Autel Maxisys MS919 | How to Program a Left Head Lamp On A 2017 Mercedes Benz C CLASS
Vložit
- čas přidán 11. 03. 2021
- Hey Guys, This is Curtis your independent Autel Diagnostic Consultant
Today I am going to share with you a case study on “How to Program a Left Head Lamp On A 2017 Mercedes Benz C- CLASS”
By the time you finish this presentation you will learn:
The different tools and equipment required to safely program the vehicle
Common terms used when programming Mercedes Benz with the MS919
How to remove the headlamp safely
Step by step instructions on how to program the left headlamp with the MS919
What to do when the Autel servers are down
This is a real case study with one of my clients who programmed for the very first time.
Programming is here to stay and its only going to increase over time. So we have 2 choices..
We send to a dealer ( and lose potential profit and customer trust)
Learn how to do it yourself.
If you want to learn programming ( or need a diagnostic tool) go to www.auteltech.co.za
Ill be more than happy to training you!
Thanks!
Curtis Hardin
#MS919 #ProgramLeftHeadLamp #2017MercedesBenz
Thank you so much. I managed to program a nother headlight without the old light and without the old modules.
Hey Cirtus, awesome video. I have the ultra tried programming two different headlights with Mercedes and no luck. Called Autel US support they tried also still no luck. And they did a data log and no one has ever got to me. It’s a GREAT tool I use it everyday especially BMW programming and coding, it’s great. But with benz I just never had luck with ultra on programming. Thanks a lot for the great video :)
Hey Huseyin. I heard about that issue alot. Just book the diagnostic tool consolation and ill be able to open up the servers for you.
@@AutelConsultancy Same Job, Also tried with my Ultra and Elite, no luck. Friend at dealer was able to do with Xentry, what are we doing wrong?
@@joemullaney1239 HI Joey, Just book a diagnostic tool consultation and ill be able open the servers for you the next time you need to program. Your not doing anything wrong.. its Autels servers
Great video, very informative.
Glad you enjoyed it!
Curt , You the Man!!!!
Great video.. I'm not a mechanic however I can do most things on my own car and my friend's cars. I just had an issue with my Left Headlight control module as I used the MBII to see what was up. I lost my left lights except my DRL. I ordered a new module and to save cost, I installed it myself (which was easy). I didn't test the new module but my DRL remained working however my right side started to do some weird stuff. I was able to book a week later to Mercedes to program the module but when they tried they said they could not see the module and figured it has to do with a wiring related issue. I advise them that I had many code come up, (General Error) and as such many time the CAM disconnects the power and that they should cycle the modules. He didn't believe this. Anyways I requested to pick up the car and see what was wrong on my own without further cost. When I picked up my car I noticed my DRL were working on both sides, and there were no codes on my dash. I connected my MBII to guess what, the module showed up. My thought is when the code errors come up, CAM disables power however after they returned the car to me, the module woke up and handshaked. Now I figure the error will only happen once the car request lights on, as they drive it into the shop. How can I get it programmed without the lights turning on and produced the error that CAM will take over and cancel any handshake? Thanks
Hello mate your videos are great!!! And I have a Mercedes c class w204 recently my headlights stopped working and got a second hand fit it in and still not working! Daylight and indicator are working but not the mean-beam??? Does it need coding?? Please help
Great video, Curtis! How would we go about coding a heated steering wheel in a MB vehicle? Say everything was wired according to factory, and all that was needed would be coding for the SAM to able to recognize the installed heated wheel/module.
Not sure if you’ll see this, recently I put in static led headlights from the halogen pair. I’m repinning my wire harness to match the new headlights. Is this all o need to do to correct codes?
this are well all be so helpful thank you.
Hey! Good job!!! ;)
I have a Mercedes E Cabriolet (a207) with intelligent Bi-Xeons. I had the left headlight replaced due to a scratch on the lens. Now when I start the car the headlight go cross-eyed as part of the startup diagnostics.
Can I download the original Firmware for my car and apply it using the MS919, and apply to both headlights to get the original behaviour back? If I order the MS919 is there anything else I should order at the same time?
question can i buy that vcmi and use it on my old autel ms908p ? thanks
Hi, I programmed a left front head light from water intrusion. It also wiped out the control module due to corrosion. I have replaced both and programmed/coded both and also inputted the data matrix QR codes in each of the modules. However, after clearing all codes, I get low beam/high beam internal electrical fault codes and the left front head light will come on but will pulse 4 times and then cut out. Head light and module are from our local Mercedes dealership. I have tried the unthinkable amount of things with no solution. Only thing I can think of is either a programming/coding issue. Thoughts??
