CBR1000rr Wrecked Bike Rebuild
Vložit
- čas přidán 5. 09. 2024
- I purchased a Wrecked 2007 Honda CBR1000rr and rebuilt it back to stock. It did not require too much major work, i replaced headlights, upper fairing stay, clutch reservoir cap, fairings, and had to sand and paint the rear rim and both motor cases.
Instagram- / benjamminoutdoors
Facebook- www.facebook.c...
Patreon- www.patreon.co...
email- Benjamminoudoors@gmail.com
Filmed with iPhone 7 Plus
I respect this man for one thing and one thing only he did the whole rebuild in one vid where other CZcamsrs would drag it on for like part 1 part 2 part3 etc
Dylan Wilde it’s because this isn’t a fucking rebuild. He just repaired a few minor things that anyone can easily do. But other youtubers have to take apart most of the car and replace and rebuild everything. The only thing this guy “rebuild” was the speed gauge housing
@@jomcpetv1013 fuck off with ur negativity
dude you are so correct with what youve said. just ignore that one fool . ive visited his page i haven't seen any motorbike rebuilds or any videos on his page he is just a big mouth armchair general
JoMcpeTv you wasn’t even being negative tho just stating facts 🤣🤣🤦♂️
its hard work either way and its the vloggers that are annoying, "we are doing this non-related thing first" video.
Nice rebuild! Cosmetically sound. I recommend you check front end for alignment. Take tension off lower triple clamp pinch bolts and axle nut and plunge the front end for self realignment.
Calin Opi thanks for the tip I’ll keep that in mind next time.
Not
Great "no nonsense" approach - and a great result - nice job!
Hey man I just felt the need to congratulate you on a job well done and making this blade nice and sharp again. 👌
Poor guy, i feel for him! Hope he get's 100% well! All the best!
I liked the Redbull look more than the white Repsol.
BlueMatterZ ツ same
Orange repsol for me
DEFINITELY!!!
I'd prefer Redbull look for some reasons, but i love this bright and refreshing look too. So, either way i can't judge the look just because the bike looks super awesome!
the tarmac loved it too..
You did great!!! I crashed my Honda cbr 600 rr most of my ribs are broken but I'm grateful to walk away with that from could have been 💯 I'm going to work on mine and this video helped because it was similar damage. Thanks again!
AMO RELOADED sure man! Sorry to hear about that tho.
Nice job! Went to high school with your Mom. She recommended I check out your channel! I have 5 bikes at home.
Great video, but that loud 4 chord music is driving me nuts.
same bro
Dennis Holm LoL sorry
i was already listening to good music.. the video was muted by default :P .. got to know that the music was bad from your comment only xd
Enjoyed the music a lot.
Same but its better than without music.
Great video, you are a young guy with lots of talent. Keep doing what you enjoy and don’t let the negative jealous people ever get you down 👍🏻
Dwayne Thomas thanks bro!
I don’t see negative comments here. I see a lot of concerned people viewing his repair work. Whether he’s keeping the bike or selling it, the first and foremost biggest question should always be “Is it safe to ride?” Especially after a crash. Check the alignment, check the suspension to see if the forks are suitable for riding or if that too needs to be repaired, check the engine, plugs, drive, etc...he’s young, he’s determined which is great but he should definitely be looking into all the small pieces and not just the cosmetics.
@@captaina4458 hater
keveshan naidoo more like an experienced rider and mechanic to know the difference between a quick fix vs a legit rebuild. Trust kiddo I’ve been through the loops to know what’s the better choices to make on crashing bikes, rebuilding bikes and selling safe bikes. So before you go off popping your mouth calling someone a “hater” you should take into consideration what the message is. 😎
@@captaina4458 he probably checked the forks already I mean who wont check that that's the first thing to check on a crashed motorcycle
Your work is 100% legit especially for the wheel.
I have to notice that torque for screws is important but perhaps you have a calibrated limiter on your electrical screwer .
Great job.
Love from kohima, nagaland India🇮🇳
I just love the sc57, for me it is one of the best looking bikes ever.
