The red bars look dope. I like the clean MX style of your bike. (No goon guards and crap) And you don’t get the full depth of how cheesy the stock bars are until you take them off. (Then toss them over your shoulder) I can’t wait to do it to the exhaust.
Good video but it would have helped some of us to see how you determined where to drill the hole and how you went about measuring it. Otherwise thank you for the install video
Hi and thanks for the video. Can you. Let me know the exact model of the bar riser ? Is it also a converter as i believe the diameter is different from original bar to pro taper ? Please do not just link web site but actual model part number and description thanks so muck
Hello Piero, yes it is also a converter from 22mm to 28mm and also rises the handlebar a little bit. The link is sw-motech.com/en/bike/HONDA/CRF300L/2021/products/ergonomics/handlebar/bar+converter/4052572009901.htm In the description you can find the part number as well 👍
Hello ! i just bough a 300L and i want to make the same modification as you. Can you share the parts number you used please? Thanks a lot and have a great day
Hi, do you think this bend (countour cr high) will work for 1.71cm rider? What spring did you use in the rear shock? Any changes to the front fork. Sorry for too many questions, I'm new to all this. Looking good now.
hi, what did you use to put grips on? is it a soap, or any other liquid? or glue? The folding mirror is it good (saw on amazon and thinking to change the standard once)?
Hello Artur , I used soap to put the grips on but after I had to use glue also to fix them. The mirrors are very good 👍 I drop the bike so many times and they are holding on .
@@endurocorneradventures6237 How did you make sure you had the holes in the right spot before drilling? That’s where I’m stuck with mine and haven’t installed it yet.
Hello mate, I took down the controls, I used a white marker to color the spot than I put it on the new handlebar. Approximately you will see where is the white mark and you drill the hole 🕳. 👍
Salutare, am schimbat pentru o poziție mai buna, am 180cm și ghidonul era incomod în mers pe off road. După ce am schimbat parca sa transformat motocicleta. Părerea mea este ca merita upgrade-ul. 👍
Salut. Am cumparat si eu setup-ul acesta si am observat ca ghidonul nu se potriveste chiar perfect in convertori. Ai avut vreo problema pana acum, sau a ramas totul fix? Multumesc.
@@endurocorneradventures6237 super. Multumesc pt raspuns. Mai am doua saptamani pana ajunge crf-ul si voi putea testa si eu ghidonul 🙂 dar as prefera sa il testez fara cazatura 😁 spor!
Hello mate, I am 1.8m tall and the bike was a bit too low for me. With the higher setup I can ride better on & off road. And the second thing is the original handlebar is made of steel, you can band it werry easily 👍
@@endurocorneradventures6237 The last time I put on grips they were very tight but I remember tapping it from the back like a ketchup bottle seemed to work.
The red bars look dope.
I like the clean MX style of your bike. (No goon guards and crap)
And you don’t get the full depth of how cheesy the stock bars are until you take them off. (Then toss them over your shoulder)
I can’t wait to do it to the exhaust.
Great job! Pup wants to be outside helping 😅
Yes , always 👍 job supervisor 🐕
Good video but it would have helped some of us to see how you determined where to drill the hole and how you went about measuring it. Otherwise thank you for the install video
Nice work mate, looks ace! Hopefully fits you better now! :D
Thank you 👍, it is a whole new bike with this setup.
the name of the riser? and the size? thanks so much
Great video! How much taller would you say the new whole setup gains, compared to where the stock bars were?
Hello Mike , today I measured the risers the handlebar now is 3cm taller + the high bend maybe 1cm . Total gain approx 4cm. 👍
Look great! Any issues with break lines and such? Anything end up being to tight of a fit as far as cables
Hello mate, no issues. Everything is working fine 👍
Hi and thanks for the video. Can you. Let me know the exact model of the bar riser ? Is it also a converter as i believe the diameter is different from original bar to pro taper ? Please do not just link web site but actual model part number and description thanks so muck
Hello Piero, yes it is also a converter from 22mm to 28mm and also rises the handlebar a little bit. The link is sw-motech.com/en/bike/HONDA/CRF300L/2021/products/ergonomics/handlebar/bar+converter/4052572009901.htm
In the description you can find the part number as well 👍
have you ever had any issues with the riser bolts or clamps holding the bars coming loose or has it been all good?
Hello Sammy, I didn't had any issues with the bar risers or the bolt, so far so good. 👍
Hello ! i just bough a 300L and i want to make the same modification as you. Can you share the parts number you used please? Thanks a lot and have a great day
Hi, do you think this bend (countour cr high) will work for 1.71cm rider? What spring did you use in the rear shock? Any changes to the front fork. Sorry for too many questions, I'm new to all this. Looking good now.