Vehicle is : 2017 Mercedes Sl450 with LED intelligent light system
Hi, is it also can program daylight/indicator module?
I've always loved watching your video, even I'm a locksmith but still good info.
Do you have any yearly support subscription?
Hi My friend I miss yours videos, please stay on Good videos all the time, 👋👍💪
Thank you, I will. I appreciate your support! When I reach 20K supporters im going to give a diagnostic tool out or an update card as a thank you. Thanks
Thanks😀
Thank you man
You're welcome! Enjoy your weekend
Yes sir thank you stay safe
if i just replace the Ballast can you tell me step by step what function should be perform
Good video and thanks only i dont have led code can i still configure?
😅wow this is where we are at ? This is why you gotta keep things simple. Programming a headlight. Damn.
Hi Curtis I have a damage to my 2 headlight on 2016 mercedes-benz S500 coupe. I have bought a complete used headlights from another car. Can I programme this to my car.
Thanks.
Which other Autel devices are able to do those programming tasks?
Just got a 909 would i need to update my vci j2534 to pro or anything to do these reprograms
Awesome
Can this be done with the Autel im608 PROII I tried programming and it says success but the light just doesn't light up
Want to ask a question about purchasing Airel MS919
Hi,I couldn't read led code data matrix for gle 167 2021 year ,maxidas read 2018 year,but 2021 doesn't ,what should I do?
please help, we can't find the "control module initial start up" program on the Autel Maxsys908 scanner
No I have the ms909. MB don’t let you program anymore. What else do you recommend
Hello
I have an autel Ms909 and I'm having issues getting the correct SCN code for a customers 2014 e350.
Ive contacted autel tech and they have sent me one scn code, which didn't work. It actually made my situation worse. Ive been in touch with tech support but is it a guessing game them in regards to the correct scn code? I see on yours it has a listing of 3 or 4 different scn codes.
Hello Curtis, thanks for your many videos. They are really good. Please was the Head Lamp a used or new?
I think it was a new one. Usually on Mercedes they dont accept used modules. You would need to virginise the modules first. Then flash program it with the autel
@@AutelConsultancy can the MS919 perform this virginise procedure? Thanks a lot.
Can a used PCM with same part # be installed successfully on a 2017 Mercedes GLA 250 using a MaxiSys Elite with a current update subscription?
As far as updating all the existing modules of BMWs and Mercedes Benz cars that show newer levels, to justify a programming fee , I would charge a customer, I can't think of any examples where an OE manufacturer would instruct you to update any module of a vehicle with an aftermarket Chinese J2534 with secondhand files downloaded from a server based in China
I doubt it. Usually with benz you need to virginze the module then you can program it with the elite.
Great vid. I own a small dealership, what Autel scanner would you recommend? We do a fair share of euro cars. Thanks in advance
I charge for diagnostic tool strategies. They take about an hour for me to run my frame work that will determine which tool is right for you based on the problems that I discovered in the consultation. You can book a consultation at my website auteltech.co.za.
Hi I have gle 167 2021 year ,I tried to read led code datamatrix but I couldn't any idea?
Hey man, I have a w205 in need of headlight programing due to new control unit. My issue is that my driver side headlight does not have a QR code. Is there a way to recover the QR code or to program it without the QR code
I dont know what year your car is but it might not be needed. Ive programed headlamps with the Elite which doesnt have any qr capture camera and I was still able to program it
Hello Sir,
The bar code on the right headlamp cannot be read. is there any other alternative way to program?
Hey buddy, thanks for great video all the time. Im looking to buy ms909, would it do the same job?
Yes the special functions are the same
Which other Autel devices can do these programmings?
Hey great video. I just last week went through changing a 16 c300 headlamps and modules. No programming was needed. Can you explain why? The headlamps were LED OEM but used. The ballast/modules were aftermarket new. Everything worked plug and play. Why did this happen here?
From what I understand they head lights might still operate but they will not be optimized to work properly. It also depends on the year make and model. Some older models may not require it. But the newer models do require it. What I would do is check to OEM repair information and see what they say because there is no way to know which vehicles require programming or no programming. It varies year by year.
You prolly dont care but does anyone know a tool to log back into an instagram account..?