Glad you didn’t “build” another “street fighter” like most wrecked sport bikes end up, nice fix, cheers!!
Carlos Google Maps lol thanks, I like my variety! My custom r6 was a fun build too
Looks good but I would have pulled the tire off the rim to clean it up.
Wow, loved the music and showing how you did it! You make it look so easy. Keep the great videos coming brother!
it turned out way better than the original beautiful rebuild
a dream bike that i can only ride in my dreams. you are lucky to have that bike.
Nice rebuild, However I would of replaced pegs and rusted bolts (or cleaned them up), the only thing that bothered me the most was the tire section those are a life line I would of popped off and replaced as they took damage and leaving the tires on the rims your not able to inspect inner tire damage. Non of this is meant to knock or say any negative keep up the great work.
John Church yeah there was only 2 bolts that had rust and that was the frame slider bolts, and the pegs were perfectly fine, you’re right tho I probably should have inspected the tire better but it looked really good from the outside.
Great video and good job buddy 👌🏼👍🏼💪🏼
Spree Pirat thanks man!
The feelings this guy will get riding his bike again is gonna be something else...
Love that paint scheme. Good choice.
Love the silver/white repsol combo way more than the orange/red/white. Looks way cleaner in silver!
Song: Empire Of The Sun - Walking On A Dream
You're welcome.
thanks
Nice
But what remix is that ?
Razz x Zack remix
thanks dude
Nice rebuild! I liked that you removed the covers and painted them, but you can color match the oem stuff pretty well and they definitely are not glossy. Also the rear axle was installed backwards!
I was expecting a motor tear down. But its still a great vid man keep up the good work!
Used to own this exact bike. They are so sweet and were so fast for their time. Loved the body styling, headlights, and undertail exhaust over the new bikes as well. Great build!
Now see...this is the kind of video we need to see more of. Yeah people are fixing cars trucks and boats but no one is bringing back crashed bikes and copart is full of cheap bikes!
I remember when I was 16 and working on my moped in the driveway, I spent more time sifting through the gravel for nuts and bolts the actually making progress on what I was supposed to be fixing
Yeah it’s sucks 😂 I’ve done that many time
Looks gorgeous... Love my Honda's and blades
man thats cool buying and fixing a mates bike when he cant ride, he will be happy knowing the bike is in good hands
this dude makes me believe in humanity.
I give this guy respect. I can't even muster the strength to lube the chain on my bike....... that's how lazy I am. Hahaha.
Great job, strong work bringing this back. What paint and clear coat did you use? Also one minor thing, you put your rear axle in backwards, the threaded end with the nut should be on the Brake side of the wheel, It looks like it shouldn't do any harm but just fyi.
thanks for posting this.
Paul Lucas The rear axle to my knowledge it shouldn’t effect it no matter which way it goes in, i did realize that I did swap sides I’ll make sure I put it in the way it’s designated by the manufacturer next time, And I used some paint at the auto parts store believe it was duplicolor. Thanks!
I was about to say the same thing about the axle.
Man U are really inspiring me to buy a wrecked bike and rebuild it hence not knowing anything about rebuilding a bike 😂
i enjoy watching the video
as it's my bike
Hey bro, hope you get better soon.
it's not your bike.
@@elismigel707 It's definitely not his bike, or the same model as his. He doesn't even own this bike lol
what a prick.
To make it worse, all of his videos are stolen
@@LiquidSnakeSSJ4
Yeah Yeah Yeah
Keep bothering me, Knowing that I did not talk to you, you idiot
Nice video! I advise you to check the wheel axle, you have mounted it backwards.
3218624101gustavoadolfomotoadeseaadolfo hoy
Que cosa más hermosa 😍😍 ya quisiera yo tener la suficiente plata para poder hacer lo mismo. Saludos
Personally I would have bought that Red Bull Infinity fairing again stylewise. Looks like the owner just put nice things on and crashed it. Just look at the Yoshi, seems to be brand new.
