parenting! 10/10
Can I put “babysitter” on my résumé now ?? Thanks, Ben!
Great video! The information you pack in here is great. Keep up the good work and eventually your views will match the quality of your content!
fingers crossed, my friend. Thank you for the kind words.
This is incredible, Zakk! Holy crap, that's a glorious, well thought out build! Obviously not without it's moments, but you were able to overcome them, and finish up with a phenomenal table! Also, great editing and narration, enjoyed the bid start to finish!
Wouldn’t be a fun ride if not a little bumpy, huh? Thanks for watching!
Awesome video!
Thanks, man!
hope it brought in a bunch of much needed funds. the trevor project and the trans lifeline have saved my life. it is nice to see the mix of this in my woodworking feed. i hope you post more videos ;)
the table looks great. those legs... both the shape and the veneer rainbow... love. it. i haven't used colored veneers like that before. reminds me of the colored mdf i see people in the uk use a lot. i will def have to check them out.
i would love to see a video of yours with the rainbow board that looks less swirling and more like ink bleeding into each other... i saw it on your instagram. might be crayon and not ink? this is great too. i just have done epoxy like this (albeit in one color and not multiple) and not like the other so i am curious to see it being done. i also love it with the burl wood...
all so beautiful. and again, those legs ;)
thanks for sharing! look forward to more from you, i subscribed.
thanks for doing the fundraiser.
and it is happy pride somewhere!
The trevor project is an amazing charity, i am glad you are helping them.
Thanks for being awesome.
you get a sub from me for sure!! excited for what will come!
I appreciate the kind words and you watching / supporting.
@@thedoublekayway its easy to sub and watch videos that are well made by good people.
Dude, I saw this table when you debuted it on Instagram and I was blown away. I only just now went back and watched the CZcams video and saw everything that went into this table.
Top quality work, Zakk. 🔥
thank you! A lot of time and effort into it, so I'm glad to hear you enjoyed the process.
June 2023 - Nice
This is my first time watching your videos and I’m enjoying them very much. You will continue to learn and grow as the years pass and you’ll become a better and more proficient artist in your work and design. I Look 👀 forward to seeing more work and progress in your videos and work. Just a thought 💭 “ I’m 84 yrs old.
I sure hope so. Design is certainly where I lack proficiency. I'm working every day to improve on that and the fine details of woodworking. I appreciate the kind words and I hope you're here for many many more years to see where this goes :)
I LOVE this! The table is beautiful, the legs with the rainbow detailing are amazing too - here before your channel blows up
I dont know your YT aspriations but youve bought the camera now (great btw) if you get a video out once/twice a month and do a little overview of the finished work for a youtube short that links back to the related build video your channel will sky rocket, you've got a nice voice to listen to, your great at wood working, camera work and editing youve just got to get the content out consistently ❤
I appreciate the kind word! Especially about the skills part.
Fingers crossed the channel does take off eventually, but you're spot on, the consistency will be the big thing. Trying to balance personal life, professional life (9-5), and other things, it gets to be a lot to dedicate the time needed for a project and video of this magnitude. I'd love to be able to publish a video every 6 weeks or so, but my life just doesn't allow it...YET. Hoping that 2024 allows me to publish every 8-10 weeks at a minimum. I have a laundry list of great video ideas, just the dedicated time is tough to come by. Standby, I'm trying :)
Beautiful work. I wish I had the money to bid on it.
No worries at all! Like I mentioned, watching the video is good enough for me! It’ll find a good home and hopefully in the process we can raise a good deal of $
Fantastic video! It is so well shot and informative! Honestly, you made it look so easy from start to finish. I know the first rainbow lamination attempt wasn’t what you planned but I thought the wavy lines in there looked like you were on to something interesting. Do you think you could still use it in a future project? This table turned out absolutely fantastic. As I watched the last clips of the final table results I could not help but shake my head in disbelief of how beautiful this table turned out! Man you did great! Too bad this is the first video of yours I’ve seen because I would have LOVED to try to win this at auction for both the looks and the cause it was intended to serve. Bravo 👏🏽 ❤
Thank you so much for the kind words! The video didn't gain much traction until long after the auction had closed, unfortunately. I think in the future I may have to do a "for sale" on my website sort of listing when I have a project of this magnitude. I look forward to hearing what you think of future projects.
to make your temp molds better for release seal wood and apply paste wax with several coats.
Epic build my friend! So much great information along the way too. I also learned that I don’t want to make my own veneers 😂 jk. Looking forward to the next video!
That veneer kicked my butt, but the process is fun and having the ability to create unique aesthetics! I def recommend a vac bag
TRABALHO ESPETACULAR, MUITO BOM GOSTO NA ESCOLHA DO MATERIAL , .AS MADEIRAS, AS CORES DO ARCO-ÍRIS ESTÃO EM DEGRADADO, PARECE MUITO BONITO.. UMA OBRA DE ARTE. PARABÉNS! DO RIO DE JANEIRO, BRASIL
Thank you
Really impressive build and production quality for the video! Spreading Rubio with the popsicle stick thingy is an underrated tip too… no more saving old credit cards for me 😂
Mannnn, whatever gets the job done right?