I was dumb forgot the account password. I would love any tips you can give me
@Zakai Alfred instablaster =)
@Amir Mark thanks for your reply. I got to the site through google and Im trying it out atm.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Amir Mark It did the trick and I now got access to my account again. I am so happy:D
Thanks so much, you saved my account!
I have same problem in my Toyota CHR...can you help me please
What’s the price of a 919 right now? Thanks
What utel scaner is Tha Best for programing modules whish one You recoment to Buy
HI Chagon, I charge for recommendations. If your serious and want me to take the time to align you with the right tool , go to auteltech.co.za and click the diagnostic tool consultation
Grate video, but like you said don't program a module if not necessary , in first scan right head light shows no code and now after you did program it shows problem.
Hi Curtis can the Autel Maxisys Elite compete with Porsche Piwis111 tester for Porsche cars?
I would say No due to the fact that OEM tools will always supersede aftermarket tools. However the autel does have alot of features that will allow you to do day to day functions / coding on that particular vehicle. Im sure the price is cheaper than the OEM tool as well. So they both have their pros and cons.
Hi, I have a headlamp control module out in my 2010 E350. Water damaged according to the dealer. If I buy a new module from Amazon or eBay, would I need to get it programmed by the dealer or no?
Usually all new modules need to be flash programmed. ( I always check the OEM repair information to be sure ) If you dont have the equipment to program it or code it . Then you need to take it to a dealer
Eres la mera yuca de la sopa compa
Hello is this the similar process for a previous generation Benz cars?
I would say so. You might not need to do the qr code thing as they didnt have them on older vehicles but the process is still the same.
Hi can this programming be done with im608ll?
Thanks
I personally havent had any success using the IM608 for programming BMW. When I attempted this the option wasn't there. However there were some of my subscribers that said it was on their. The only way for me to know is if I get the VIN and ask my engineer. If its worth it you can book a consultation and I can check for you at auteltech.co.za
Hi boss !! Very nice vedio with benefits , but i have something to tell , i got Mercedes Benz G63 2015 Model , the front SAM control replaced new from Company , i tried to do SCN coding using Autel 908p but not success and then the file not download fully file from the server , i tried so many times but no way, i used Xentry with SCN
coding its success , so what the solution for it ? Most of cars SCN coding not working properly.
Regards
Hey Curtis, I'm DIY guy. Is there a cheaper model that can do healight programing?
I think there is , you can check for yourself otherwise if you want my professional opinion you can book a diagnostic tool consultation with me at auteltech.co.za
U very good friend 🌷👌
Thank you so much 😊
Curtis where can i find reviews about your sales. Like am sorry to say but i do not have any guarantee that i will get the products which i am paying for... I want the shipment to India.
Hi Qissa. I only give out this information when clients book a consultation with me. The reason I have the consultation is to also see if we both are a good fit for each other. What I suggest you do is continue watching my videos and see how I help my clients.
Hello, I've had the 919 for over 2 years and never had the opportunity to program anything? My question is would I be able to program with an expired subscription?
HI Charles.. you cant program for BMW or Benz with out a valid subscription. The other manufactures you can program with a laptop and your VCMI no problem. You just need to download the software from the OEM site and purchase their day subscription .
Hi like to buy a ms909cv how good it work
HI Richard, I don know if its right for your because I didnt diagnose you yet to see if it will meet your expectations. If you want me to verify if this tool is a good fit and see what benefits you will receive from me go to auteltech.co.za and book the diagnostic tool consultation.
Mate its the same to programing with autel MaxiSys MS908S i MaxiFlash
Can my MS908P do the same please ?
I dont think so. Im not sure if it has QR code capabilities.
👍
how do you check if the coding is available
My clients will send me the VIN number then ill check with my engineer to see if the programming is available. If its available then we can do the programming. If its not ill give my clients another solution to program the module.
Would the im608 do the same programming?
Hi Jorge, The Im608 doesnt have flash programming on the tablet. You would need the MS909 to do this function
@AutelConsultancy thank you, but While I was searching I did find someone doing it with im608. Here's the link it's a 2-part the short part 2 explains it very well why part one failed and part 1 shows the process that failed the first attempt. Something to consider for the future.
czcams.com/video/7pstONG_JWg/video.html
czcams.com/video/x5IVm1DMEPg/video.html
@@jorgemat8080 Hi Jorge, Ill take a deep look into as well as get my engineers input. Generally speaking the Im608 doesnt have flash programming for bmw and benz. They purposely left these features off and alocated them to the Ms909 , 919 and ultra. This is why you wont see the im608 being marketed for benz flash programming. If it was then there would be little use for the other models that I mentioned in terms of programming
@AutelConsultancy I just went through the menu on im608 and it has that option in it. I have a 2017 E series coming in this week for a headlight replacement and the im608 is going to be my first choice if it fails then I have other brand-name tools that can do it. Will update you on the results. Thanks. Forgot to mention, I do a lot of BMW headlight programming with IM608 and never had an issue BMW headlights takes about 10 minutes.