But well made video on the rebuild, just happened to me with my 08 600 RR aswell. Only a low speed slide on the right side, so not too much broken. (clutch cover looked like yours, indicator broke off, brake pedal bent, bar end cap (if you wanna call it that) ripped out, throttle assembly broken and rubber cut/melted away, and basically the whole right side fairings at tank height looking like shit due to the scars.
Just waiting on the fairing kit to arrive, sits at the german customs for a week now. Waiting will be worth it, since its another Rothmans replica kit.
Painting without primer? Do you use special paint?
that made me cringe a little...
Well done
I use the same paint as him it's an anodized kind of paint but it works better with bare metal, there is a can that's an adhesive for that kinda paint kinda like a primer but just grabs that paint better, completely clear
@@teamia3901 Bruh that project source spray paint from Lowes that costs 99 cents a can....not even heat rated paint. That shit is going to peel and look terrible almost instantly
@@andrewschafer2544 The cans run about 6ish dollars at Rileys that are heat rated but he is putting it on without any prep work or without paint adhesive that shit is Gunna scrape hella bad rip
Thats a really good job. Just goes to show what you can do with a little paint and new fairings. I am looking to get a wrecked bike myself and do this. I love wrenching but have a new bike not much to do. Again good job.
Song - Walking On A Dream (Razz X Zack Martino Remix)
thx m8! (}{:D}
excellent work my friend... i would invest in some JIS VESSEL screwdrivers...you'll see the difference...big respect from Mauritius Island
Not that i am a hater but. Rebuild??? It just reminds me of when i was 8 years ols and sprayed m bycicle... When it looks good, it must be good?! Right?? The paint on engine might look good now, but when been running for some time it will flake of, and why not take of tyre before paint.. And what about getting the frame checked for straightnes?? I think a lot of theese i fixed my 1000 dollars porrsche and so on videos, makes me get the chills, many times people know nothing about what they do... But it looks great...most times..... But anyways, great efford in doing this honda...
Great rebuild repair. And damn near 2 Million views! Learned enough on a few videos now to do one myself. Thanks great inspiration! Cant wait in Seattle.
Music sounds like it’s from the same guy who made crab rave
I rebuilt a 2006 ZX6r that was crashed by my brother. Sold it a couple years later for a brand new grom. Never looked back. 😊
Why do people hype up those little pieces of shit
മച്ചാനെ പൊളിച്ചു 😍
Love from Kerala
Pinnallah....... ❤️
Great video. Only thing I would do differently is tell people what kind of drill and sandpaper you used for us guys that don't have a clue what specific tools and what else to buy if we want to do something like this. I'd love to start doing this type of work for a living or even for a hobby and taking the time to say, "hey I'm using a xx# of grit on this part" would help us newbs out a lot.
More cosmetics than rebuild. It wasn't damaged very badly.
LonleyGuns no it wasn’t totaled but it still needed a lot of stuff
If you watch his videos, you know its most cosmetic stuff replaces, because its often only cosmetics that gets destroyed when crashing
@@mathiasnkristensen I agree with You about destroyed covers, are the most damaged parts visually after crasch. But after every crash it is essential to measure main construction points, especially when vehicle is from aftermarket. Process of rebuild is descripted as measuring -> diagnosis -> range of repairs -> repair or regeneration -> repalce -> measuring after process (it is short version). So repalcing few covers is a part of rebuild, not full. I want You to know, that I don't say, that it was bad work in the video. It was good to see effet after such damaged parts, and vehicle looks amazing in the end.
Mathias NK I’m actually moving soon and I’ll have my own shop so I’ll beable to do more serious builds.
@@dal113tek wdym idiot(s)? I support him. I didn't say anything disrespectful or anything bad.
My day was started to watch this type of videos
this video is a prime example of why you should be cautious buying honda sport bikes
what do u mean?
why
They can be totalled and you wouldnt know
@@davidstancu2963 You can check the bends of the upper fairing stay and frame before you buy the bike
Great work bro still building my 03 r1 that was crash. Had to replace everything but the frame and motor. Enjoy bro.
Gregory Springfield sounds like a bad wreck!