Hello mate , the CR high bend is perfect and I am 180cm rider. I made no changes to the front fork, the rear one is from K-tech. Success 👍
Did you have any issues with any of the cables (clutch, brake or any electrical wires) being to tight with the cr high bend?
Hello 👋, no problem at all. It works fine.
Hi! Can you please provide links for the products? Nice video thanks
Hello Mário, I have bought the products from www.24mx.com/ and sw-motech.us .
Hey could you list part Numbers ,, and links please want same setup for mine ,,
Hello my friend, I have bought the products from www.24mx.com/ and sw-motech.us
hi, what did you use to put grips on? is it a soap, or any other liquid? or glue? The folding mirror is it good (saw on amazon and thinking to change the standard once)?
Hello Artur , I used soap to put the grips on but after I had to use glue also to fix them. The mirrors are very good 👍 I drop the bike so many times and they are holding on .
@@endurocorneradventures6237 any special glue?
I used this www.24mx.eu/product/protaper-grip-glue_pid-022882?gclid=EAIaIQobChMIu6Tkqt2n-QIVUIxoCR3g5gPhEAQYASABEgKBCPD_BwE&gclsrc=aw.ds
so did you drill holes for the controls or did you cut the little tab that goes into the holes?
Yes I drill holes on the handlebar to fit the controls properly 👍
@@endurocorneradventures6237 How did you make sure you had the holes in the right spot before drilling? That’s where I’m stuck with mine and haven’t installed it yet.
Hello mate, I took down the controls, I used a white marker to color the spot than I put it on the new handlebar. Approximately you will see where is the white mark and you drill the hole 🕳. 👍
How tall are you? I'm 6'2". Just looking into a 300l. Dish soap works good for putting on grips.
Thank you mate. I am 1.80 cm tall, after i changed the spring in the rear shock the bike is perfect for me.👍🏼
What was the handlebar model? average? Henry / Reed ? or some other model If so which one?
The bar is stamped with CR High
Salut ! Simți o diferență la poziție sau e mai mult o schimbare de aspect?
Salutare, am schimbat pentru o poziție mai buna, am 180cm și ghidonul era incomod în mers pe off road. După ce am schimbat parca sa transformat motocicleta. Părerea mea este ca merita upgrade-ul. 👍
Salut. Am cumparat si eu setup-ul acesta si am observat ca ghidonul nu se potriveste chiar perfect in convertori. Ai avut vreo problema pana acum, sau a ramas totul fix? Multumesc.
Salutare, eu nu am avut nici o problema cu prinderea se potrivește ok . Chiar am avut și câteva căzături pe teren .
@@endurocorneradventures6237 super. Multumesc pt raspuns. Mai am doua saptamani pana ajunge crf-ul si voi putea testa si eu ghidonul 🙂 dar as prefera sa il testez fara cazatura 😁 spor!
Whats the point of taller bars?
Hello mate, I am 1.8m tall and the bike was a bit too low for me. With the higher setup I can ride better on & off road. And the second thing is the original handlebar is made of steel, you can band it werry easily 👍
What bend did you choose?
CR high bend
Salut ! De unde ai cumparat oglinzile ? Poti lasa un link ?
Salutare , de pe AliExpress is chinezării dar țin bine, de doi ani nu am reușit sa le rup . 👌💪🏻
Mersi !!
I think ur riser clamps are on the wrong sides.
There’s a measurement between clamps they are I can tell but where your lines on your new bars are
Hello mate, i saw them installed in both ways. I don’t know how is the correct way. Probably you are right.
I just remember there is a measurement but urs looked the opposite according to lines on handle bars I’m no expert.
This is probably the least detailed video of a handlebar mod. I’ve seen, there are much better ones to watch.
Oooh shit.. I watched you install that throttle grip.. it's tricky huh.. 🤣🤣
Yes :)) maybe there is an easier way to install but finally it worked 👍
@@endurocorneradventures6237 The last time I put on grips they were very tight but I remember tapping it from the back like a ketchup bottle seemed to work.
Io le infilo soffiando con la pistola del compressore entrano subito per estrarle lo stesso 😅
Thumbs down for sure bro how you didn't say a f****** word about what you're doing the whole video sorry man fell asleep
Sorry mate, I'm sure you are good enough to find a better video 👍
@@endurocorneradventures6237 Hey man, great video. I actually liked it that way!
Thanks Rodrigo, this upgrade is a must for the CRF. The bike will change a lot 👍
@@endurocorneradventures6237 great video mate 👍
Thanks 👍