@@jorgemat8080 Hi Jorge, I received an email from my engineer and they told me they added BMW Programming and Coding and Benz SNC Coding DAS , ECU TCU ISM and ESL . This good news for im608 owners. The only thing that you might run into just because your vehicle is newer is that your VIN may not be covered. What I recommend my clients to do is ( maybe you can ask Autel New York) before you do the procedure, find out if its covered by sending them the VIN number. This way they can tell you before hand if it is covered or not and you wont be wasting time.
Is IM608 capable of doing this?
HI Flip. Nope. It doesnt have bmw or benz programming on it unfortunately
@@AutelConsultancy IM608 NOW DOES PROGRAMMING, I did BMW..
And is vcim better than j2534
Yes. Has new protocols for the new vehicles
i have an ms 906bt purchased from china,its locked ,how do i get in touch with you via email
I dont offer free support. You should just contact your seller and ask him to unblock it. Or send it back and ill sell you a model that works in your region. Thanks
I wish Autel would have consistent software and procedures amongst their myriad of scantools. I have an MS909, and of the five Mercedes headlamps I've tried to program, none of them programmed, and the process looks completely different on the 909 than it does here on your 919.
Furthermore, I have yet to see a shop use a new module. Insurance won't pay for it unless it's physically damaged, so they swap the still perfectly good old modules onto the new headlamp, which begs the question, why does it even need to be programmed and coded at all?
It's frustrating, because most of the shops I service are a $900 tow bill from the nearest Mercedes dealer, who then charges them $1200 to do what my Autel says it can do, but can't.
And because you asked, I charge $610 for Euro module programming. Or rather, I would, if the bloody thing would work. I've lost over $3,000 in revenue over the last six months on Mercedes alone, and inconvenienced two of my highest volume shops. :(
I think you need a consultant . The biggest problem that I have with Autel as a whole is that their ecosystems seems to be more focused on sales vs really helping their customer solve problems like these. My clients also get this same problem, the difference they have someone that can give understanding why the programming may have failed, and more importantly when it fails, to have an alternative solution that will solve the problem.
I don't know where you purchased your tool from but , they don't have a clue that your having this situation and I feel its their responsibility to sort this situation out since they sold you the tool.
Lastly I would encourage to change your mindset and instead of saying " I cant program these modules anymore" instead of saying " how can I program these modules" . When this problem happened I had to ask myself "how" and over time I found a solution. Yes your tool should be able to do this procedure but its not and you have to adjust.
Is ms909 a European model
it depends if you buy from a European seller. Then it is
autel hardly can program new Mercedes every time i tried to do headlight it doesn't work
Thats correct . Benz turned off access to their servers for newer vehicles. You will be safer with 2016 and older . I would recommend to get contact with your supplier to help you match the data from the autel servers as the first programming attempt will probably fail until the servers are open to match the data
@@AutelConsultancy that is a long process
Uhmm Curtis, you created a fault code in the R Headlamp that wasn't there on the pre scan. You now have to figure out what you did. Maybe you should have left right side alone?
I asked the engineer about this and they said to program both when the autel prompts you. But from my experience when you program both headlamps , then the programming corrupts the other headlamp. This is what caused the error code. I dont remember what we did on this situation to solve the problem but logically I would try to program the module individually and see if that clears the code . If that doesnt work Ill use another software to do the programming / coding of the module
Hey
$350.00
Why don’t you teach how to properly program a module using Autel?
Hey John, I do have a service called the j2534 training and consulting. You can book a training session by going to www.auteltech.co.za. Then I can walk you through the procedure step by step . Hope this helps
@@AutelConsultancy Thanks for the response Curtis, I will do soon.
I would charge 200/250 im in fl,miami
We charge nearly 100USD
You did not mention how much the dealer charge.
HI Sameh, It really depends on which region / market you are in. One of my clients in new york charged 300 USD as the dealer wanted to charge 600 for the procedure. Im not sure which market you are in but I personally think your charging to low. ( unless everyone in your market is charging low programming prices) . You should charge for your talent , not your clients budget.
i would charge 1800