@@Benjamminoutdoors yean man he was travel down the rode when a lady just pulled out on him he dump the bike and broke his collar bone, three ribs and a fractuce pelvis. Bike was total out due to fairing damage. But she been complete rebuilt.
Also us to have the 07 fireblade blue and yellow love the ride of the Fireblades. Enjoy man. That repsol white is hot.
Are you using spray paint? Seriously. Wouldn't It Be a Motorbike for Sale? This is the best powder paint. It is a cheap, quality and durable solution.
screw those other keyboard warriors. this man deserves a LIKE from everybody for his effort of rebuilding the wreck bike!
song : Empire Of The Sun - Walking 0n A Dream (Razz X Zack Martino Remix)
ma men : thanks
@@JizzyTv you wlcome :D
Is that a SUPRAAA broo?😂
I love everything he does and anything he is doing should be something we need to take in practice don't hate on his work appreciate everything he is showing us thank you so much brother thank you for the information and visual detail you do to bikes
Why don't you prime your metal before you spray ?
Some 1K products are designated by manufacturers to use directly on metal. It is dedicated for non representative parts, but it isn't professional. For full coat isolation by epoxy primer is required.
id think it would heat the engine up more or faster? that would be my guess, cuz i heard that it happens..
@GET IT that is why i put a question mark, and that is why i said " that would be my guess" because i was unsure..
congratulations men good work i am brazilian and really liked it
Great job dude, a question though.. Did you not mount the rear wheel axle in the opposite direction ? haha
He did.
Yup
Is that gonna affect anything?
👍👍👍👍👍
brilliant . It looks factory just un-created strait out of the box .
Always change tires after Crash !!!
Whyy
@@jeandregroenewald3190 They can be Damaged after Crash. Do not save money on tires
❤
Gotta check for a buckle in the rim. And remove tyre to clean the bead, after all the gravel that got in there.
Youve got greatness written all over.......Awesome restoration work.
ViSKy Vlogs thanks!
I hear forza horizon 1 music, the nostalgia is real.
slammed 🙌🏻🙌🏻🙌🏻
I‘m playing Forza Horizon 3 at my break I read this 😄
Looks fantastic!! Well done! I love the white colour. Please do me a favour and treat yourself to a nice new set of screwdrivers..... You deserve it! Well done! Steve - Auckland, New Zealand :-)
just wish you are my neighbor, i'll ask you to rebuild my zx10.
Не бит, не крашен. А то что едет в сторону, это не беда. главное пластик целый и диск заднего колеса блестит.
friend when agent loves our bike, we do everything for her
Where did you got the new case for the speedometer? Need a new as well for my rsv4
René eBay
3218624101gustavoadolfo moto moyzsaeythoy
yeah dont need the music better without so people can concentrate on what your doing
Great job, great video, love the new colors...may want to take that rear Tyre out completely out of the rim to see what is inside (just in case)...thanks for sharing !
I like it :)
Good job dude.
great job on the rebuild. It looks fantastic. couple of things I noticed you didn't do however. I would advise putting plumbers heat wrap on the inside of the mid and lower fairings. It will protect the fairings from the engine heat. Otherwise you will melt those fairings. Also you should use locktight on most of the screws you put on or they come loose over time. great job though. keep it up.
hedayatomid Yes I put heat shield on the inside of fairings I just didn’t show it, and Honda doesn’t recommend putting Loctite on bolts like the case covers so I don’t, I only put it on stuff that really needs it
Omg ilike your bike men,so Beutifull😍
Thank you for giving the bike a new better life
Good to see you rebuild the bike, trying to hear what you are saying but I get blasted by that annoying music dude. Tone it down next vid. Lose viewers like that.
Wow, the fairing makes the difference, great job
Your new paint didn't rhyme with the existing one
It's generally a better idea to buff the rear/head lights to gloss after wetsanding them, you get a clearer more durable surface that way. You can even handbuff them using meguiar's ultimate compound or something similar.