I was wondering how you got the swirls in it. Previous rainbow/coloured projects I have seen had used melted crayons to get the colours.
I can't believe how far our initial rainbow project has taken you! This table is AMAZING and the cause is noble. I really hope the auction brings all the recognition both you and The Tevor Project deserve!
Thank you for asking for that serving board a couple years ago. Incredible how it keeps evolving. Let’s just say I know this isn’t the end of it, either.
So cool to watch it all come together. So proud of you 🌈
Thank you for always supporting and hearing me ramble about wood… all day
Do you have access to like local walnut you can slab out personally from tree removal or buy separate. Just curious cuz the few videos I've just started watching I see you kinda just pull them from like storage corners. So I was just curious cuz I buy when I can but I live where walnut is super rare like 1-15,000 trees in at the absolute highest estimates. Run into the same exact problem with red cedar
I've never showed it in any of my videos (I have showed it on IG), but I have about 6000 BF of wood that I've bought over the years. I frequently pull from this stash for projects, but for something like this project where I was looking for a specialized material, I order it from out of state and have it sitting in the shop until the project starts. Long story short, I frequently buy wood in and out of state from suppliers - I do not harvest and mill myself.
Dude! Gorgeous piece! Re: your use of a new camera…..if that’s your first attempt your ceiling on video production skills will be as high as you want! Great work. Your narration and description content is brilliant. To me it was very detailed and precise. I like that style of content. I hope your Table generated a lot of money for that worthwhile cause.
That is a gorgeous piece! Great work. Did you use SketchUp or any software to create the design/dimensions of the legs?
I did, yes. I used SketchUp to determine dimensions and splay. I didn't show that part as I figured it wouldn't be that desirable of content for this build, but I will definitely be showing it used in future projects. I often use it to rough mock up projects. Really helps determine what dimensions "feel" balanced.
This is unbelievable beautiful …. In the beginning I thought I could try that (the epoxy part) but at the end …. No never 😂😂😂 thats way too much sanding and polishing …. You did a great job on the piece and the video 🤘🤘🤘🤘🤘
I'm sure you could do it too! It's meticulous, but it's nothing too crazy.
My philosophy is “If you don’t leave a little DNA in each project you didn’t give it your all”
😍😍
Thanks for watching!
When’s the next one? Looking forward to your next project
I took a little hiatus from projects, now I'm finishing up a dining table commission, then I'm back on the YT horse. I'd say expect a video early spring, and then hopefully videos at a more frequent rate after that. If you've ever seen the "chaos" concept with cutting boards, imagine that, but MUCH bigger and cooler. The project will be 1 of 1.
How much has it cost for all your tools and machines? Curious cause i want to get into this..
What I have in value today definitely isn't what it takes to do the work, or do it well. I started off with a cheap black and decker drill and a used 1990's miter saw. I slowly built up my tool inventory. I've put back almost every dollar from projects into tools and supplies. If still curious though, I've got about ~$35-40k USD in tools / accessories.
oh dam
Aluminum dams? Lolllll
No matter who you made it for, it's beautiful.
I appreciate that message. Thank you for the positivity.
on your bases. No reason you can't sand (and finish for that matter) prior to final assembly. A little fiddly to be sure, but better than hours of hand sanding.
Although partly true, very inconvenient for this operation. With the glue up any misalignment or slip in the joint and it will have to be resanded. Not to mention the potential for sanding the area where the joints meet and compromising the fit...or having to round over the pieces after glue up. I appreciate the advice, but if I were to do it again, I'd still do it the way I did. Order of operations was HIGHLY considered when making these bases.
@@thedoublekayway funny this endeavor. I see it the other way. lol. More chance for inconsistency with varied access to the surfaces. of course we are both correct in our respective shops. Great piece btw.
@@StoneyMeyerhoeffer 100%! I definitely appreciate the recommendation. I like seeing and hearing how others approach situations and tackle problems. I tell people all the time, the “right” way to do something, is the way that works to achieve the result desired (as long as it’s done safely).
Curious if you can’t see the bottom pour why bother coloring it.
You can see it from the side (at the red and purple) and I don’t half-ass anything I make. Just lazy and irresponsible to not do a simple procedure to ensure a quality end product…
How much did it sell for?
$1500
@thedoublekayway Congratulations. That's a helluva piece you made. You ought to be proud of it.
I really like the result, but maybe do not release all those epoxy shavings into your environment next time?
Why divisive?
0:46 - 1:00
Looks very good
I was very pleased with it!
It is nice, but I think it would look better without epoxy river