Lol yeah I’ve started doing that since, I didn’t realize I could till I saw someone do it a few months ago.
damn rookies. making stupid decisions on proper torque with a dewalt driver. 😟🤯🤔 good luck with that.🤞
Jason Bielecki it’s just the case cover lol, oohhhh no it’s the end of the world as we know it!!
Why should anyone use some kind of torque specs for an engine case?
Miguel Covas technically everything has a torque spec but the cases to me don’t really matter, I’ll torque to spec for what I think is important.
@@miguelcovas3295 because if unequal torque is applied u can leak oil or over tighten the bolts which then turns into a stripped bolt or threads. just some insight. I have over 20 yrs experience with motorcycle mechanics. u will learn the hard way😉 good luck🤞
Jason Bielecki I’ve been on motorcycles since I’m 7 never stop riding and almost never let anyone touch my bike I’ve done every repair that you can do on a motorcycle and never had to torque a engine cover, so maybe I’m lucky, I’ve rebuild the engine of an 2012 R6 2 years ago after a bad crash and the bike is perfect no striped bolts no cracked cases no oil leaks, I’ve just changed my cam shaft bearings in my Ducati 1100 again no leaks and no issues whatsoever. So I consider myself very lucky. With the Ducati I even learn that the clutch press does not need to be torqued and yes I’ve consulted a Ducati engineer because I did not find any specifications on the repair manual. So while you can make some sense you being a mechanic for over 20 years you know that it is not really needed. Any way respect to you and keep up the good work!!!
Definitely one of the best back from the dead rebuilds. The color you had done is beautiful. Just wrecked about a week ago.8-12 week recovery, bike is in amazing shape. It's a 2018 cbr500r, looks like more than a 500, I put some effort into it. Now wondering what to do. About three oem fairings to buy but I was also thinking about getting an aftermarket kit and go a complete color change and still have the oem. Pride is hurt still fresh, but was wondering what you thought, or anyone that has an opinion or some ideas. Biggest problem so far is locating aftermarket fairing kit. Thought it would be easier. Anyway, any suggestions would be so welcomed. Stay safer than me
not a rebuild, just changing fairing and some parts.
I could watch these over and over awesome bud. Usual big shouts from Scotland
kick the one who added the music. that is not compassionate. because we see what you do.
and without the music it was almost good
Best model of cbr 1000 and 600 07. Who is with me?
I have to agree, I have one. 😊
No so much information on rebuild ....most just tasteless noise ( same call music)
Super! Looks better in white!
You put the rear axel in the wrong way around... And some other stuff your doing is just a bit sketchy. Wouldn't want to be buying that bike from you dude. Nice fixerupper if you are going to keep it, but if you're doing this for a profit than you're just half assing it... sorry mate
1.3 million views in 6 months! Nice job on the bike and video.
I know absolutely crazy! And more videos on the way!
Great job just buying a cbr1000rr tomorrow
Bel lavoro!! Bravissimo alla fine la CBR è diventata più bella di prima. Ciao a tutti Bubi da Adria
I noticed that you put the swing arm bolt in from the other side when you reinstalled the rear tire. Not sure if that is incorrect or not
3218624101gustavoadolfomoymotoadrmotofusvohoy
Bought mine guy broke his neck fork was shredded no gauge or lights but wasn’t any frame damage good to keep up on the fork rebuilds
Muy bien todo, mi única pregunta es ¿porque dejo los posa pie traseros, si tapo el asiento de acompañante? 😅
My dad had a 2006 fireblade and he use to race on the kylami race track but then the brakes failed and he crashed into a corner and broke his arm the bike looked terrible, but he fixed it eventually and sold it 3 years later because it was to old for his liking and I remember all of this even though I was only 6
It feels like I am watching my wrecked life rebuild
I‘m driving exactly the same bike. Just a few more scratches 😂
That's a great job Dr.Benjammin.
i hope the paint you used is a high temperature resistant paint else it will start bubbling in few runs , great job btw
RAJAT SAWARKAR I’m sure he did, seems like he has a bit of experience
@@thewanderer899 yeah he may have but the paint can i saw in video didnt seem like tht one ...well he did a great job on the bike though